MagiDeal 15mx50mm Masking Tape Paper Painters Printing For Reprap 3D Printer -1 Roll

Description:

– Fit for 3D printer PLA accessories

– Suitable to high temperature, can up to high temperature 300 degree

– Medium temperature can between 100 to 260 degree.

– Widespread use in shoes, indoor decoration, electric machine, car, the furniture made of iron or plastic, with good sticky power,the surface is soft and will not leave residue.

– High temperature resistance, strong viscosity,difficult to pull off

Specification:

– Color: beige yellow

– Size:Width 50mm/1.9inchx length 15m/49ft, each layer thickness 0.16mm

– Feature:Heat-Resistant

– Model:50mmX15m

Package Includes:

1PiecexMasking Paper

Product Features

  • Fit for 3D printer PLA accessories
  • Suitable to high temperature, can up to high temperature 300 degree
  • Medium temperature can between 100 to 260 degree.
  • Widespread use in shoes, indoor decoration, electric machine, car, the furniture made of iron or plastic, with good sticky power,the surface is soft and will not leave residue.
  • High temperature resistance, strong viscosity,difficult to pull off

Click Here For More Information

MagiDeal GT2-6mm Rubber Timing Belt for 3D Printer 110/112/158/200/280/400/852/mm – 852mm

Description:

Length 110mm, 112mm, 158mm, 200mm, 280mm, 400mm, 852mmwidth 6mm in closed-loop

The PowerGrip GT2 system is an extension of the HTD system with greater load-carrying capacity

HTD drive clearance, using small diameter pulleys, is approximately four times greater than an equivalent GT2 timing belt driver

As smaller diameter pulleys are used, the clearance required to operate properly is increased

Circular arc tooth profile, tooth space is small, suitable for straight line driving, GT2 Closed -Loop timing belt Specs & Drawing

Specification:

Material: Rubber

Color: Black

Size: Approx. Pitch: 2mm/0.79inch, Bandwidth: 6mm/0.24inch
Length: Approx. 110mm/4.33inch, 112mm/4.41inch, 158mm/6.22inch, 200mm/7.87inch, 280mm/11.02inch, 400mm/15.75inch, 852mm/33.54inch

Package Includes:

1 piece Synchronous Timing Belt

Note:

Pls allow an error of 1-3mm due to the difference of manual measurement.

Product Features

  • Length 110mm, 112mm, 158mm, 200mm, 280mm, 400mm, 852mmwidth 6mm in closed-loop
  • The PowerGrip GT2 system is an extension of the HTD system with greater load-carrying capacity
  • HTD drive clearance, using small diameter pulleys, is approximately four times greater than an equivalent GT2 timing belt driver
  • As smaller diameter pulleys are used, the clearance required to operate properly is increased
  • Circular arc tooth profile, tooth space is small, suitable for straight line driving, GT2 Closed -Loop timing belt Specs & Drawing

Click Here For More Information

MagiDeal 3D Printer Parts 3.5Inch Color Touch Screen for Controller Board 32-bit

Description:

– Color touch screen: 3.5 inch TFT
– Resolution: 480 * 320
– Supports high-speed hardware SPI serial communication
– 3.5-inch high-resolution color touch screen controller 32-bit

Package Includes:

1x 3.5” Touch Screen
1x Cable

Product Features

  • Color touch screen: 3.5 inch TFT
  • Resolution: 480 * 320
  • Supports high-speed hardware SPI serial communication
  • 3.5-inch high-resolution color touch screen controller 32-bit

Visit The Website For More Information…

MagiDeal 3D Printer Motherboard Automatic Accessories Leveling Sensor Module Film DIY Easy Installation for E3DV6 Nozzles

Description:

– Compatibility is strong, compatible with almost all 3D printer main control boards

– It can be applied to a variety of 3D printer;
– Simple to use and easy to maintain;
– Easy installation, it can be used for a variety of 3D printer upgrades without any replacement parts, no need to debug; the default trigger distance is 0.1mm;
– High precision, leveling repeatability can be positive and negative 0.05MM
– Anti-interference ability, from the platform material; ambient light; environmental temperature and humidity and so on
– Long service life of the average number of more than 500,000 times

Package Includes:

1x 3D Printer Leveling Sensor Module
1x 2pin Plug
1x 3pin Plug
1x 2pin Cable

Note:

Auto leveling adjustable module is prohibited to use when nozzle temperature is higher than 45 degrees.
AutoLeveling” can automatically detect the compensation value between theprint platform and the print nozzle according to the parameters that hasbeen set and use the software to achieve the leveling.

Product Features

  • Compatibility is strong, compatible with almost all 3D printer main control boards
  • It can be applied to a variety of 3D printer;
  • Simple to use and easy to maintain;
  • Easy installation, it can be used for a variety of 3D printer upgrades without any replacement parts, no need to debug; the default trigger distance is 0.1mm;
  • High precision, leveling repeatability can be positive and negative 0.05MM

Detailed Information available on our Homepage…