Mavis Laven Extruder Brass Drive Gear, Brass Feed Extruder Wheel Drive Gear for MK7 MK8 Extruder 3D Printer Accessories, 26/40 Teeth(26teeth)


Color: Gold

Material: Brass

Teeth: 26 Teeth/ 40 Teeth (Optional)

Outer Diameter: Approx. 11mm/ 0.43in

Inner Diameter: Approx. 5mm/ 0.2in

Size: Approx. 11 x 11 x 11mm/ 0.43 x 0.43 x 0.43in

Package List:

10 x MK8 Extruder Gear (Only gear, other items on the pictures is NOT included.)

Note: Please allow 0-2mm error due to manual measurement. Thanks to your understanding.

Product Features

  • This is a durable drive parts used for MK7/ MK8 extruder, suitable for most 3D Printers.
  • High bearing capacity, ensure your printer working smoothly.
  • Made of high quality brass, no rust, and no corrosion, durable to use.
  • Light and portable, easy to install.
  • 10pcs a pack, high strength and high precision.

Detailed Information available on our Homepage…

V Groove Bearings,20pcs V-shape Groove Wheel 5mm Bore 625 Bearing Pulley Accessories for CNC 3D Printer

Main Material: POM
Shape: V groove
Bearing Type: 625
Inner Diameter: 5mm
Quantity: 20pcs
Weight: 253g(approx.)

Package Includes:
20 x Wheels

Product Features

  • ❤Made of high quality POM material, these wheels are durable and sturdy
  • ❤Wheels have good physical, mechanical and chemical properties, especially have great wear-resistance
  • ❤The bearings of these wheel are 625, with a 5mm inner diameter
  • ❤There are total 20 pieces of wheels in one set, which you may use for many projects
  • ❤They are normally used for 3D printers, CNC machines and many other machines

Detailed Information available on our Homepage…

Tenlacum 10Pcs/Pack POM Material Big Pulley Wheel with Bearings for V-slot 3D Printer Part


Type: Pulley
Outside Diameter: about 24mm
Bore: 5mm
Thickness: about 10.23mm
Size: about 24*16*10.23mm
Material: POM
With Bearings: YES
Bearing: 625zz bearing

Quantity: 10Pcs

Packing includes:

10 x Big Pulley Wheel Poom with Bearing 

Product Features

  • Type: Pulley
  • Outside Diameter: about 24mm
  • Bore: 5mm
  • Thickness: about 10.23mm
  • Material: POM

Visit The Website For More Information…

NACTECH GT2 Timing Belt 5m Pulley Belt 6mm Width + GT2 Timing Belt Pulley 20 Teeth Pulley Wheel 5mm with Wrench Screws for Anet A8 3D Printer CNC Parts

Are you looking for better quality GT2 pulleys to help you 3D printer up and running?
The timing belt made of high quality rubber, but the belt have fiber inside. (Can cut into it at a slight angle and can see some fibres embedded in the rubber.)
The pulley wheel made of Aluminium, can minimizes the likelihood of belt slippage, high positioning accuracy,constant speed ratio can be obtained, is stable and can absorb vibration.
20 teeth contact with the Ribbon minimized, that the probability of the belt slip.
Good length of good quality GT2 belt and adequately replaced your worn out ones.
Also suitable for dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders, ect.

Warm Tip:
It is strictly forbidden to forcibly break and bend the timing belt excessively to avoid damage to the strong layer.
Store in a cool place and avoid contact with oil, water, chemicals
Please shorten the center distance during installation, relax the tensioning wheel, It is not possible to force the hard pull of the lower flange of the timing pulley
At the time of starting, the center distance changes, the timing belt is slack, and the tooth skipping phenomenon occurs.
It should be checked whether the timing pulley frame is loose, the positioning of the shaft is out of alignment, and then adjust and strengthen

GT2 Belt:
Length: 5 m/196.85 “
Width: 6 mm/0.23″
Material: Rubber
Color: Black
Pitch: GT2
GT2 Pulley:
Diameter: 16 mm/0.62 “
Hole Diameter: 5 mm/0.2″
Height: 16 mm/0.62 “
Teeth: 20
Material: Aluminum
Color: Silver
Package include:
8 X 5mm 20-tooth pulley timing wheel
1 X 5 m GT2 timing belt
14 X Screws
1 X Hex Wrench

Product Features

  • GT2 pulley and belt kit is designed specifically for linear movement and precision, high positioning accuracy. High transmission efficiency, compact structure, accurate positioning and quiet and efficient transmission. Help to improve print quality.
  • Combination of belt transmission, chain and gear drive,use high-strength structural design, anti-extension, anti-jumping, no slip, constant speed ratio can be obtained, is stable and can absorb vibration. Do not need lubrication.
  • Timing belt is made from high quality rubber, the material of pulley wheel is aluminum. The surface is anti-oxidation treatment, not easy to rust. Reusable, durable, solid, flexible, low noise and high wear resistance. No pollution.
  • 3D printer belt and pulley are worked together, easy to use. Round tooth ensures the belt tooth perfectly and accurately into the pulley groove, profile guarantees the belt and tooth fits smoothly. Extended service life.
  • Multipurpose timing pulley belt set perfect for multi-axle transmission, widely used in 3d printer, anet a8 3D printer, inkjet printer, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, conveyor, bonders,gear shaper or other machinery transmission occasions.

Visit The Website For More Information…