Are you looking for better quality GT2 pulleys to help you 3D printer up and running?
The timing belt made of high quality rubber, but the belt have fiber inside. (Can cut into it at a slight angle and can see some fibres embedded in the rubber.)
The pulley wheel made of Aluminium, can minimizes the likelihood of belt slippage, high positioning accuracy,constant speed ratio can be obtained, is stable and can absorb vibration.
20 teeth contact with the Ribbon minimized, that the probability of the belt slip.
Good length of good quality GT2 belt and adequately replaced your worn out ones.
Also suitable for dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders, ect.
It is strictly forbidden to forcibly break and bend the timing belt excessively to avoid damage to the strong layer.
Store in a cool place and avoid contact with oil, water, chemicals
Please shorten the center distance during installation, relax the tensioning wheel, It is not possible to force the hard pull of the lower flange of the timing pulley
At the time of starting, the center distance changes, the timing belt is slack, and the tooth skipping phenomenon occurs.
It should be checked whether the timing pulley frame is loose, the positioning of the shaft is out of alignment, and then adjust and strengthen
Length: 5 m/196.85 “
Width: 6 mm/0.23″
Diameter: 16 mm/0.62 “
Hole Diameter: 5 mm/0.2″
Height: 16 mm/0.62 “
8 X 5mm 20-tooth pulley timing wheel
1 X 5 m GT2 timing belt
14 X Screws
1 X Hex Wrench
- GT2 pulley and belt kit is designed specifically for linear movement and precision, high positioning accuracy. High transmission efficiency, compact structure, accurate positioning and quiet and efficient transmission. Help to improve print quality.
- Combination of belt transmission, chain and gear drive,use high-strength structural design, anti-extension, anti-jumping, no slip, constant speed ratio can be obtained, is stable and can absorb vibration. Do not need lubrication.
- Timing belt is made from high quality rubber, the material of pulley wheel is aluminum. The surface is anti-oxidation treatment, not easy to rust. Reusable, durable, solid, flexible, low noise and high wear resistance. No pollution.
- 3D printer belt and pulley are worked together, easy to use. Round tooth ensures the belt tooth perfectly and accurately into the pulley groove, profile guarantees the belt and tooth fits smoothly. Extended service life.
- Multipurpose timing pulley belt set perfect for multi-axle transmission, widely used in 3d printer, anet a8 3D printer, inkjet printer, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, conveyor, bonders，gear shaper or other machinery transmission occasions.
Visit The Website For More Information…
MK8 0.4mm Nozzles:
Thread type: M6
Output diameter:0.4mm;Input filament diameter:1.75mm
Compatible: 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer
Type: anti-Static,non-Magnetic curved precision tweezer
Tweezer length: 120mm
Wrench length: 120mm Weight:48g
Nozzle and 3D printercleaning kit is a durable kit for different purposes; removes excess plastic and removes jams with high precision, and is also suitable for general maintenance of the heatsink section.The wrench makes it easier to install and remove the nozzle.
10 x 0.4mm Brass Nozzles
10 x 0.35mm Cleaning Needles
5 x 0.4mm Cleaning Needles
1 x Curved Precision Tweezer
1 x Plastic Bottle
- Total 27 Pcs include: 10 Pcs 0.35mm cleaning needles, 5 Pcs 0.4mm cleaning needles, 10 Pcs brass nozzle,1 Pcs precise tweezers, 1pcs Wrenches, 1pcs plastic bottle.
- Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic bending precision tweezers.
- Needle: 15 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.
- MK8 nozzles: material:brass,thread type: M6,output diameter:0.4mm;Input filament diameter:1.75mm,Compatible with 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer,supported:ABS/PLA/PETG/Carbon Fiber
- Wrenches: Wrenches make nozzle installation and removal easier. Special spanner can help you adjustment 3D Printer and change extruder nozzle more easy.Nozzle spanner suitable for nozzles with a diameter of 6 mm, for MK8 nozzles.
Click Here If You Need More Detailed Info…
Question: does the belt have fiber inside or isit pure rubber?
Answer: The belt have fiber inside.
Question: What is the best method to join the belt?
One way,Probably best to get a length that works for your application, rather than trying to join them.
Another way, Overlap the ends of the belt and cut the upper end teeth for a perfect fit. Then glue them with glue.
Or put the ends together, stick with a small flexible and sturdy strap.
GT2 belt designed for linear movement, uses profile with rounded teeth so that the belt teeth are inserted
With softness and precision in groove to avoid slipping. The belt can not move in the opposite direction in the groove of the pulley.
The 20-tooth belt has at least six teeth in contact with the pulley, reducing the possibility of slip rings.
In comparison with a 16 tooth belt, there are more contact surfaces and more stable.
Suitable for multi-axis transmission, without lubrication.
Timing belts and pulleys are popular choices for Reprap, Prusa, MendelMax and 3D printer printers.
It is also the perfect accessory for engraving machines, dishwashers, packaging machines, motorcycles, automobiles, dryers,
inkjet printers, conveyors, bonding machines and other small precision mechanical transmissions.
Belt GT2: material: rubber
Length: 5 meters
Width: 6 mm
GT2 pulley: Material: aluminum
Diameter: 16 mm
Diameter of the hole: 8 mm
Height: 16 mm
The package includes: 1 gear belt GT2 + 1 key L + 8 pulleys GT2 8mm + 16 screws
Attention: The space between teeth after the connection must be the same as before
- [ Prevents Slippage ] 3D printer timing belt move without slipping, allow the constant time ratio to be stable and reduce vibration, minimize the risk of belt slippage. The GT2 series is designed for linear movement.
- [ Good Transmission ] GT2 pulley and belt has high transmission efficiency, compact design, toothed belt kit 3D printer equipped with small teeth inside, ensuring that the belt teeth are inserted perfectly and precisely into the disc slot.
- [ Combination of Belts and Pulleys ] A combination of the GT2 timing belt and 8pcs gt2 pulley 8mm bore works perfectly on the 3D printer, for different needs, the belt can be cut freely.
- [ Application ] Ideal for DIY projects, motorcycles, dryers, inkjet printers, conveyor belt, Nema17 motors, Geeetech printers I3W, Prusa i3, Anet a8, CTC Prusa i3 Pro B, RepRaps, 3D printers and CC etc.
- [ What You’ll Get ] 5M gt2 timing belt with a width of 6 mm, 8pcs GT2 pulley wheel with an internal diameter of 8 mm, external diameter of 16 mm (20 teeth), 1 key and 16 screws.
Click Here For More Information
- –Eco-friendly material, firm and wear resistant.
- –A wonderful choice for your 3D printer.
- –Perfect performance to keep printer works well.
- –Easy to install and convenient to use.
Visit The Website For More Information…