TopDirect V6 J-Head Hotend Metal Hot End Hotend Extruder Full Kit with 10 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for V6 Makerbot RepRap 3D Printers

12V/40W heater, the temperature can up to 280℃ (Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing 4mm OD and 2mm ID
PC4-01 Tube Fitting

Extruder Tube:
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 22.5mm
Filament Diameter: 1.75mm
Material: Stainless Steel

Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm

Note: Compatible with all 1.75mm V6 Makerbot 3D printer.

Package Contents:
1 x All Metal V6 J-Head Hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat

Important Tips:
Before installation, it must be printed the support for the thrust fork that will be fixed on the machine body, and the support bracket of the extruder and the cooling fan of the extruded material. Note: if you only print PLA, you can also use it for the support, if you also print in ABS, then use the latter, because the heat of the plate tends to very soften the PLA with melt results.
If your printer is Anet A8, please note: the fan wire is short, so it must be lengthened. The 2-pin JST connector of the thermocouple is not suitable, you’ll have to replace it with a 3-pin JST or a patchwork with the original one (the polarity is doesn’t matter).

Product Features

  • V6 all-metal printer head, 100% brand new and high quality.
  • 12V/40W heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280℃, 12V high speed fan, lose heat quickly.
  • Compatible with all 1.75mm V6 Makerbot 3D printer.
  • Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • Package Include: All Metal V6 J-Head Hotend Full Kit + 10 Pcs Extruder Brass Nozzle Print Head + 5 Pcs Stainless Steel Nozzle Throat

Visit The Website For More Information…

SHiZAK 10pcs 4cm 3D Printer PTFE Tube For Extruder Hotend 1.75mm pla For CTC Makerbot

Specifications :
Item type: 3D Printer Tube
Color: White
Item Diameter:10mm, Length:4cm
Item Weight: 10g
Item Quantity:1set =10pcs

Package list :
1 set 4cm 3D Printer Tube (10pcs tubes are included!)

Product Features

  • Works great as a guide tube for CTC 3D Creator.
  • Fit for 3D Printer CTC Makerbot.
  • Withstands temperatures up to 260C
  • Density: 2.15-2.20g/cm3

Visit The Website For More Information…

YaeKoo All-Metal V6 J-Head Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot RepRap 3D Printers(10)

Compatibility:

Compatible with all 1.75mm E3D V6 Makerbot 3D printer

Product description

All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers

Specification of All Metal V6 Hotend Full kit:

12V/40W heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:

Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:

Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer
Attention: Small parts, keep away from children

Package including:

1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat
1 x M4 Hex driver.

Product Features

  • 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
  • Easy to install: NTC connector with terminal, you can install directly
  • Compatibility: Compatible with all 1.75mm E3D V6 Makerbot 3D printer
  • All Metal V6 Hotend 12v/40w/1.75mm/0.4mm Extruder Full Kit(V6 print head + fan + fan cover + PTFE tube + tube fitting, 5 pcs Extruder Brass Nozzle Print Head(1×0.2mm/1×0.3mm/2×0.4mm/1×0.5mm) , 5 Pcs Stainless Steel Nozzle Throat and M4 Hex driver

Detailed Information available on our Homepage…

Ceramic Heater Cartridge 40W 12V 3D Printer Reprap Prusa i3 ultimaker makerbot anet A8 creality Cr10

Product Features

  • Compatible with most hot ends for RepRap, Prusa Mendel, Rostock, Delta, and other 3D printers including E3Dv6.
  • Tested and qualified in the UK, our purpose made high power ceramic heater cartridge gives a much-improved performance over fragile and poor tolerance enamel resistors. Hotends heat quickly and hit the highest of temperatures
  • Quick release connectors provide easy & quick access to the hot end for maintenance and avoids the necessity of rewiring back to the control board. Crimped terminals to the control board give improved connectivity and reliability.
  • Manufactured from high quality materials. Stainless steel body Length: 19mm, Diameter: 6mm, Lead made from silicone insulated high temperature wire overall length: 1000m

Visit The Website For More Information…