3D Printer Parts Version of Aluminum Cross Slide 4 Nozzle Extrusion Head for 4mm Tetrafluoro Tube for Ultimaker 2

Description:
Ultimaker2 version of the four-nozzle extrusion head cross aluminum block
Incorporating the advantages of E3D,
Suitable for the majority of DIY design enthusiasts
Linear bearing shaft center distance is: 18mm

Specifications:
Material: Aluminum Alloy
Color: Silver
Net weight: Approx.200g
Product size: Approx. 48*33*33mm/1.88*1.29*1.29”
Center distance of linear bearing axis: Approx.18mm/0.7”
Pneumatic connector: PC4-01
Applicable: for Ultimaker2 3D printer, suitable for 4mm tetrafluoro tube

Tips:
This accessory is only part of the aluminum block (excluding quick connectors, hoses, heating blocks, nozzles)
Weighs about 200g
Pneumatic connector specification is PC4-01, suitable for 4mm PTFE tube

Product Features

  • Applicable: for Ultimaker2 3D printer, suitable for 4mm tetrafluoro tube
  • Made of high quality materials for long life
  • Incorporating the advantages of E3D
  • Suitable for the majority of DIY design enthusiasts
  • Linear bearing shaft center distance is: 18mm

Visit The Website For More Information…

TUPARKA 15 Pieces 3D Printer Extruder Parts Set, include PTFE Teflon Tube, Heating Block Cotton, PC4-M6 Quick Fitting, PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament

Specification of PTFE Teflon Tube
Material: PTFE (Poly Tetra Fluoro Ethylene),Density: 2.15-2.20g/cm3 Heat resistance, up to 260℃
Outside Diameter: 4mm, Inside Diameter: 2mm
Color: White
Length: 2m

Specification of PC4-M6 Fittings
PTFE Tubing OD: 4mm
Thread: M6/3mm
Material: Copper, Plastic
Color: golden+blue
It supports turn 360 degree freely, convenient to disassemble

Specification of PC4-M10 Fittings
PTFE Tubing OD: 4mm
Thread: M10/6mm
Material: stainless steel,Plastic
Color: black+silver

Heater block cottons
Recommend Safe Working Temperature : <300°C
Note: you can Punch Holes or Cut fit size to the cotton.
Heat preservation, keep heater block and consumable work better.
Size: 2.76in/70mm x 0.8in/20mm x 0.08in/2mm (+/-0.05in)

Widely use for connecting Bowden extruder , PTFE fittings

Easy to Disassembly
Press and hold the blue or black part of the quick fitting and pull out the tube

Attention:
Small parts, keep away from children

Package including:
3 * 1M PTFE Teflon Bowden Tube
3 * PC4-M6 Fittings
3 * PC4-M10Fittings
6 * Heating Block Cotton

Product Features

  • Package includes:3 pieces PTFE teflon tube (1 Meters), 6 pieces heating block cotton, 3 pieces PC4-M6 quick fitting, 3 pieces PC4-M10 straight pneumatic fitting push
  • Teflon tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, anti-oxidation, anticorrosion
  • Heating block cotton is manufactured from ceramic fiber paper and High Temperature Film as main raw material

Visit The Website For More Information…

PoPprint 1M Heating tube 6 * 20mm 12V 50W Ceramic Cartridge Heater Reprap&Mendel For HotEnd J-Head 3D Printer Parts

Description:
Voltage:12V
Power:50W
Size:6*20mm
Length:1m
Heater Head Material:304 stainless steel
Maximum Heating Temperature:up to 350 degree

Note:
1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
2.From the original 40W power to 50W, therefore, the maximum temperature increases from 300-310℃ to 340-350℃ or so.
3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
4.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
5.Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).

Product Features

  • From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
  • From the original 40W power to 50W, therefore, the maximum temperature increases from 300-310℃ to 340-350℃ or so.
  • The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
  • Support the customization of different specifications, length, resistance of the heater.
  • Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).

Visit The Website For More Information…

SIQUK Upgraded MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality CR-10, CR-10S, CR-10 S4, RepRap Prusa i3, 1.75mm (Bonus: 1 Meter PTFE Teflon Tube)


SIQUK Upgraded Replacement Aluminum Drive Feed MK8 Extruder 3D Printer Extruders Kit

Description
The MK8 extruder kit made of aluminum alloy material, more stable and durable than the original plastic one while working, a great replacement for the original extruder.

Specification
Color: Red
Main material: Aluminum alloy

Package Included
1x Creality 3D – Extruder Upgrade Kit
1 x 1M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD)

Note
There are many small parts in the package, for safety, please keep away from your child.
The actual color of this item may be slightly different from the pictures shown on website due to the light and brightness of the different screen, please understand.

Product Warranty

SIQUK are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.

If there are any questions, please feel free to contact us, SIQUK Direct Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • Easy to install – unbolt the old original plastic extruder and screw in the new metal extruder, then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame
  • Application – MK8 extruder drive feed kit, it can replace acrylic parts of CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus printer
  • Stable and durable – the MK8 extruder kit made of aluminum alloy material, more stable and durable than the original plastic one while working
  • Advantages – the metal extruder have stronger pressure to pushing the filament into printer nozzle, improve the printer’s performance.You can adjust the extruder gear pressure by the adjustable bolt on your demand
  • Warm note – there are many small parts in the package, for safety, please keep away from your child

Visit The Website For More Information…