YOTINO 16Pcs J-Head V6 Hotend Sets, All-Metal Hotend Kit+5 Pcs Extruder Brass Print Head+5 Pcs Stainless Steel Nozzle Throat Pipes for 3D Printer 1.75mm Filament Direct Feed Extruder (With fan, mini wrench)

YOTINO 16Pcs J-Head V6 Hotend Sets/5Pcs All-Metal Hotend Kit+5 Pcs Extruder Brass Print Head+5 Pcs Stainless Steel Nozzle Throat Pipes+Mini hexagonal wrench

High Temperature Resistance:
With PTFE in hot regions of our Hotend we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C(This temperature just be kept for a short time, otherwise the machine will burn out).

High Performance:
This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.

All Metal V6 J-Head Hotend Sets:
12V/40W heater(the temperature can up to 280℃, Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing (4mm OD and 2mm ID)
PC4-01 Tube Fitting
Specification:
Nozzle Throat Extruder Tube:
Outer Thread Type: M6 M7
Outer Diameter:6mm
Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Brass Nozzle Print Head
Color: Golden
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm/0.3mm/0.4mm/0.5mm

Package Incuded:
1 x All Metal V6 J-Head Hotend Sets
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat
1 x mini L-shaped hexagonal wrench

Product Features

  • 【High temperature resistance】Thicker thermistor NTC and high-quality heating rods, up to 280℃, 12V high-speed fan, rapid cooling to prevent NTC burnout, disconnection, heating rod aging fast etc
  • 【Simple installation】NTC with terminal connector, using without install, mini nickel-plated L-shaped hexagonal wrench, can be used in the synchronous wheel, coupling, heating block v5, v6 and other accessories
  • 【Anti leakage-material】Nozzle and tube connect seamless, prevent material leaking and blocking. Brass nozzle with a size slot, high hardness, good thermal conductivity, silking uniform, increase the melting rate and printing speed, smooth contact surface, to prevent leakage
  • 【Anti-blockage】High-quality 303 stainless steel throat pipes, high temperature, to prevent heat uploading, to avoid feed expansion in advance to solve the plug problem
  • 【Compatibility】Hotend is suitable for ABS, PLA and other traditional printed materials. Perfect applied for 1.75mm / 0.4mm Filament E3D Long-Distance Filament Bowden extruder

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

Leave a Reply