HE3D Open source ciclop DIY laser 3d scanner kit for 3d printer, designer and engineer DIY basic 3D scanner kit, injection parts

Beautiful red DIY 3D scanner
This scanner belongs to desktop 3D scanners, which can not match with industrial standard scanners, and it is not suitable for scanning irregular and complex objects, only scan nearly cylindrical object, the effect will be more ideal, there are many factors affect scan result. like scanned objects, environment and light. there is a big relationship between them, so we recommend you scan in Constant Light Studio, scanning results will be better.

This Scanner is easy to scan:
1, object space volume is bigger than 5*5cm
2, object space volume is smaller than 20.3cm*20.3cm
3. object weight is less than 3kgs
4. still object
5. opaque object

FAQ: which things are hard to scan or can not scan ?
1.object space volume is smaller than 5*5cm
2.transparent oject (glass or organic plastics)
3.luminous object or highly reflective objects
4.dark object and fuzzy object(such as plush toys )
5.object space volume is bigger than 20.3*20.3cm
6.object weight is more than 3kgs
7.moving object

Red injection molded plastics parts
The advantage of plastic injection molding.
1. The surface of injection molding plastic parts is more smooth and clean.
2. Compared with printed plastic parts, You do not need to fix it.
3. It is more durable than printed plastic parts.
Two big advantages of the new design.
1. it is more easy to install.
2. you can stable the board on this plastic parts.

Product Features

  • Product features
    Totally open source 3D scanner for 3D printing , free to get the software
    Easy to assemble and use
    Full kits, it include all the parts for the scanner
    Injection molding red plastics parts, not printed! that make the scanner more beatiful, you won’t encouter the problem caused by not precision size
    Upgrade to new intergrated motherboard

Click Here If You Need More Detailed Info…

3D DIY Laser Scanner Plate Kit w/Adapter Object Laser Desktop Scanner for Ciclop Printer

Features:
The surface of injection molding plastic parts is more smooth and clean
Easy to build.It requires manual set up, however this makes it possible to accurately calibrate the device for your intended use thus achieving optimum results for your particular task.
All information on the mechanical design, the electronics and the software have been made freely available to the community, to become part of the Technological Heritage of Humanity.
The kit includes all the necessary components and a step-by-step assembly guide, enabling you to set it up in less than an hour.
It uses 2 lasers projected over an object to capture the geometry and texture as it rotates on a turntable.

Description:
The 3D scanner is belongs to the desktop 3D scanner, and the scanner can not compare the industrial grade scanner,and is not suitable for complex irregular objects, only scanning objects close to the cylinder, the effect will be more ideal, with the quality of scanning objects and environment light and have a great relationship.

Specification:
Color:Red
Precision: 0.5 mm
Scanning time (configurable): 2-8 min
Steps per rotation: 1600 max
Scan volume: 203mm x 203 mm

Scanned object:
1.The object space volume greater than 5×5 cm (space diameter and height)
2.The object space volume is less than 20.3×20.3 cm
3.The object weight less than 3 kg
4.The object is stable
5.Opaque objects

Difficult to scan objects
1.The volume is less than 5×5 cm
2.Transparent objects (glass, plastic,etc.)
3.Luminous or strong reflective objects
4.Very dark targets and surface blurred objects (such as plush toys)

Do not scan objects
1.The volume is greater than 20.3×20.3 cm objects
2.Weight greater than 3 kg
3.Moving objects

Package included:
1 set of DIY 3D Scanner

Product Features

  • The surface of injection molding plastic parts is more smooth and clean
  • Easy to build.It requires manual set up, however this makes it possible to accurately calibrate the device for your intended use thus achieving optimum results for your particular task.
  • All information on the mechanical design, the electronics and the software have been made freely available to the community, to become part of the Technological Heritage of Humanity.
  • The kit includes all the necessary components and a step-by-step assembly guide, enabling you to set it up in less than an hour.
  • It uses 2 lasers projected over an object to capture the geometry and texture as it rotates on a turntable.

Click Here If You Need More Detailed Info…

sourcingmap Stepper Motor Nema 17 Bipolar 23mm 0.22NM 1.3A 3.8V 4 Lead Cables for 3D Printer CNC Router Laser Lathe Machine Stage Light Control

The latest version NEMA 17 step motor with holding torque of 220mN.m. Free 2.3ft length jump wire and XH motor cable with a 4-pin 0.1 inch pitch (2.54mm) connector already fitted – ready to plug and print! It is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications.

Electrical Specification:
Motor Type: Bipolar Stepper
Phase: 2
Rated Voltage:3.8V
Rated Current: 1.3A
Inductance:2.8mH +/- 20%(1KHz)
Holding Torque:?220mN.m
Electric Resistance:2ohms +/-10%

Physical Specification:
Frame Size: 42 x 42mm
Body Length: 33mm
Shaft Diameter: 5mm
Shaft Length: 23mm
Number of Leads: 4
Weight: 223g

Wire Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

WARNING:
As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor.
To choose a driver, please make sure the driver output current not higher than motor rated current, and voltage not higher than 36V.
Please take care of wires coils order when you connecting to driver or it will damage your driver.

Product Features

  • Rated Voltage: 3.8V; Rated Current: 1.3A; Phase: 2
  • Electric Resistance: 2ohms+/-10%; Holding Torque: 220mN.m
  • Number of Leads: 4; Inductance: 2.8mH+/-20%
  • Shaft Diameter: 5mm/0.2″; Shaft Length: 23mm/0.91″; Frame Size: 42x42mm/1.65″x1.65″
  • Free 2.3ft jump wire and XH motor cable with 0.1″ pitch connector already fitted

Detailed Information available on our Homepage…

sourcingmap Stepper Motor Nema 17 Bipolar 300mm 0.38NM 1.7A 4.9V 4 Lead Wires for 3D Printer CNC Router Laser Lathe Machine Stage Light Control DIY Hobby

The latest version NEMA 17 step motor with holding torque of 380mN.m. Free 2.3ft length jump wire and XH motor cable with a 4-pin 0.1 inch pitch (2.54mm) connector already fitted – ready to plug and print! It is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications.

Electrical Specification:
Motor Type: Bipolar Stepper
Phase: 2
Rated Voltage:4.9V
Rated Current: 1.7A
Inductance:3.2mH +/- 20%(1KHz)
Holding Torque:?380mN.m
Electric Resistance:2ohms +/-10%

Physical Specification:
Frame Size: 42 x 42mm
Body Length: 42mm
Shaft Diameter: 8mm
Shaft Length: 300mm
Number of Leads: 4
Weight: 357g

Wire Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

WARNING:
As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor.
To choose a driver, please make sure the driver output current not higher than motor rated current, and voltage not higher than 36V.
Please take care of wires coils order when you connecting to driver or it will damage your driver.

Product Features

  • Rated Voltage: 4.9V; Rated Current: 1.7A; Phase: 2
  • Electric Resistance: 2ohms+/-10%; Holding Torque: 380mN.m
  • Number of Leads: 4; Inductance: 3.2mH+/-20%
  • Shaft Diameter: 8mm/0.31″; Shaft Length: 300mm/11.81″; Frame Size: 42x42mm/1.65″x1.65″
  • Free 2.3ft jump wire and XH motor cable with 0.1″ pitch connector already fitted

Detailed Information available on our Homepage…