3D Printer Kit with Mega 2560 Board + RAMPS 1.4 Controller + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for 3D Printer

Features:
Brilliant 3D Printer Accessories Set meets most needs.
Including RAMPS 1.4 Board, LCD12864, Arduino-Compatible Mega 2560 R3, A4988 StepStick Stepper Motor Module, and other accessories.

12864 LCD Controller:
This Full Graphic Smart Controller Contains a SD-Card Reader, an Rotary Encoder and a 128 x 64 Dot Matrix LCD Display.
You can easy Connect it to your Ramps Board using the “Smart Adapter” included.
After Connecting this Panel to your Ramps you don’t need your pc any more, the Smart Controller Supplies Power for your SD card.
Further more all Actions like Calibration, Axes Movements can be Done by just using the Rotary Encoder on the Smart Controller.
Print your 3D Designs without PC, just with a G-Code Design Stored on the SD Card.

RAMPS 1.4:
Fully Assembled & Tested, No Soldering Required.
The Modular Design includes Plug in Stepper Drivers and Extruder Control Electronics on an Arduino MEGA Shield
For Easy Service, Part Replacement, Upgrade-Ability and Expansion.

Mega 2560 R3 Board:
Microcontroller: ATMEGA2560-16AU
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz

A4988 Stepper Motor Driver Package Includes: 1 x 3D Printer Controller RAMPS 1.4 Board
1 x LCD12864 Intelligent controller
1 x Arduino-Compatible Mega 2560 R3
5 x A4988 StepStick Stepper Motor Driver Module with Heatsink
1 x Adapter
2 x FC flat cable
1 x USB Cable

Product Features

  • Brilliant 3D Printer Accessories Set meets most needs. Including RAMPS 1.4 Board, LCD12864, Arduino-Compatible Mega 2560 R3, A4988 StepStick Stepper Motor Module, and other accessories.
  • This full graphic Smart LCD12864 Intelligent controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display.
  • RAMPS (RepRap Arduino-compatible MEGA Pololu Shield) is designed to fit the entire electronics needed for a RepRap in one small controller for a lower cost and a smaller size.
  • Arduino-Compatible Mega 2560 R3 is fully compatible with the original Arduino MEGA 2560 R3, able to use all the Arduino open source platform to create or learn interactive objects.
  • A4988 StepStick Module is a complete microstepping motor driver with built-in translator for easy operation.

Click Here If You Need More Detailed Info…

WINSINN 3D Printer Controller Kit For Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.6 Upgraded Mosfet + 5Pcs DRV8825 Stepper Motor Driver + LCD 12864 for Arduino Reprap


Ramps 1.6 board:

-Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be up to 200W, or smaller than 200W.

DRV8825 Driver:

-Suitable for driving below 8.2V ~ 45V 2.5A stepper motor
-Six different stepping resolutions: full, half, 1/4,1/8,1/16,1/32
-Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate
-Automatic current decay mode detection / selection
-Thermal shutdown circuit, undervoltage lockout, crossover current protection
-Ground short-circuit protection and load short-circuit protection

Mega 2560 R3:

-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limits):6-20V
-Digital I/O Pins:54 (of which 14 provide PWM output)
-Analog Input Pins:16
-DC Current per I/O Pin:40 mA
-DC Current for 3.3V Pin:50 mA
-Flash Memory:256 KB of which 4 KB used by bootloader
-SRAM:8 KB
-EEPROM:4 KB

—————————————————————————————————————

Package include:
►1 x RAMPS 1.6 Board
►1 x Mega 2560 R3 Board
►1 x 12864 LCD Display Controller
►1 x LCD Smart Adapter
►5 x DRV8825 Stepper

———————————————————————————————————————

►Note:
►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • ✔️DRV8825 driver board widely used in 3D printers and small CNC machines. It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance. It suitable for driving below 8.2V ~ 45V 2.5A stepper motor, And had Six different stepping resolutions: full, half, 1/4 ,1/8, 1/16, 1/32.
  • ✔️12864 LCD: The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using “smart adapter” included. This panel connect your RAMPS 1.6, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller.
  • ✔️This kit includes a complete set of the most common and useful components that can be used by all tech-savvy people out there to build their own printer controller. A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • ✔️Product Warranty: WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty. If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
  • ✔️Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be samller than 200W.

