Item Name: Remote Feed Extruder
Quantity: 1 Set
Features: Durable, Easy to Use, 3D Printer Accessories
Size: 4cm x 4cm/1.57″ x 1.57″ (Approx.)
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
1 x Remote Feed Extruder (Motor Not Included)
- Very useful and durable remote feed extruder.
- Suitable for Anet A8, Prusa I3, Tevo Tarantula 3D printers, etc.
- Features: Durable, easy to use, 3D printer accessories
- Size: 4 cm x 4 cm / 1.57 inches x 1.57 inches (about)
- This kit does not contain a motor. You need to install the extruder on the motor.
Click Here If You Need More Detailed Info…
Have you ever been annoyed by abruptly interruption while your 3D printer is running (Tangled filament, Nozzle jam, Power outage), causing the 3D print to fail?
Do you feel depressed when your 3D printer stops at where the print is almost finished, you have to spend whole day to print it again?
The Best Solution Is Here – Eryone Resumer 3D!
What we can do for you
1- Resuming directly from interrupted prints.
2- Resuming interrupted prints from any printed layer.
3- Print Multi-color object with Resumer 3D by single extruder.
4- Printing with inserts, Resumer 3D will change the way of 3D designing.
Length: 69.4mm, Width: 29.5mm, Height: 17mm
Resuming Height ≤ 2m
Good to know
When you test Resumer 3D with power outrage module, turn on the printer after turning off it for at least 10 seconds, otherwise the printer may not detect the SD card, as a result, Resumer 3D could not resume the prints.
Please do not touch printings and X-axis, Y-axis, Z-axis (Except for moving the extruder.), when you resume the printer, in case of failure printing due to the movement of printings.
- ✅【Powerful and Innovative】- Eryone Resumer 3D can resume your interrupted prints from any printed layer instead of resuming only from where the nozzle stops like other solutions. With our Resumer 3D, you can adjust the Z axis height to the perfect height, the printer will resume to print like it didn’t stop ever.
- ✅【High Quality & Reasonable Price】- No need to spend hundred dollars to buy a Rasberry Pi and Power monitoring module, do not have to buy the extra Mainboard either. With Eryone Resumer 3D, you can save hundreds of filaments.
- ✅【Plug & Play Operation︱Easy to Use】- No Need Drivers! Simply plug the Eryone Resumer 3D into your 3D printer via USB cable, No headache of editing G-code, no afraid of technical problems when you choose Rasperry Pi.
- ✅【Wide Compatibility】- Eryone Resumer 3D is compatible with most of marlin firmware based 3D printer. We have integrated all the USB drivers for 3D printer that we can find in the market to MCU (Miro Controller Unit).
- ✅【100% Money Back Guarantee】- Eryone guarantees your purchase and provides for a lifetime money-back guarantee if you ever have a problem with the Resumer 3D or find that it’s not living up to its promise.
Visit The Website For More Information…
TEVO 3D Printer parts 3D Volcano kit J-head Hotend for 1.75mm Direct Filament Wade Extruder 0.4mm Nozzle for 3D printer part
Product name: Volcano Hotend
Thermistor: 100K NTC 3950
- Type:Volcano kit
- Usble: 3D Printer
Visit The Website For More Information…
– Layer resolution: 50 microns.
– MAX Printing Speed: 150 mm/s.
– Build size: 300X 300 X 400mm.
– Full Metal E3D Bowden long distance Extruder with Titan.
– Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments.
– Material specifications 1.75mm in diameter.
– Positioning accuracy: Z 0.004mm, XY 0.012mm.
– Printing Color: Single color.
– Nozzle diameter: 0.4mm (customized 0.3mm/0.2mm).
– Recommended extruder temperature: 210°C (the maximum can be set to 260°C).
– Heating plate temperature: 60-110°C (proper winter warming and summer appropriate cooling).
– Best ambient temperature: ≥25°C.
– Power requirements: 220V, 250W, 50Hz, 0.89A.
– Connection: TF card or USB.
– The file print format: STL,G-Code.
– Compatibility: Windows, Linux, Mac.
– CE, FCC specifications: CE, FC, ROHS.
– Device weight: 14kg.
– Equipment size: 560X 600X620mm.
– Package size: 660X 560X 310m.
Please Note:The package only with 1piece PC sticker,the color is red or green,color ship randomly.The item do not ship to Switzerland.
- Ship from German Warehouse.Note:The PC has two colors:Green/Red.Color Ship randomly.
- Large Printing Bed – Printing Size 300X300 X 400mm,DIY self-assembly.
- Max Print Speed – The max print speed is 150mm/s.High Transverse speed.
- High Accuracy Printing – Bowden style Titan Extruder with improved hotend design.
- Easy Assembling – No Printed Parts.95% Assembled, easy for installation.
Click Here For More Information