CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10

Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only suitable for 3D printer using indoors Attention: Small parts, keep away from children Package including: 15PCS x 2mm heating block cotton 1PCS x6mm Kapton Tape WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Product Features

  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape

Visit The Website For More Information…

UEETEK 10pcs Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Description

This item is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use. It is used for 3D printer nozzle keeping warm. It is with super good heat insulation for better printing effect. You can design a suitable size to make a hole of the heating block cotton.

Features

– Color: Yellow.
– Material: Ceramic fiber.
– Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).
– Can work for a long time in a high temperature below 300 degrees.
– Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
– Resistance to thermal shock, low thermal conductivity and thermal capacity.
– Perfect for keeping 3D printer nozzle warm and bringing better printing effect.

Package Including
10 x Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Product Features

  • Can work for a long time in a high temperature below 300 degrees.
  • Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
  • Resistance to thermal shock, low thermal conductivity and thermal capacity.
  • Perfect for keeping 3D printer nozzle warm and bringing better printing effect.
  • Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).

Detailed Information available on our Homepage…

UEETEK 20pcs Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Description

This item is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use. It is used for 3D printer nozzle keeping warm. It is with super good heat insulation for better printing effect. You can design a suitable size to make a hole of the heating block cotton.

Features

– Color: Yellow.
– Material: Ceramic fiber.
– Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).
– Can work for a long time in a high temperature below 300 degrees.
– Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
– Resistance to thermal shock, low thermal conductivity and thermal capacity.
– Perfect for keeping 3D printer nozzle warm and bringing better printing effect.

Package Including
20 x Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Product Features

  • Can work for a long time in a high temperature below 300 degrees.
  • Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
  • Resistance to thermal shock, low thermal conductivity and thermal capacity.
  • Perfect for keeping 3D printer nozzle warm and bringing better printing effect.
  • Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).

Visit The Website For More Information…

Gaoxing Tech. 10 Pcs 3mm Thick Heating Block Cotton Nozzle Heat Insulation For 3D Printer

Description:

The key parts of the 3D printer – Heated aluminum block insulation, the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.
High temperature: long-term work at a high temperature of 900 °

Package included:

10 x 3MM Fast Heating Insulation Cotton Cotton Insulation Coating 70 X 20MM For 3D Printer

Product Features

  • The key parts of the 3D printer – Heated aluminum block insulation,
  • the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.
  • High temperature: long-term work at a high temperature of 900 °

Visit The Website For More Information…