E3D Heating Block Hot End 3D Printer Accessories Aluminum Sandblasting Oxide Processing This heating block is made of aluminum and under sandblasting oxiding processing. It applies to the hot end and other similar E3D hot end, the thermistor socket replaced within M3 threaded holes + interpolation (both sides, you can choose to use NTC thermistor or M3 threaded resistance). Suitable for: Frame,Heating/Cooling Package size: 3.6 x 3.6 x 3.2 cm / 1.41 x 1.41 x 1.26 inches Package weight: 0.032 kg Product size: 1.6 x 1.6 x 1.2 cm / 0.63 x 0.63 x 0.47 inches Product weight: 0.0090 kg Package Contents: 1 x Heating Block for 3D Printer Extruder100% Satisfaction Guarantee : 90 days Return & Refund policy without hassle; It takes about 7-10 days in transit.
- Product size: 1.6 x 1.6 x 1.2 cm / 0.63 x 0.63 x 0.47 inches
- This heating block is made of aluminum and under sandblasting oxiding processing.
- Package weight: 0.032 kg
- It applies to the hot end and other similar E3D hot end, the thermistor socket replaced within M3 threaded holes + interpolation (both sides, you can choose to use NTC thermistor or M3 threaded resistance).
- E3D Heating Block Hot End 3D Printer Accessories Aluminum Sandblasting Oxide Processing
Detailed Information available on our Homepage…
◆Please avoid long exposure to strong light (such as sunlight), fire prevention, dry place, moisture-proof. After unsealing, please seal and save together with desiccant, so as to avoid material waste due to the influence of moisture on the printing effect
◆1X3D printed material（200g）
- Material: ABS, Specification: 1.75mm
- Low shrinkage, thermoforming dimensional stability.
- Our filament is always round, with no oily residue, no air bubbles, no kinks or breaks.
- 3D filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm. Extrudeds with great precision, which means better looking prints, improves reliability plus less calibration plus fewer extruder failures. Compatible with most 3D printers currently out on the market.
- Package Content: 1X3D printed material（200g）
Click Here For More Information
Curtain material: polyester.
Great for your bathroom. Waterproof, mold-proof and fade-free.
Simple and elegant models, bright colors, suitable for your bathroom!
Vertical feet, nicer.
Machine washable and easy to clean.
- Material: Made of polyester fiber, high-strength fiber, wear-resistant, not easy to fade, easy to clean!
- Pattern: We use environmentally friendly high-definition printing technology to ensure the beautiful pattern!
- Easy to install: It is designed with hooks for durability and easy disassembly.
- Role: These curtains help protect the floor from getting wet during showers!
- Tip: If you have a beautiful pattern, please contact us and we will customize it for you! For more patterns, please search for “YLXINGMU”, thank you!
Check Out Our Website For Details…
More Colors: Grey,Black,White,Transparent Green,Transparent Yellow
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Hardness (D): 79.0
Viscosity (25 ℃): 552.0 mpa.s
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3
Flexural strength:23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequency：14.2 %
Shelf life: 1 year
Features: UV light will solidify the resin
1. Storage method:
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
- Professional LCD molding resin. ▶Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
- High-speed solidify. ▶This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
- Strong adhesion of the model and easy to detach after forming. ▶Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
- The material is rigid and tough. ▶Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
- Model’s performance is stable. ▶The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.
Check Out Our Website For Details…