SIQUK 13 Pieces 3D Printer Nozzles Stainless Steel Print Head 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm Extruder Nozzle for E3D Makerbot


SIQUK 13 Pieces 3D Printer Nozzles Stainless Steel Print Head 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm Extruder Nozzle for E3D Makerbot

Features
Material: stainless steel
Color: silver
Input diameter: 1.75mm
Output diameter: 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm
Compatible with all 1.75mm PLA ABS printer.
Installation: external M6 thread connection.

Warm note: small accessories, please keep away from children.

Package included
2x 0.2mm Nozzle Print Head
5x 0.4mm Nozzle Print Head
2x 0.6mm Nozzle Print Head
2x 0.8mm Nozzle Print Head
2x 1.0mm Nozzle Print Head

Product Warranty

SIQUK are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.

If there are any questions, please feel free to contact us, SIQUK Direct Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • Multiple sizes: 13 pieces E3D nozzles in 5 different sizes, the output diameter are 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm
  • Premium material: the 3D printer nozzle made of premium stainless steel, sturdy and durable, abrasion resistant
  • Compatibility: the input diameter is 1.75mm, compatible with all 1.75mm PLA ABS printer
  • 4 Installation: external M6 thread connection
  • Warm note: small accessories, please keep away from children

Detailed Information available on our Homepage…

LABOTA 5 Pieces 0.3 mm Drill Bits for 3D Printer Nozzle Cleaning Kit Stainless Steel Nozzle Cleaning Tool Kit (Silver)

Features:
It is made of stainless steel with good flexibility, not rust or break easily.
The drill bits will clean your printer nozzles very well and make it print better.
Compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.

Enough quantity:
5 Pieces of nozzle drills applicable in your daily life, and they are stored in a box, in case of missing.

Specifications:
Material: stainless steel
Bit diameter: 0.3 mm
The bit length: 5 cm
Total length:, 8 cm
Box length: approx 10 cm; box diameter: approx 12mm

Package included:
5 x Needle drill bits
1 x Plastict box

Notes:
the drill is small and sharp, please keep it in the box after use and keep it away from children to avoid injuries and losses.

Product Features

  • Material: Stainless Steel; not easy to rust or break
  • Compatibility: Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.).
  • Quantity: 5pcs
  • Bit Diameter: 0.3mm; The length of drill: 5cm; The total length: 8cm
  • Function: it can be applied to accurately measure the diameter of nozzle holes, you can use it to clean the small size nozzles and other small parts by this tool kit, such as the feed gear

Click Here If You Need More Detailed Info…

E3D V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers

V6 has the following advantages over V5:
1, to reduce the heat sink length, thickness and diameter (shorter length is conducive to the stability of increasing the heat end), while increasing the number of fins, the heat end reduce weight at the same time, has better heat dissipation performance and stability.
2, external rotation gas heavy joint for a built-in pipe clamp, further reduce weight and reduce the hot end length, also make the feeding tube more deeply into the hot end, feeding more powerful (pneumatic connector can only be inserted a small tube into the feeding, easy to cause the feed is not smooth and other issues).
3, improving the original heating block, appearance is more concise and practical, heating tube, a thermistor and aluminum block contact more fully, and thus more precise temperature control outstanding.

Specification of Extruder Tube: 
Type : Nozzle Throat 
Outer Thread : M6 M7 
Nozzle Throat Outer Diameter:6mm 
Nozzle Throat Inner Diameter:4mm 
Teflon Pipe Inner Diameter : 2mm 
Length : 22.5mm 
Filament Diameter : 1.75mm 
Material : Stainless Steel 
Specification of Brass Nozzle: 
Type : Extruder Brass Nozzle Print Head 
Color: Golden 
Material: brass 
Input Diameter: 1.75mm 
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 
Note:  Compatibility:Compatible with all 1.75mm V6 Makerbot 3D printer  
Attention: Small parts, keep away from children 
package including: 
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder 
1 x 0.2mm Nozzle Print Head 
1 x 0.3mm Nozzle Print Head 
2 x 0.4mm Nozzle Print Head 
1 x 0.5mm Nozzle Print Head 
5 x 1.75mm Stainless Steel Nozzles Throat 
1 x L-shaped wrench

Product Features

  • Reduce the heat sink length, thickness and diameter (shorter length is conducive to the stability of increasing the heat end), better heat dissipation performance and stability.
  • External rotation gas heavy joint for a built-in pipe clamp, make the feeding tube more deeply into the hot end, feeding more powerful (pneumatic connector can only be inserted a small tube into the feeding, easy to cause the feed is not smooth and other issues).
  • Improving the original heating block, appearance is more concise and practical, heating tube, a thermistor and aluminum block contact more fully, and thus more precise temperature control outstanding.
  • This 3D Printer J-head Hotend is applied for 1.75mm/0.4mm Filament Long-Distance Filament Bowden extruder
  • To improve the original heating block, appearance is more simple and practical, heating pipe, thermistor and fuller contact with aluminum block, whereby more precise temperature control prominent.

Click Here If You Need More Detailed Info…

VBESTLIFE 5PCS 3D Printer M6 Stainless Steel Extruder Nozzle Print Head for 1.75mm Filament(0.4mm)

Features:
1. High quality with bright luster, suitable for 3D Printer.
2. Smooth chamfer can reduce drag and avoid blocking the nozzle.
3. Made of stainless steel, rustproof and durable for long term use.
4. Good sealing performance to prevent ink leakage.
5. Carefully crafted to ensure the concentricity and roundness of the hole.

Specifications:
Material: Stainless Steel
Nozzle Tip Diameter: 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm (Optional)
Suitable: For 1.75mm Filament 3D Printer
Installing Mode: External Thread Connection
Thread: M6
Working Temperature: 280℃
Working Pressure: 280Pa
Weight: Approx. 3g

Package Include:
5 x Stainless Steel Nozzle

Product Features

  • High quality with bright luster, suitable for 3D Printer
  • Smooth chamfer can reduce drag and avoid blocking the nozzle
  • Made of stainless steel, rustproof and durable for long term use
  • Good sealing performance to prevent ink leakage
  • Carefully crafted to ensure the concentricity and roundness of the hole

Click Here For More Information