SODIAL 3D Full Metal J-Head Hotend Remote Wade Extruder Kit CR8/CR10 For 3D V6 1.75/3.0MM Bowden Extruder 0.4 Nozzle 3D Printer Part(red)

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 3D Full Metal J-Head Hotend Remote Wade Extruder Kit CR8/CR10 For 3D V6 1.75/3.0MM Bowden Extruder 0.4 Nozzle 3D Printer Part(red)
colour: red
Material: aluminum
Package Contents:
1* CR8 / CR10 for V6 1.75
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • Item Type: J-Head
  • Nozzle: 0.4Mm
  • Filament: 1.75/3Mm

Visit The Website For More Information…

Tenlacum 12V 40W MK8 Extruder Hotend with Thermistor,M6x30mm Throat and 1.75mm to 0.4mm Nozzle Print Head Hot End Assembled for Extruder 3D Printer

Tenlacum 1.75mm to 0.4mm MK8 Nozzle Print Head Hot End Assembled for Extruder 3D Printer

Specification:
Throat nozzle size: M6x30mm;
Nozzle diameter:0.4mm
Filament compatibility:1.75mm ABS/PLA/Flexible/Others

Thermisitor:
– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
– High accuracy: 1%
– Resistance value at 25°C=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter
Cartridge heater:12V,40W; Cable Length:1 meter;

Package List:
1*MK8 extruder hotend kits

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

The measurement allowed error is +/- 1-3cm.

Product Features

  • Chamfer design on throat nozzle ,much easier for filament feeding
  • M6x30mm stainless steel throat nozzle+ PTFE liner+ heater block +print nozzle +thermistor + cartridge heater for makerbot
  • Easy to be installed and a good replacement for mk8 extruder
  • pdated tube for low friction, trouble free print, and nozzle can be exchanged or replaced with many different types of nozzles.It would be a great replacement for old extruder.
  • 12V version with 40W red heat tube. Use it with heat sink or cooled metal base to enhance heat dissipation.

Visit The Website For More Information…

E3D V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers

V6 has the following advantages over V5:
1, to reduce the heat sink length, thickness and diameter (shorter length is conducive to the stability of increasing the heat end), while increasing the number of fins, the heat end reduce weight at the same time, has better heat dissipation performance and stability.
2, external rotation gas heavy joint for a built-in pipe clamp, further reduce weight and reduce the hot end length, also make the feeding tube more deeply into the hot end, feeding more powerful (pneumatic connector can only be inserted a small tube into the feeding, easy to cause the feed is not smooth and other issues).
3, improving the original heating block, appearance is more concise and practical, heating tube, a thermistor and aluminum block contact more fully, and thus more precise temperature control outstanding.

Specification of Extruder Tube: 
Type : Nozzle Throat 
Outer Thread : M6 M7 
Nozzle Throat Outer Diameter:6mm 
Nozzle Throat Inner Diameter:4mm 
Teflon Pipe Inner Diameter : 2mm 
Length : 22.5mm 
Filament Diameter : 1.75mm 
Material : Stainless Steel 
Specification of Brass Nozzle: 
Type : Extruder Brass Nozzle Print Head 
Color: Golden 
Material: brass 
Input Diameter: 1.75mm 
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 
Note:  Compatibility:Compatible with all 1.75mm V6 Makerbot 3D printer  
Attention: Small parts, keep away from children 
package including: 
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder 
1 x 0.2mm Nozzle Print Head 
1 x 0.3mm Nozzle Print Head 
2 x 0.4mm Nozzle Print Head 
1 x 0.5mm Nozzle Print Head 
5 x 1.75mm Stainless Steel Nozzles Throat 
1 x L-shaped wrench

Product Features

  • Reduce the heat sink length, thickness and diameter (shorter length is conducive to the stability of increasing the heat end), better heat dissipation performance and stability.
  • External rotation gas heavy joint for a built-in pipe clamp, make the feeding tube more deeply into the hot end, feeding more powerful (pneumatic connector can only be inserted a small tube into the feeding, easy to cause the feed is not smooth and other issues).
  • Improving the original heating block, appearance is more concise and practical, heating tube, a thermistor and aluminum block contact more fully, and thus more precise temperature control outstanding.
  • This 3D Printer J-head Hotend is applied for 1.75mm/0.4mm Filament Long-Distance Filament Bowden extruder
  • To improve the original heating block, appearance is more simple and practical, heating pipe, thermistor and fuller contact with aluminum block, whereby more precise temperature control prominent.

Click Here If You Need More Detailed Info…