4pcs TL-Smoother Plus Addon Module with 4pcs Heatsink 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Terminator Reprap MK8 I3

Description:
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.

Parameter:
Heatsink Size: 26mm * 20mm * 6mm / 1.02inch * 0.78inch * 0.24inch
Heatsink material: Aluminum
TL smoother Size: 48mm * 25.3mm * 7.6mm(1.89inch * 1inch * 0.29inch)
Weight: 0.02kg(0.04lb.)

Features:
1. 8 big Package(SMC)diodes provides better heat dissipation performance that can handle bigger motor than small diodes.
2. Lower vibration lower noise smoother result.
3. All the boards adopt a patch diode with a strong consistency, the signal is more stable and the service life is longer.
4. How to use: Connect this TL-Smoother Module to the motherboard’s corresponding drive socket and motor.

TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs

Package Including
4 * 3D Printer TL-Smoother
4 * HeatSink
4 * Du-Pont Lines

Product Features

  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • Product Description: On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • Heatsink size: 26 * 20 * 6mm, material: Aluminum. TL smoother size: 48mm * 25.3mm * 7.6mm.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.

Detailed Information available on our Homepage…

Jolicobo TL Smoother Plus Addon Module 3D Printer Accessories Filter for Pattern Elimination Motor Clipping Filter

This TL-smoother module mainly used for 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.

 

The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor and also provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.

 

All the boards adopt the patch diode with strong TOSHIBA consistency, the signal is more stable and the service life is longer.

 

The TL-Smoother addon module is especially for DVR8825 and A4988/2 and a stepper motor driver with lower resistance.It can also be used for I3 and UM models 3d printer.Please note that the effect of amplitude reduction is different for different models.

 

Connect the filter to the corresponding drive socket of the main board and the motor. Pay attention to the line sequence. We standardize the 4 pin plug. Please directly pull out the wire and solder it to the back of the filter board or directly change the plug.

Product Features

  • This TL-smoother module mainly used for 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor and also provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
  • All the boards adopt the patch diode with strong TOSHIBA consistency, the signal is more stable and the service life is longer.
  • The TL-Smoother addon module is especially for DVR8825 and A4988/2 and a stepper motor driver with lower resistance.It can also be used for I3 and UM models 3d printer.Please note that the effect of amplitude reduction is different for different models.
  • Connect the filter to the corresponding drive socket of the main board and the motor. Pay attention to the line sequence. We standardize the 4 pin plug. Please directly pull out the wire and solder it to the back of the filter board or directly change the plug.

Detailed Information available on our Homepage…

FYSETC 3D Printer Upgrade Parts, V2 TL-Smoother Plus Addon Module Motor Driver Terminator Mainboard Accessories for Anet A8 Ender 3 Ender 3 Pro Ender 5 Anycubic Delta Tevo Tornado CR20 MK8 I3, 3 Pack

FYSETC is a professional supplier of 3D Printers related accessories products. Include Popular Printer CR-10, Ender 3, Prusa i3, Makerbot, Anet A8, Duplicator i3, Tevo Tarantula, Maker Select V2 etc. It has a professional R&D team and high quality after-sales service to ensure that you can purchase at a reliable price.

After-sales guarantee: each defective item can be replacement for free or refund. We are focusing on perfect qulity, If any question or have more vlaued suggestions, please feel free to contact or Q&A us, we will try our best to service you.

Package Includes:
4 x V2 TL Smoother module
4 x Cable( 4 pins, length is about 11cm/ 4.3 inch)

Product Features

  • A Must have upgrade parts. The item suitable for printer of most popular models on the market, but don’t work for Creality CR-10( the connector is not suitable),
  • You only need them if you have the older Ender 3. If you have the new Ender 3, with the flexible bed you don’t need smoothers, as the mainboards were upgraded.
  • The board provides flyback diodes( freewheeling diodes)for the motor outputs,so that they are also protected against induction voltages in the unpowered state of the driver.
  • This Smoother can effectively eliminate the mechanical vibration generated by the 3D printer motor, lower noise, special for parallel arm structure of the machine effect is significant, on the delta-style printer under DVR8825 drivers or A4988/2 drivers, You will got smoother movement.
  • Size (LxW): 43.8×28.7 mm/ 1.72×1.13 inch, 4 pins. 8 big Package(SMC)diodes provides better heat dissipation performance that can handle bigger motor than small diodes.

Visit The Website For More Information…

Creality Ender-3X 3D Printer plus free glass bed and 5 extra nozzles by technologyoutlet

Creality Ender-3X plus free glass bed and 5 extra nozzles by Technology Outlet No reviews £219.00 (inc. VAT) £182.50 (ex. VAT) Quantity Add to cart Get it Tuesday, 18th SeptemberOrder within23Hrs15Mins Share this: Share on Facebook Tweet on Twitter Share on Google+ Pin on Pinterest Features: High-precision 3D printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure, saving space but building the world. MK-10 extruder greatly reduces plugging risk and bad extrustion; and the hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing. CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with high-precision printing quality. Adopts V-slot linear bearing system and wheel moving parts, super noiseless and smooth printing performance; big hand twist nut make the print platform easier to level. Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on. Compatible with various 1.75mm printing filaments like PLA, ABS, TPU, etc; wide applications, can be used for product structure design, toy modeling, architectural design, parts manufacturing, etc. Make the platform flat and the model easy to take. Specifications: Plug: US/ EU/ UK/ AU(Optional) Input: AC 100-265V 50-60Hz Output: DC 24V 15A 360W Modeling Technology: FDM(Fused Deposition Modeling) Printing Size: 220 * 220 * 250mm Printing Accuracy:±0.1mm Max. Traveling Speed: 180mm/s Filament: 1.75mm PLA, ABS, TPU, etc. Layer Thickness: 0.1-0.4mm Nozzle Diameter: 0.4mm File Format: STL, OBJ, G-Code Working Mode: Online or SD offline Max. Nozzle Temperature: 255℃ Max. Hotbed Temperature: 110℃ Machine Size: 44 * 41 * 46.5cm / 17.3 * 16.1 * 18.3in Package Size: 59.5*49.5*16.5cm/23.4*19.4*6.5inch Package Weight: 9596g/338.4oz Package List: 1 * 3D Printer Set

Click Here For More Information