SODIAL 5pcs 220x220mm Plastic 3D Printer Accessories Hot Bed Stickers For Wanhao i3 3D Printer Parts & Accessories

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 5pcs 220x220mm Plastic 3D Printer Accessories Hot Bed Stickers For Wanhao i3 3D Printer Parts & Accessories
100% brand new and high quality.
Single sheet design installs more quickly and with fewer bubbles than tape or films
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.
Instant bonding with convenient use.
Background is made of adhesive, easily stick on the heat bed platform.
Material: Plastic
Color: Black + White
Size: 220x220mm
Shape: Rectangle
Package include:
5 x print stickers
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • easy and convenient
  • Matte surface, nice
  • Surface scrub treatment, can be reused, paste the hot bed first, and then paste, can be attached to PLA, ABS, HIPS, PETG, TPE supplies, nylon, PC, RETT materials

Visit The Website For More Information…

SODIAL A4988 Driver CNC Shield Expansion Board For Arduino V3 Part Engraver Integrated Circuits Electronica Accessory 3D Printers Parts

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) A4988 Driver CNC Shield Expansion Board For Arduino V3 Part Engraver Integrated Circuits Electronica Accessory 3D Printers Parts
UNO for Arduino module IO port correspondence introduction.
UNO for Arduino———————- expansion board
8 ———————— EN ( stepper motor driver enable , active low )
7 ———————– Z.DIR (Z -axis direction control )
6 ———————– Y.DIR (Y -axis direction control )
5 ———————– X.DIR (X -axis direction control )
4 ———————- Z.STEP (Z -axis stepper control )
3 ———————- Y.STEP (Y -axis stepper control )
2 ———————- X.STEP (X -axis stepper control )
/ / The following is a simple stepper motor control procedures,
# define EN 8 / / stepper motor enable , active low
# define X_DIR 5 / / X -axis stepper motor direction control
# define Y_DIR 6 / / y -axis stepper motor direction control
# define Z_DIR 7 / / z axis stepper motor direction control
# define X_STP 2 / / x -axis stepper control
# define Y_STP 3 / / y -axis stepper control
# define Z_STP 4 / / z -axis stepper control
Function : step . function: to control the direction of the stepper motor , the number of steps .
Item Type:Motherboard
colour:Picture color
Material:PC
Package Contents:
1 x CNC Shield Expansion Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • Uses removable A4988 or DRV8825 compatible stepper drivers. The extension board can be used for carving machine, 3D printer driver expansion board. GRBL 0.8 compatible. (Open source firmware that runs on an for arduino UNO that turns G-code commands into stepper signals)
  • PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
  • Parameters : dir direction control , dirPin corresponding stepper motor DIR pin , stepperPin corresponding stepper motor ” step ” pin , Step number of step of no return value.
  • void step (boolean dir, byte dirPin, byte stepperPin, int steps); digitalWrite (dirPin, dir); delay (50); for (int i = 0; i Less Than steps; i + +); digitalWrite (stepperPin, HIGH); delayMicroseconds (800); digitalWrite (stepperPin, LOW); delayMicroseconds (800);

Visit The Website For More Information…

SODIAL 1PC 220x220x3mm Cork Sheets Heated Bed Hot Plate with Adhesive Tape Printing Build Sheets Build Plate Tape 3D Printer Parts

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 1PC 220x220x3mm Cork Sheets Heated Bed Hot Plate with Adhesive Tape Printing Build Sheets Build Plate Tape 3D Printer Parts
Color: Wood color
Material: cork
Size: 220*220
Thickness: 3mm(about 2.8 mm in fact)
Package included:
1 x Cork Sheets Heated Bed Hot Plate
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • With high temperature tape for attaching to heated bed
  • decrease bed heat up time
  • The heat insulation cork plate is used for 3D printer nozzle keeping warm, the heating insulation cotton is made from heat-resistant ceramic fiber, the product sizes can be customized according to customer needs, the Benefits for keeping the key parts of the 3D printer – heating aluminum block warm, is making the internal temperature flat, saving power,and energy.

Visit The Website For More Information…

SODIAL CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality CR-10, CR-10S, CR-10 S4, CR-10 S5, RepRap Prusa i3, 1.75mm

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality CR-10, CR-10S, CR-10 S4, CR-10 S5, RepRap Prusa i3, 1.75mm
This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We’ve reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament.
Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments.
Easy and convenient to use.
With high quality and durable performance.
100% brand new and in good condition.
colour: red
Material: Aluminum
Package Contents:
1x Creality 3D – Extruder Upgrade Kit
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • UPGRADE: Original Aluminum Drive Feed for Creality 3D Printers CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • STABLE and DURABLE: DIY kit and you need to assemble by yourself. Our kits include all the necessary screws & parts needed to directly replace your old original weak extruder.
  • EASY TO INSTALL: All you do is unbolt the old original Creality extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • ADVANTAGES: The advantages of a metal extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.

Visit The Website For More Information…