TRIGORILLA ANYCUBIC 3D Printer Rapid Resin 405nm for Photon UV Curing LCD DLP Printing 1L, Clear Green

It is widely used in many fields such as industrial parts, garage kits, craftwork design, education, archaeological model, clock and eyeglasses, etc. Please confirm that the UV wavelength of your 3D printer is 405nm.

Specification: Size: ~500g/500ml, 1000g/1000ml
Color: Black,White,Grey,Yellow,Green,clear, etc
Main material: resin monomer , photoinitiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Resin parameters: Solidify wavelength: 405nm
Hardness (D): 79.0
Viscosity (25C): 552.0 mpa.s
Liquid density: 1.100 g / cm³
Solid density: 1.184 g / cm³
Flexural strength: 23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequency: 14.2 %

Precautions:

1. Storage 1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment.

2.Usage: 1) Shake well before use. Avoid any direct sunlight during usage.
2) Do not put in the mouth. Keep it away from the children.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) For accident contact, please wash by plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.
6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues.

Safety Information: 1)Keep out of the reach of children and animals
2)Always wear gloves and eye protections before use to avoid direct contact with skin and keep room ventilated.
3)Do not be used for products intended for internal use or in contact with food or drink items.

Product Features

  • 【Quick Curving,Low Shrinkage and High Precision】: TRIGORILLA ANYCUIBIC UV resins can be rapid prototyping. It ensures the high precision of the print model with smooth finish. model with smooth finish.
  • 【Professional for LCD】: Special designed for LED light source to achieve better printing quality. Suitable for most DLP/LCD or SLA 3D printers
  • 【Excellent Fluidity】: With excellent fluidity, the resin can quickly infiltrate models and cure them into shapes, increase printing success rate, make it easier to clean printers and models.
  • 【Appropriate Toughness】: TRIGORILLA ANYCUBIC UV resins have good combination of hardness and toughness, which brings easy removal of the model and printing details.
  • 【Great Stability, Bright and Stunning Colors】 : After cured, it shows good stability in moist and corrosive environment. With high quality pigments and photo-initiators, the models printed with resin have a very pure and stunning color effect.

Check Out Our Website For Details…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “TRIGORILLA ANYCUBIC 3D Printer Rapid Resin 405nm for Photon UV Curing LCD DLP Printing 1L, Clear Green”

Leave a Reply