Professional 3D Printer CNC Kit for Arduino GRBL CNC Shield + UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 Stepper Motor Driver + Nema 17 Stepper Motor

This is a professional sensor kit for UNO R3. New and upgraded, we provides various components or sensor module, with which you will find it easy for you to complete every experiments or learning. All these are packaged in a portable case, easy to carry and storage.

CNC Shield Board:
Latest CNC Shield Version 3.0 for Arduino
GRBL 0.9 compatible
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis
Coolant enable
Compatible with A4988 or DRV8825 stepper driver
Working Voltage: 12-36V DC
Max. Working Current: 2.5A

RAMPS 1.4 Mechanical Switch Endstop:
Red: VCC (ramps +)
Black: GND (ramps -)
Green: SIGNAL (ramps s)

DRV8825 Stepper Motor Driver:
Size: 1.5mm x 2mm
Upgraded from A4988
Maximum Current: 2.5A
32 Subdivision: 1, 1/2, 1/4, 1/8, 1/16, 1/32
4-layer PCB board for better heat dissipation
Suitable for driving stepper motors up to 8.2V~45V, 2.5A

Nema 17 Stepper Motor:
Model: 17HD48002H-22B
Rated Current/phase: 1.7A
Step Angle: 1.8 deg.
Holding Torque: 59Ncm(84 oz.in)
Frame Size: 41 x 41mm
Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm

Package Lists:
1 x CNC Shield V3
1 x UNO R3 MEGA328P CH340G with USB Cable
5 x DRV8825 Stepper Motor Driver with Heat Sink
5 x RAMPS 1.4 Mechanical Switch Endstop
5 x 3pin Cable (70cm)
3 x Nema 17 Stepper Motor
3 x Nema 17 Mounting Bracket

Product Features

  • ➤ Latest CH340G CNC Shield expansion board Version 3.0 for Arduino, and compatible for GRBL 0.9.
  • ➤ UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB cable.
  • ➤ 5pcs RAMPS 1.4 Mechanical Switch Endstop for 3D printer RAMPS 1.4 with 3pin 70cm cable.
  • ➤ 5pcs DRV8825 Stepper Motor Driver with heat sink, upgraded from A4988, max. current: 2.5A, 32 subdivision: 1, 1/2, 1/4, 1/8, 1/16, 1/32.
  • ➤ 3pcs Nema 17 Stepper Motor 59 Ncm (84 oz.in) 47mm Body 1.8 degree with mounting bracket kit.

Click Here If You Need More Detailed Info…

Longruner Professional 3D Printer CNC Kit for Arduino GRBL CNC Shield + UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver + Nema 17 Stepper Motor (LKB02)

Welcome to Longruner Store, you can consult us if you encounter any problems during use!

CNC Shield Board:
Latest CNC Shield Version 3.0 for arduino
GRBL 0.9 compatible
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis
Coolant enable
Compatible with A4988 or DRV8825 stepper driver
Runs on 12-36V DC

DRV8825 Stepper Motor Driver:
Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It’s not arduino official board but it’s compatible with all arduino software and hardware)

Nema 17 Stepper motor Specification:
Model No.:17HD48002H-22B
Step Angle: 1.8 deg.
Holding Torque: 59Ncm(84 oz.in)

Product Features

  • Longruner UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable. You can also download the same tutorials online in the following link: https://mega.nz/#F!iI9WjThL!VHRNzC44Cxlx7CjIQQJqBQ
  • Latest CH340G CNC Shield expansion board Version 3.0 for Arduino.
  • 3pcs NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with Mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12pcs M3 Screws.
  • 3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable.

Click Here If You Need More Detailed Info…

Professional 3D Printer CNC Kit for Arduino, Kuman UNO R3 with Mechanical Switch, DRV8825 Stepper Motor Driver, Aluminum Cooler + NEMA 17 Stepper Motor

Description:

This is a professional sensor kit for UNO R3. New and upgraded, we provides various components or sensor module, with which you will find it easy for you to complete every experiments or learning. All these are packaged in a portable case, easy to carry and storage.

