KINGPRINT TL-Smoother Addon Module Filter Module 3D Printer Motor Driver(Pack of 3pcs)

Application: 3D Printer
Size : 40*30mm Package Included:
3 * TL-Smoother

Product Features

  • Lower vibration lower noise smoother result.
  • The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers and A4988/2 drivers.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers.
  • Type: Voltage Regulator

Detailed Information available on our Homepage…

TopDirect 2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer

Color: Black
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″
Mounting holes: 3.2mm diameter, for M3 screws
Max Current: 25A (Enhance heat dissipation), safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.

Package Included:
2 Set x Heated Bed Power Expansion Module Kit

Product Warranty:
TopDirect Customer Service Team is dedicated to offer our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.

All TopDirect products provide 30 days money-back guarantee & 12-month warranty. Any questions, please don’t hesitate to contact us. We will reply you within 24 hours.

Product Features

  • Application: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • Motherboard: The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
  • 25A MAX Current: This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
  • Good Protection: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • Package: 2 Set x Heated Bed Power Expansion Module Kit (motherboard is not included).

Detailed Information available on our Homepage…

Geeetech 3D WiFi Module for 3D Printer, Easy to Use, Wireless Control 3D Printer with Easyprint 3D App

Geeetech developed 3D WiFi Module, with the aim of enabling all the 3D printing hobbyists to control their printer wirelessly. 3D WiFi Module is mainly composed of two parts: control board and Wi-Fi module. Thumb-size as it is, it is powerful enough to connect your 3D printer with Geeetech’s cloud server, making it a reality for you to control your device on EasyPrint 3D App.

Which are compatible 3d printers?
·All the Geeetech 3d printers ✓
·Creality CR-10✓
·Anycubic I3 Mega✓
·Ante A8✓
·Mono price Select✓
·And so on

CPU:STM32F107 +ESP8266
power supply: 5V DC
Working current: 150mA(on average),500mA(peak)
USB 2.0 full-speed host
TF card support: SDSC,SDHC(<32G);CLASS2,CLASS4

Frequency: 2.4G~2.5G (2400M~2483.5M)
Transmission power:
802.11b: + 20 dBm
802.11g: +17 dBm
802.11n: +14 dBm
Receiving sensitivity:
802.11b: -91 dBm (11 Mbps)
802.11g: -75 dBm (54 Mbps)
802.11n: -72 dBm (MCS7)
Antenna: PCB on-board antenna
Wi-Fi mode: Station/SoftAP
WLAN standard: 802.11 b/g/n/
Security mechanism: WPA/WPA2
Encryption Type: WEP/TKIP/AES
Network protocol: IPv4、TCP/UDP/HTTP/FTP/MQTT
Size: 49.37*25.87*16.5mm
Packaging size: 52.44*28.94*17mm

Product Features

  • 1.Tumb-size but Powerful:
    Integrated with control board and Wi-Fi module. These two parts could seamlessly connect your 3D printer with our cloud server and control the device freely via EasyPrint 3D App.
  • 2.Easy-to-Use:
    Just need to connect 3D printer to the USB port and complete simple configurations on EasyPrint 3D App, then control the device wireless.
  • 3.Fast & Stable:
    Adopting high-performance chips and professionally coded by our devoted engineers, it could send commands and files from the cloud server to your 3D printer in a fast and stable fashion.
  • 4. Remote Control:
    EasyPrint 3D App makes it a reality for you to remote control 3d printer in real time. You can set the relevant printing parameters and receive instant notifications during printing.
  • 5.High Compatibility:
    Compatible with most 3D printers. The compatible conditions are that the USB to serial chip of your printer belongs to one of these three ones (CH340, FT232 and PL2303), and the 3d printer is controlled by G.code instructions.

Visit The Website For More Information…

TMC2208 Stepper Motor Driver Module with Heat Sink for 3D Printer Part

Model: TMC2208
Interface: Step/Dir
Configuration: CFG Pins or UART
Native Microsteps: Up to 1/256
MicroPlyer Microsteps: 1/256
Logic Voltage VIO: 3-5V
Motor Voltage VM: 5.5-36V
Motor Phase Current: 1.2A RMS, 2.0A Peak
VM always needed: Yes
Internal V-Regulator: Enabled
RDSon: <=0.3 Ohm
StealthChop(quiet): Yes
SpreadCycle: Yes
CoolStep: No
StallGuard: No
DcStep: No

Package Includes:
1 × TMC2208 Driver
1 × Heat Sink
1 × Screwdriver

1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Product Features

  • Flexible microPlyer interpolation unit, the component can provide up to 256 microstep / step resolution, even in the pulse rate is limited system can still be perfect to achieve sinusoidal control
  • As stealthChop fine music technology is widely used in 3D printing, so these components are also designed to be compatible with existing 3D printer electronics, eliminating the need for costly redesign
  • Components have pulse/direction input, can be completely independent operation
  • The configuration is implemented via digital input
  • Can replace the original TMC2100 ,lower heat, especially for the 3D printing market

Visit The Website For More Information…