TopDirect 2 Pack Heat Bed Power Module Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer

Features:
Color: Black
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″
Mounting holes: 3.2mm diameter, for M3 screws
Max Current: 25A (Enhance heat dissipation), safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

Note:
This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.

Package Included:
2 Set x Heated Bed Power Expansion Module Kit

Product Warranty:
TopDirect Customer Service Team is dedicated to offer our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.

All TopDirect products provide 30 days money-back guarantee & 12-month warranty. Any questions, please don’t hesitate to contact us. We will reply you within 24 hours.

Product Features

  • Application: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • Motherboard: The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
  • 25A MAX Current: This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
  • Good Protection: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • Package: 2 Set x Heated Bed Power Expansion Module Kit (motherboard is not included).

Detailed Information available on our Homepage…

CALISTOUK Heat Bed Power Module MOS Tube Power Expansion Board High Current Load Module for 3D Printer

Specification:
Dimensions: 60x50mm.
Mounting holes: 3.2mm diameter, for M3 screws.
Distance between holes: 54x43mm
Voltage: 12V-24V
Maximum constant current: 25A

Package included:
1 x Heated Bed Power Module
1 x Connection cable for input signal

NO Retail Box. Packed Safely in Bubble Bag.

Product Features

  • A general heated bed power expansion module high power module for 3D printer.
  • The module is helpful for heat bed to solve the issue of overload power and current load.
  • With this headed bed expansion power module to board lead the maximum current up to 25A.The current must not exceed 25A while the process working.
  • Helps 3D printer equipped with the controller board (capable of max 15A) become more powerful.
  • It can be used in Chitu motherboard and other open 3D Printer motherboards.

Visit The Website For More Information…

PChero Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer

Specifications:

Item Dimension: 50*60mm/ 2.36*1.97 inch
Mounting holes: 3.5mm diameter
Color: black, cable length: 6 inch
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.

Package Included:

1 x Heat bed Power Module
1 x Connection cable for input signal

Note:

1. Please double-confirm the wire you connect is right when installing this MOSFET Board, if you have any issue please contact us firstly, thanks!
2. Please make sure the maximum current load does Not Exceed 25Amps, to ensure a steady & Safe work.

Product Features

  • General add-on heated bed power expansion module, compatible with Anet A8 and most 3d printers. Effective to resolve the hot bed power is too large and the load current problems.
  • EQUIPPED with 32 bit high-speed ARM chip, the heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this PChero heat bed module is recommended.
  • OFFER PROTECTION- With this add-on module to your controller board, you can lead the maximum current up to 25A. If you need anything greater or equal to 15A this module is a must!
  • NOTE: Under the premise of normal cooling, it works stably under I(Max)=25A, the current must NOT exceed 25A while in the work process.

Click Here For More Information

Quimat Heat Bed Power Module MOS Tube Power Expansion Board High Current Load Module for 3D Printer

If you intend to use heated bed with your 3D printer that uses a 12V power
supply, then this module is recommended, else it may cause
excessive current during times which may burn the connectors on the controller board.
If you need anything greater or equal to 15A this module is a must!
For example, if your total power usage is 240W and you have 12V power supply,
then it means at least 20A is needed (20X12=240W).
As ChiTu controller board is only capable of 15A this setting will not work.
To make it work, you need this extra power module.

Specifications:
Color: Black
Max Current: 25A(Enhance heat dissipation)
Size: 2.36 x 1.97 x 1.22″
Weight: 40g(approx.)

Package Includes:
1 x Heat Bed Expansion Power Module(motherboard is not included)

Note:
Under the premise of normal cooling, it work stable under I(Max)=25A,
the current must not exceed 25A while the process working.

Product Features

  • A general heated bed power expansion module high power module for 3D printer.
  • The module is helpful for heat bed to solve the issue of overload power and current load.
  • With this headed bed expansion power module to board lead the maximum current up to 25A.The current must not exceed 25A while the process working.
  • Helps 3D printer equipped with the controller board (capable of max 15A) become more powerful.
  • It can be used in both Chitu motherboard,and other open 3D Printer motherboards.

Detailed Information available on our Homepage…