Click Here If You Need More Detailed Info…

Professional 3D Printer CNC Kit for Arduino GRBL CNC Shield + UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 Stepper Motor Driver + Nema 17 Stepper Motor

This is a professional sensor kit for UNO R3. New and upgraded, we provides various components or sensor module, with which you will find it easy for you to complete every experiments or learning. All these are packaged in a portable case, easy to carry and storage.

CNC Shield Board:
Latest CNC Shield Version 3.0 for Arduino
GRBL 0.9 compatible
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis
Coolant enable
Compatible with A4988 or DRV8825 stepper driver
Working Voltage: 12-36V DC
Max. Working Current: 2.5A

RAMPS 1.4 Mechanical Switch Endstop:
Red: VCC (ramps +)
Black: GND (ramps -)
Green: SIGNAL (ramps s)

DRV8825 Stepper Motor Driver:
Size: 1.5mm x 2mm
Upgraded from A4988
Maximum Current: 2.5A
32 Subdivision: 1, 1/2, 1/4, 1/8, 1/16, 1/32
4-layer PCB board for better heat dissipation
Suitable for driving stepper motors up to 8.2V~45V, 2.5A

Nema 17 Stepper Motor:
Model: 17HD48002H-22B
Rated Current/phase: 1.7A
Step Angle: 1.8 deg.
Holding Torque: 59Ncm(84 oz.in)
Frame Size: 41 x 41mm
Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm

Package Lists:
1 x CNC Shield V3
1 x UNO R3 MEGA328P CH340G with USB Cable
5 x DRV8825 Stepper Motor Driver with Heat Sink
5 x RAMPS 1.4 Mechanical Switch Endstop
5 x 3pin Cable (70cm)
3 x Nema 17 Stepper Motor
3 x Nema 17 Mounting Bracket

Product Features

  • ➤ Latest CH340G CNC Shield expansion board Version 3.0 for Arduino, and compatible for GRBL 0.9.
  • ➤ UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB cable.
  • ➤ 5pcs RAMPS 1.4 Mechanical Switch Endstop for 3D printer RAMPS 1.4 with 3pin 70cm cable.
  • ➤ 5pcs DRV8825 Stepper Motor Driver with heat sink, upgraded from A4988, max. current: 2.5A, 32 subdivision: 1, 1/2, 1/4, 1/8, 1/16, 1/32.
  • ➤ 3pcs Nema 17 Stepper Motor 59 Ncm (84 oz.in) 47mm Body 1.8 degree with mounting bracket kit.

Click Here If You Need More Detailed Info…

TopDirect 500mm T8 Stainless Steel Lead Screw Set with Flexible Shaft Couplings 8mm + 8mm Copper Nut + Support Pillow Block + 1.7A 0.4Nm/56.2oz.in Nema17 Stepper Motor for 3D Printer Parts

Features:
– T8 Lead Screw:
Material: Stainless steel
Diameter: 8mm
Pitch: 2mm
Length: 500mm

– Nut:
Material: Brass
Diameter: 8mm
Pitch: 2mm

– Ball Support:
Material: Zinc alloy
Bore diameter: 8mm

– Shaft Coupling:
Material: Aluminium
Shaft: 5 x 8mm
Length: 25mm
Diameter: 20mm

– Stepper Motor:
Type: Bipolar
Holding Torque: 40N.cm
Detent Torque: 2.2N.cm
Step Angle: 1.8 ± 5% (full step, not load)
Wire Length: 40cm

Installation:
1. Put screw nut into the lead screw;
2.Then install the 2 ball bearing separately at both ends of the lead screw;
3. According to the size of you need to adjust the distance between the nut and ball bearing;
4. Put shaft coupling into the lead screw beside the ball bearing.

Package Lists:
1 x 500mm T8 Lead Screw
1 x Brass Screw
2 x Ball Support
1 x Shaft Coupling
1 x Stepper Motor

Product Features

  • Made of premium material for durable and long-lasting use. It’s easy to use and install with long service life. The precise design will ensure its practicability in the work of highly performance.
  • Suitable for most industrial auto equipment, stepper motor rail, such as 3D printers, engraving machine, XYZ module, slider, lifts etc.
  • Lead Screw: 500mm length, 8mm diameter; Brass Nut: 8mm diameter, 2mm pitch.
  • Mounted Ball Bearing: 8mm diameter; Shaft Coupling: 5 x 8mm shaft, 25mm length, 20mm diameter.
  • Package: 1 * lead screw; 1 * brass nut; 2 * ball supports; 1 * shaft coupling; 1 * stepper motor.

Visit The Website For More Information…