PChero 5pcs E3D V6 Aluminum Extruder Hotend Nozzle Throat Heater Block with 10pcs 2mm Thick Heat-Insulated Cotton, for Makerbot 3D Printer

The key parts of the 3D printer – Heated aluminum block insulation, the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.

Specification:
Compatibility:for E3D V6 Makerbot 3D Printer
Heater block Dimension: 20*15*11 mm, net weight: 8g/pc
Material: Aluminum
Inner hole for set screw: M6 and M3
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Heat insulation cotton Dimension: 72*21*2 mm

Package Included:
5 x Aluminum Heater Block
10 x 3D printer heating block cottons

Note:
1. The heat insulation cotton Does Not have the pre-punched holes, it’s easy to bore a hole.

Product Features

  • Package Included: 5 x Aluminum Heater Block + 10 x 2mm thick Heat Insulation Cotton.
  • HEATER BLOCK – Made of durable Aluminum, Measures 20*15*11mm, Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Heating Block Cotton – High temperature-resistant cotton can work for a long time at 900 degrees, 2mm thick heating block cotton For 3D printer hotend nozzle heat insulation.
  • Compatibility – Heating Aluminum Block for E3D V6 Makerbot 3D Printer structure, works with extruder nozzle throat & heat-insulated cotton.
  • Heater Mounting Hole: 6mm diameter, Thermocouple Mounting Holes:3mm diameter.

Visit The Website For More Information…

Wisamic PEI Sheet for 3D Printing with 3M 468MP Adhesive Tape, Multiple Sizes Available (12″x12″,0.8mm thick)

Specification
Material: Polyetherimide
Dimensions: 8 “x8″/10″x10″/12″x12”
Thickness: 0.8 mm/2 mm
Density: 1.35 g / cm3

Instruction
There are two methods for linking the PEI sheet to the printing bed. The first method is just fix the sheet to the printing bed using binder clips. Secondly, use the 3M 468MP transfer tape to attach the PEI sheet to the printing bed.
When the PEI sheet is attached, you need to re-establish the printing bed. After completing these steps, everything is ready!

Package Contents
1x PEI Sheet
1x 3M 468MP Transfer Tape

Note
To clean the surface with isopropyl alcohol, methyl alcohol or soap, the PEI will remain clean and will be useful to achieve the best adhesive effect. Gently shaking with the grain 2000 paper can also extend the shelf life of the PEI sheet.

Product Features

  • Compatibility: ABS and PLA both Stick rafts extremely well to the surface, which saves the trouble of using the support for best adherence.
  • Durability: It can be reused for multiple prints. You just need wipe the PEI sheet with isopropyl alcohol between prints gently to achieve the satisfying results.
  • Easy to Use: PEI (Polyetherimide) sheet provides a 3D printing build surface that requires no tape, slurry, or adhesive.
  • Scratch-resistent Package: Blue protective film guards against scratches during shipping.

Detailed Information available on our Homepage…

PChero 5pcs Aluminum Extruder Hotend Nozzle Throat Heater Block with 10pcs 2mm Thick Heat-Insulated Cotton, for MK7 MK8 Makerbot 3D Printer

The key parts of the 3D printer – Heated aluminum block insulation, the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.

Specification:

Heater block Dimension: 20*20*10 mm, net weight: 7g/pc
Material: Aluminum
Inner hole for set screw: M6 and M3
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Heat insulation cotton Dimension: 72*21*2 mm

Package Included:

5 x Aluminum Heater Block
10 x 3D printer heating block cottons

Note:

1. The heat insulation cotton Does Not have the pre-punched holes, it’s easy to bore a hole.

Product Features

  • Package Included: 5 x Aluminum Heater Block + 10 x 2mm thick Heat Insulation Cotton.
  • HEATER BLOCK – Made of durable Aluminum, Measures 20*20*10mm, Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Heating Block Cotton – High temperature-resistant cotton can work for a long time at 900 degrees, 2mm thick heating block cotton For 3D printer hotend nozzle heat insulation.
  • Compatibility – Heating Aluminum Block for MK7 MK8 Makerbot 3D Printer structure, works with extruder nozzle throat & heat-insulated cotton.
  • Heater Mounting Hole: 6mm diameter, Thermocouple Mounting Holes:3mm diameter.

Visit The Website For More Information…

Gaoxing Tech. 10 Pcs 3mm Thick Heating Block Cotton Nozzle Heat Insulation For 3D Printer

Description:

The key parts of the 3D printer – Heated aluminum block insulation, the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.
High temperature: long-term work at a high temperature of 900 ┬░

Package included:

10 x 3MM Fast Heating Insulation Cotton Cotton Insulation Coating 70 X 20MM For 3D Printer

Product Features

  • The key parts of the 3D printer – Heated aluminum block insulation,
  • the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.
  • High temperature: long-term work at a high temperature of 900 ┬░

Visit The Website For More Information…