12V/40W heater, the temperature can up to 280℃ (Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing 4mm OD and 2mm ID
PC4-01 Tube Fitting
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Filament Diameter: 1.75mm
Material: Stainless Steel
Type: Extruder Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm
Note: Compatible with all 1.75mm V6 Makerbot 3D printer.
1 x All Metal V6 J-Head Hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat
Before installation, it must be printed the support for the thrust fork that will be fixed on the machine body, and the support bracket of the extruder and the cooling fan of the extruded material. Note: if you only print PLA, you can also use it for the support, if you also print in ABS, then use the latter, because the heat of the plate tends to very soften the PLA with melt results.
If your printer is Anet A8, please note: the fan wire is short, so it must be lengthened. The 2-pin JST connector of the thermocouple is not suitable, you’ll have to replace it with a 3-pin JST or a patchwork with the original one (the polarity is doesn’t matter).
- V6 all-metal printer head, 100% brand new and high quality.
- 12V/40W heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280℃, 12V high speed fan, lose heat quickly.
- Compatible with all 1.75mm V6 Makerbot 3D printer.
- Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
- Package Include: All Metal V6 J-Head Hotend Full Kit + 10 Pcs Extruder Brass Nozzle Print Head + 5 Pcs Stainless Steel Nozzle Throat
Visit The Website For More Information…
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″
Mounting holes: 3.2mm diameter, for M3 screws
Max Current: 25A (Enhance heat dissipation), safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).
This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.
2 Set x Heated Bed Power Expansion Module Kit
TopDirect Customer Service Team is dedicated to offer our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.
All TopDirect products provide 30 days money-back guarantee & 12-month warranty. Any questions, please don’t hesitate to contact us. We will reply you within 24 hours.
- Application: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
- Motherboard: The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
- 25A MAX Current: This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
- Good Protection: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
- Package: 2 Set x Heated Bed Power Expansion Module Kit (motherboard is not included).
Detailed Information available on our Homepage…
The timing belts and pulleys are popular choices for Reprap, Prusa, MendelMax,3D Printer At least six teeth in contact with the pulley at a given time. This will reduce the possibility of sliding. GT2 pulley and belt are used together, and the profile with rounded teeth, which ensures that the belt tooth smoothly and accurately into the pulley groove Anti-backlash timing belt pulley with 20 teeth is one of the best choices for 3d printer construction.
1. Durable and practical.
2. GT2 Timing Belt is specially designed for linear motion.
3. GT2 Pulley and GT2 Timing Belt are used together, very convenient to use.
4. Round tooth profile ensures that the belt tooth fits smoothly.
5. 20 teeth contact with the tape minimizes the likelihood of the belt slippage.
6. For the best performance, which should allow at least 6 teeth in contact with the pulley at a given time. This minimizes the possibility of belt slippage and helps to further reduce play.
GT2 Timing Belt:
Pitch : 2mm
Diameter: 16 mm
Diameter of the Hole: 5mm
1 x 5m GT2 timing belt
8 x 20T timing pulley
1 x Hexagon wrench
- ♦ Length: 5m, Width: 6mm, Material: Rubber.
- ♦ 20 teeth contact with the band that minimizes the likelihood of belt slippage.
- ♦ GT2 timing belt and pulley compatible (GT2 pulley) are popular choices for RepRaps and Traps.
- ♦ This GT2 timing belt is specially designed for linear motion. GT2 Timing Belts utilize a rounded tooth profile that guarantees that the belt tooth fits seamlessly and accurately in the disc groove.
- ♦ For the best performance, which should allow at least 6 teeth in contact with the pulley at a given time. This minimizes the possibility of belt slippage and helps to further reduce play.
Visit The Website For More Information…