12V/40W heater, the temperature can up to 280℃ (Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing 4mm OD and 2mm ID
PC4-01 Tube Fitting
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Filament Diameter: 1.75mm
Material: Stainless Steel
Type: Extruder Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm
Note: Compatible with all 1.75mm V6 Makerbot 3D printer.
1 x All Metal V6 J-Head Hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat
Before installation, it must be printed the support for the thrust fork that will be fixed on the machine body, and the support bracket of the extruder and the cooling fan of the extruded material. Note: if you only print PLA, you can also use it for the support, if you also print in ABS, then use the latter, because the heat of the plate tends to very soften the PLA with melt results.
If your printer is Anet A8, please note: the fan wire is short, so it must be lengthened. The 2-pin JST connector of the thermocouple is not suitable, you’ll have to replace it with a 3-pin JST or a patchwork with the original one (the polarity is doesn’t matter).
- V6 all-metal printer head, 100% brand new and high quality.
- 12V/40W heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280℃, 12V high speed fan, lose heat quickly.
- Compatible with all 1.75mm V6 Makerbot 3D printer.
- Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
- Package Include: All Metal V6 J-Head Hotend Full Kit + 10 Pcs Extruder Brass Nozzle Print Head + 5 Pcs Stainless Steel Nozzle Throat