TRIGORILLA ANYCUBIC 3D Printer Rapid Resin 405nm for Photon UV Curing LCD DLP Printing 1L, Clear Green

It is widely used in many fields such as industrial parts, garage kits, craftwork design, education, archaeological model, clock and eyeglasses, etc. Please confirm that the UV wavelength of your 3D printer is 405nm.

Specification: Size: ~500g/500ml, 1000g/1000ml
Color: Black,White,Grey,Yellow,Green,clear, etc
Main material: resin monomer , photoinitiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Resin parameters: Solidify wavelength: 405nm
Hardness (D): 79.0
Viscosity (25C): 552.0 mpa.s
Liquid density: 1.100 g / cm³
Solid density: 1.184 g / cm³
Flexural strength: 23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequency: 14.2 %

Precautions:

1. Storage 1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment.

2.Usage: 1) Shake well before use. Avoid any direct sunlight during usage.
2) Do not put in the mouth. Keep it away from the children.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) For accident contact, please wash by plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.
6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues.

Safety Information: 1)Keep out of the reach of children and animals
2)Always wear gloves and eye protections before use to avoid direct contact with skin and keep room ventilated.
3)Do not be used for products intended for internal use or in contact with food or drink items.

Product Features

  • 【Quick Curving,Low Shrinkage and High Precision】: TRIGORILLA ANYCUIBIC UV resins can be rapid prototyping. It ensures the high precision of the print model with smooth finish. model with smooth finish.
  • 【Professional for LCD】: Special designed for LED light source to achieve better printing quality. Suitable for most DLP/LCD or SLA 3D printers
  • 【Excellent Fluidity】: With excellent fluidity, the resin can quickly infiltrate models and cure them into shapes, increase printing success rate, make it easier to clean printers and models.
  • 【Appropriate Toughness】: TRIGORILLA ANYCUBIC UV resins have good combination of hardness and toughness, which brings easy removal of the model and printing details.
  • 【Great Stability, Bright and Stunning Colors】 : After cured, it shows good stability in moist and corrosive environment. With high quality pigments and photo-initiators, the models printed with resin have a very pure and stunning color effect.

Check Out Our Website For Details…

UV LED Resin Curing Light Lamp for SLA DLP 3D Printer Photosensitive (UK)

110-260V 405nm UV LED Resin Curing Light Lamp for SLA DLP 3D Printer Photosensitive Accessories

Feature:

1. This UV LED light with 6pcs high power 405nm UV LED, can fast curing the 405nm UV resin printed objects, make the objects solid efficiently and use less time than usualy ways.

2. Within 5cm to the light, the resin can be cure within 10-15 seconds, but thicker parts need more time.

3. This light can be apply to DIY curing enclosue or use in handheld way. Due to strong UV light output, please ware eye protection device when use this light.

Specifications:

Luminous wavelength: 405nm

Frequency: 150-60H2

Light output: 6W power and 60W UV influence

Power input: 110-260V

Weight: 0.6kg

Size: 115x85x90mm/4.52×3.34×3.54”

Theoretical life: 10000H

Purpose: UV curing, resin curing (SLA DLP printing curing).

Standard plug: UK

Note:

Please allow 1-3mm differs due to manual measurement.

Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Package included:

1 x UV Resin LED Curing Light

Product Features

  • This UV LED light with 6pcs high power 405nm UV LED, can fast curing the 405nm UV resin printed objects, make the objects solid efficiently and use less time than usualy ways.
  • Within 5cm to the light, the resin can be cure within 10-15 seconds, but thicker parts need more time.
  • This light can be apply to DIY curing enclosue or use in handheld way. Due to strong UV light output, please ware eye protection device when use this light.
  • Frequency: 150-60H2
  • Light output: 6W power and 60W UV influence

Click Here For More Information

Fafalloagrron UV Resin Curing Light 405nm Solidify Photosensitive LED Lamp 60W Output Accessories for SLA DLP 3D Printer US EU


Description:
Tips:
Due to the strong output of UV light, please utensils protective device for the eyes when using this light.

Specification:
Luminous Wavelength: 405nm
Input Voltage: 110-260V
Frequency: 150- 60H2
Standard Plug: US, EU
Color: Gray
Dimension: 115x85x90mm/ 4.53×3.35×3.54in
Quantity: 1 Pc

Note:
1.No retail package.
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x UV Light

Product Features

  • The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.
  • The resin can cure in 10-15 seconds from a distance of 5 cm from the light, but thicker parts require more time.
  • The lamp can be used in DIY curing packages or handheld applications.
  • Due to the strong ultraviolet light output, please use eye protection when using this light.
  • Package includes:1 Piece UV Resin Curing Light,1 Piece UK Power Adapter

Click Here For More Information

TECHNOLOGY OUTLET PREMIUM 3D PRINTER RESIN (GREY 250ML)

Premium 3D printer Resin Due to the Success of our Premium 3D printer filament we have now introduced our Premium 3D printer Resin Technologyoutlet UV Resin is suitable for DLP, SLA and LCD 3D printers. wanhao, aycubic,morpheus, creality etc… Available in 1Ltr and 250ml bottles It is very low odour, high precision, comes in multiple colours including castable for jewellery and dental,It has a high hardness and LCD each layer 4-8s dependent upon printer. Light source: LED UV 405nm Viscosity: 100-150 (25℃,m.pa.s) Density: 1.05-1.13g/cm³ Hardness(Shore D): 85-88D Tensile strength: 42.0 Mpa Flexural Strength: 60 Mpa Ekibgatuib at break: 10% Notched impact strength: 45J/m

Product Features

  • available in 1 ltr and 250ml bottles
  • low odour
  • High Hardness
  • Easy to print

Visit The Website For More Information…