Rubber timing belt,3D Printer Accessories 2GT Timing Belt 10mm Rubber Synchronous Belt (White 10m) 10mm Timing Belt 3D Printer Belt White Open Synchronous Belt with Steel Core 10M

Features:

Made of high quality rubber material, it is very flexible, durable, practical and wear resistant. This product can be used in 10mm wide timing timing belts for 3D printers. Low elongation, low noise, high wear resistance and good crack resistance. High-quality craftsmanship and high quality are excellent accessories for 3D printers. Multi-purpose, also used in conveyors, mining equipment, automobiles, food machinery, dishwashers, etc.

Specifications:

Condition: 100% Brand New
Material: rubber
Color: White
Width: approx. 10mm / 0.4in
Length: approx. 10m / 32.8ft

Package list:

1 * Timing Belt

Product Features

  • Made of high quality rubber material, it is very flexible, durable, practical and wear resistant
  • This product can be used in 10mm wide timing timing belts for 3D printers
  • Low elongation, low noise, high wear resistance and good crack resistance
  • High-quality craftsmanship and high quality are excellent accessories for 3D printers
  • Multi-purpose, also used in conveyors, mining equipment, automobiles, food machinery, dishwashers, etc

Detailed Information available on our Homepage…

TopDirect 500mm T8 Stainless Steel Lead Screw Set with Flexible Shaft Couplings 8mm + 8mm Copper Nut + Support Pillow Block + 1.7A 0.4Nm/56.2oz.in Nema17 Stepper Motor for 3D Printer Parts

Features:
– T8 Lead Screw:
Material: Stainless steel
Diameter: 8mm
Pitch: 2mm
Length: 500mm

– Nut:
Material: Brass
Diameter: 8mm
Pitch: 2mm

– Ball Support:
Material: Zinc alloy
Bore diameter: 8mm

– Shaft Coupling:
Material: Aluminium
Shaft: 5 x 8mm
Length: 25mm
Diameter: 20mm

– Stepper Motor:
Type: Bipolar
Holding Torque: 40N.cm
Detent Torque: 2.2N.cm
Step Angle: 1.8 ± 5% (full step, not load)
Wire Length: 40cm

Installation:
1. Put screw nut into the lead screw;
2.Then install the 2 ball bearing separately at both ends of the lead screw;
3. According to the size of you need to adjust the distance between the nut and ball bearing;
4. Put shaft coupling into the lead screw beside the ball bearing.

Package Lists:
1 x 500mm T8 Lead Screw
1 x Brass Screw
2 x Ball Support
1 x Shaft Coupling
1 x Stepper Motor

Product Features

  • Made of premium material for durable and long-lasting use. It’s easy to use and install with long service life. The precise design will ensure its practicability in the work of highly performance.
  • Suitable for most industrial auto equipment, stepper motor rail, such as 3D printers, engraving machine, XYZ module, slider, lifts etc.
  • Lead Screw: 500mm length, 8mm diameter; Brass Nut: 8mm diameter, 2mm pitch.
  • Mounted Ball Bearing: 8mm diameter; Shaft Coupling: 5 x 8mm shaft, 25mm length, 20mm diameter.
  • Package: 1 * lead screw; 1 * brass nut; 2 * ball supports; 1 * shaft coupling; 1 * stepper motor.

Visit The Website For More Information…

3D Printer Parts MK3 Spring Steel Sheet Heat Bed Platform, FYSETC MK52 Printing Buildplate with Hole for Reprap Prusa i3 MK3 MK2.5

1. FYSETC, the abbreviation of FuYuanSheng Electronics, an electronic technology company provide 3D printers solutions, open source hardware solutions and OEM service for Makers and engineers. Our products include 3D printers, aircrafts, IOT, and robots.

2. We offer many kinds of Printer Parts. Include Popular Printer CR-10, Ender 3, Prusa i3, Makerbot, Anet A8, Duplicator i3, Tevo Tarantula, Maker Select V2 etc.

3. There are many experienced electronic engineers, software engineers and mechanical engineers in our team to provide Affordable and reliable products and services.

Package Includes:

1X Steel Sheet
1X PEI Sheet (Gift)

Product Features

  • It is a must 3D Printer part for DIY or replace a new Prusa i3 MK3 printer hot bed, only fit for new magnetic MK52 heatbed, not include MK52 heat bed, not for other Prusa i3 serial.
  • Size: 254X241X3mm/ 10″X9.4″X0.1″. Gift: one piece PEI, PEI size: 254X254 mm( you can use scissors to cut any size).
  • Material: Steel, positive and negative have been completed drilling.
  • Thickness is 3mm, keep the flatness across whole area, more balanced thermal conductivity.
  • After Sales Guarantee: each one defective item can have the free replacement or refund, if you meet any issues, please feel free to email or Q&A us, we will try our best to assist you.

Visit The Website For More Information…

KINGPRINT 3D Printer Nozzle Cleaning Kit-0.4mm with Tweezers Tool Kit Stainless Steel Bendable Bit Cleaning Needle 4.13’’Length (12 PCS)

Specification:
Material:Stainless Steel Cleaning Needles&Tweezers and Plastic Box
Total Length:4.13”needles&7.95″
Main Features:
Cleaning Function
Easy to Use
Safety Material
Unique Design
Widely Used
Package Included:
1×Tweezers
12×0.4mm Nozzle Cleaning Kit
. 1×Box
Tips:
The 0.4mm Nozzle Cleaning Kit is very sharp, pay attention to Stab.

Product Features

  • Cleaning Function: 12PCS 0.4mm Nozzle Cleaning needle can easily dredge and clean the clogged nozzle, ideal for gentle maintenance of your nozzle and difficult to reach the place
  • Easy to Use: 1.Open your 3D printer, heating nozzle, melting the filament; 2, Use 0.4mm cleaning needle dredge nozzle, please attention your hand avoid too close to the heating nozzle; 3, Use tweezers to remove the cleaning consumables
  • Safety Material: Antistatic, non-magnetic and sharp precision tweezers and stainless steel curved 0.4mm Nozzle Cleaning needles
  • Unique Design: Nozzle cleaning needle toughness good, not easy to break, needle fine good use, all items in a neat plastic pipe and screw cover to ensure that they are safely together
  • Widely Used: Clear the needle can be high precision removal and cleaning of the plug nozzle, tweezers can be widely used to maintain the radiator part

Click Here If You Need More Detailed Info…