Thank you to order from Luxnwatts for Creality 3D Printer Part
Luxnwatts Store Supply High Quality With Good After Service for All Customers Who Ask and Orders Our Products
Luxnwatts MK8 Extruder Hot End Kit 0.4mm Nozzle for Creality CR-10 10S S4 S5 3D Printer
1.Material: Aluminum & Stainless Steel & Brass
2.Installation type: external thread connection
3.Scope of application: 3D printer
4.Nozzle size: 0.4mm
5.Throat pipe length: 30mm
6.Aluminum block size: 20 mm x 20 mm x 10 mm
7.Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
8.Thermistor and heater cable length: 1M
1pc x Aluminum Block
1pc x Heating Tube (heating tube 1m long, 12V 40W)
1pc x Brass Nozzle (0.4mm)
1pc x M6*30mm Throat Pipe (built-in Teflon)
1pc x Thermistor+Brass Sleeve
2PCS Cooling Fans
- MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W
- Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
- 100% brand new and high quality fit for Creality CR-10 Series 3d printer
- Can work with different size MK8 nozzle such as 0.2mm 0.3mm 0.4mm 0.5mm
Click Here If You Need More Detailed Info…
YOTINO 16Pcs J-Head V6 Hotend Sets/5Pcs All-Metal Hotend Kit+5 Pcs Extruder Brass Print Head+5 Pcs Stainless Steel Nozzle Throat Pipes+Mini hexagonal wrench
High Temperature Resistance:
With PTFE in hot regions of our Hotend we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C(This temperature just be kept for a short time, otherwise the machine will burn out).
This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
All Metal V6 J-Head Hotend Sets:
12V/40W heater(the temperature can up to 280℃, Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing (4mm OD and 2mm ID)
PC4-01 Tube Fitting
Nozzle Throat Extruder Tube:
Outer Thread Type: M6 M7
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel
Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.2mm/0.3mm/0.4mm/0.5mm
1 x All Metal V6 J-Head Hotend Sets
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat
1 x mini L-shaped hexagonal wrench
- 【High temperature resistance】Thicker thermistor NTC and high-quality heating rods, up to 280℃, 12V high-speed fan, rapid cooling to prevent NTC burnout, disconnection, heating rod aging fast etc
- 【Simple installation】NTC with terminal connector, using without install, mini nickel-plated L-shaped hexagonal wrench, can be used in the synchronous wheel, coupling, heating block v5, v6 and other accessories
- 【Anti leakage-material】Nozzle and tube connect seamless, prevent material leaking and blocking. Brass nozzle with a size slot, high hardness, good thermal conductivity, silking uniform, increase the melting rate and printing speed, smooth contact surface, to prevent leakage
- 【Anti-blockage】High-quality 303 stainless steel throat pipes, high temperature, to prevent heat uploading, to avoid feed expansion in advance to solve the plug problem
- 【Compatibility】Hotend is suitable for ABS, PLA and other traditional printed materials. Perfect applied for 1.75mm / 0.4mm Filament E3D Long-Distance Filament Bowden extruder
Visit The Website For More Information…
3D Chinese Landscape Cross Stitch Kit DIY Embroidery Kit Sets
3D chinese landscape, looks more vivid and stereo, magnificent and beautiful visual perception, get close contact with nature.
Material: silk thread
Pattern: Chinese landscape
Number of Grids: 450×169 (WxH)
Cross Stitch CT number: 11CT (Use 3 strands embroidery, 2 strands Crochet)
1X Embroidered Cloth
1X HD Colorful Graph
15X Bundle of Silk Threads
The cross stitch is not ready-made. You need to finish it by yourself.
- 3D chinese landscape cross stitch.
- Not need to draw grids.Adopt accurate printing cotton cloth.
- Natural ecologic cotton, good quality of the embroidery.
- Soft and bright color cotton threads, no fading, not easy to become fuzzing or broken.
- The metallic needles are durable and easy for you to thread. Less time for finishing the beautiful picture, easier than the ordinary embroidery.
Check Out Our Website For Details…
SAVFY® 3D PLA Straight Filaments Sets for 3D Printer Pen 30cm (10 colors)
Material:1) Synthetic leather
1.Plug the adapter.
2.Press the wire feed button, then the pin will start preheating. If the indicator is red in green, it means the temperature reaches the melting point.
3.Put ABS filament in the import hole, hold the Feed button, the thread will be sent into the hole of the inner motor.
If to allow the thread from the nozzle to draw what you want.
4.Press the speed swtich, you can freely change the output speed of the filament.
5.Hold the wire eject button may automatically withdraw the thread.
10packs x 3D Printing Pen PLA Straight Filaments(Black+Red+Blue+White+Gold+Silver+Green+Yellow+Purple+Pink)
- 3D PLA Straight Filaments Sets for 3D Printer Pen
- (There may be some transportation problems during the Christmas time.We are so sorry for some of our customers for waiting longer time than usual,and we sincerely hope you can understand us!Now everything goes well!Hope all of you enjoy your shopping time!)
Detailed Information available on our Homepage…