Specifications:

Compatible Version:CH340G Shield 3.0

Compatible Stepper Motor Drive:A4988/ DRV8825

Working Voltage:12-36V DC
Max. Working Current:2.5A

For Nema 17 Stepper Motor

Model:17HD48002H-22B

Torque:59Ncm (84 oz.in)

Rated Current:1.7A

Frame Size:41 x 41mm

Length:47mm

Axle Diameter:5mm

Axle Length:22mm

Package Size:Approx. 180 x 100 x 110mm / 7.1 x 3.9 x 4.3in

Package Weight Approx. 1615g

 

Package List:

1 x CNC Shield Board

1 x For Kuman UNO R3

4 x DRV8825 Stepper Motor Drive

4 x Aluminum Cooler

3 x For Nema 17 Stepper Motor

3 x Mounting Base for Nema 17 Stepper Motor

12 x M3 Screws

3 x Mechanical Switch

3 x 3pin Cable (70cm)

1 x USB Cable for R3 Board (1.5m)

Product Features

  • These components can be used in a wide range of application, simple and the service life is long.
  • Multiple types of modules or components in this set, which will meet your different needs of learning or experiment.
  • High quality stepper motor drive, running within 2.5A current (Maximum), and compatible with for Arduino software and hardware. (NOT official version of motor drive.)
  • CNC shield board is suitable for CH340G Shield 3.0 version for Arduino, and compatible for GRBL 0.9.
  • Professional module board for Kuman UNO R3, fit well for Arduino, easy to install.

Click Here If You Need More Detailed Info…

Richer-R 3D Printer CNC Module Kit, ASHATA CNC Shield Board Stepper Motor Driver with Aluminum Cooler+ Nema 17 Stepper Motor

Description:
This is a professional sensor kit for UNO R3. New and upgraded, we provide various components or sensor module, with which you will find it easy to complete your experiments or learning. All these are packaged in a portable box, easy to carry and storage.

Connection Instruction:
Red Wire – VCC (Slope +)
Black Wire – GND (Slope -)
Green Wire – SIGNAL (Slope in S)
Warm tips: Generally, the system must have at least three machines.

Specifications:
CNC Shield Board
Compatible Version
CH340G Shield 3.0
Compatible Stepper Motor Drive A4988 / DRV8825
Working Voltage 12-36V DC
DRV8825 Stepper Motor Drive (NOT official version)
Max. Working Current 2.5A
For Nema 17 Stepper Motor
Model 17HD48002H-22B
Step Angle 1.8 Degrees
Torque 59Ncm (84 oz.in)
Rated Current 1.7A
Frame Size 41 x 41mm
Length 47mm
Axle Diameter 5mm
Axle Length 22mm
Package Size Approx. 180 x 100 x 110mm / 7.1 x 3.9 x 4.3in
Weight Approx Package. 1615g

Package List:
1 x CNC Shield Board
1 x For Kuman UNO R3
4 x DRV8825 Stepper Motor Drive
4 x Aluminum Cooler
3 x For Nema 17 Stepper Motor
3 x Mounting Base for Nema 17 Stepper Motor
12 x M3 Screws
3 x Mechanical Switch
3 x 3pin Cable (70cm)
1 x USB Cable for R3 Board (1.5m)

Product Features

  • These components can be used in a wide range of application, simple and the service life is long.
  • Multiple types of modules or components in this set, which will meet your different needs of learning or experiment.
  • High quality stepper motor drive, running within 2.5A current (Maximum), and compatible with for Arduino software and hardware. (NOT official version of motor drive.)
  • CNC shield board is suitable for CH340G Shield 3.0 version for Arduino, and compatible for GRBL 0.9.
  • Professional module board for Kuman UNO R3, fit well for Arduino, easy to install.

Click Here If You Need More Detailed Info…