TOOGOO 3D Printer Parts HT-NTC100K Thermistor Temperature Sensor for High Temperature Filament 350 Degrees B3950 For 1M

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.
TOOGOO(R) 3D Printer Parts HT-NTC100K Thermistor Temperature Sensor for High Temperature Filament 350 Degrees B3950 For 1M
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
Model: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC)Thermistor Model: B3950
Temperature measurement head size: 3 * 15mm
Material: ABS
colour: white
Length: 1 M
Package Contents: 1* Thermistor Temperature Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • The improvements compared to the other temperature resistance in the market: Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
  • The temperature measurement range is increased from -50 Celsius ~ +250 Celsius to -50 Celsius ~ +350 Celsius. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
  • The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
  • Supports the customization of different specifications, including the temperature head cylinder size, length of the wires. Can be used with the new version of the heater (the new heater can heat up to 350 degrees).

Visit The Website For More Information…

Oshide E10 High Precision DIY 3D Printer Kit With LCD Screen Easy Assemble Aluminum Frame Large Printing Size 220x270x300mm Support TF Card Off-line Printing Support ABS/PLA

3D Printing Application:
1. Industrial Design: product design process board production.
2. Art Design: a highly difficult process to form complex shapes.
3. Mechanical design: verification and testing of mechanical design process.
4. Architectural design:building the prototype design and planning, construction sand table model
5. Medical research and development: design and production of medical institutions.
6. Personalized design: DIY and personalized design enthusiasts production.
7. Educational institutions: model teaching,design and experiment
Item specifics:
Brand: Anet
Type: DIY
Model: E10
Color: Green
LCD Monitor Screen: LCD12864
Heating bed Temperature: Maximum 95 Degrees Celsius
Platform board: Aluminum Sheet
Nozzle quantity: Single
Nozzle diameter: about 0.4mm / 0.02 inch
Product forming size: about 220 x 270 x 300 mm / 8.66 * 10.63 * 11.81 inch
Frame Material: Aluminum Frame + Steel Case
Layer thickness: about 0.1-0.4 mm / 0.00-0.02 inch
Memory card offline print: SD card
LCD Screen: Yes
Print speed: 40 – 120mm/s
Supporting material: ABS,HIPS, PLA
Material diameter: about 1.75mm / 0.07 inch
Layer Resolution: 0.1MM
Nozzle Temperature: Maximum 250 Degrees Celsius
Power Supply: 240W,110V/220V (Switchable)
File format: G-code, STL
Model supporting function: Yes
XY-axis positioning accuracy: 0.015mm
Z-axis positioning accuracy: 0.004 mm
Voltage: 110V/220V
Working Power: 250W
Host computer software: Cura
System support: Windows, XP, Win7, Win8, Win10, Linux, MAC
Product size: about 40.00 x 44.00 x 49.50 cm / 15.75 x 17.32 x 19.49 inches
Package size: about 51.00 x 45.00 x 20.00 cm / 20.08 * 17.72 * 7.87 inch
Package List:
1 * E10 3D Printer DIY Kit
1 * 8GB SD Card
1 * Filament Rack
1 * Manual
1 * Adapter Cable

Product Features

  • The factory installated the machine and tested ,then disassembly kits,very easy to install.Large print size: 220x270x300mm.
  • 12864 LCD screen and keypad for easy offline use.Supporting 0.1 – 0.4 mm thickness printing layer.
  • Supports TF card off-line printing, especially convenient when without the computer.
  • Independent metal power box, fashion and beautiful;Hand twist hot bed nuts, hot bed leveling simple and accurate.
  • More stable aluminum frame ensures your better printing experience. Assembly is simple and suitable for DIY customers.Working condition: 10 – 40 Deg.C, humidity 20 – 50 percent.

Click Here If You Need More Detailed Info…

29 Pieces 3D Printer Accessories, Brass Extruder Nozzle, 1.75 mm Extruder Tube, Cleaning kit, Heating Block, Heating Block Cotton and Polyimide High Temp Tape for MK8 Makerbot


5 Various size brass nozzles:
The 3D printer accessories have 5 sizes, containing 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm and 0.4 mm, meet your printing needs, distinct marks on it so that you can distinguish them easily.

Adhesive tapes:
The 3D printer tools have 3 sizes, strong adhesive ability and heat resistant and width of 3 tapes are 3 mm, 5 mm and 10 mm respectively.

Specifications:
Brass nozzle:
Color: gold
Material: brass
Length: 13 mm
Input diameter: 1.75 mm
Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm

Drill kit:
Material: stainless steel
Bit diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm

Extruder tube:
Material: stainless steel
Outer thread: M6
Nozzle throat inner diameter: 4 mm
Pipe inner core diameter : 2 mm
Length: 30 mm
Filament diameter: 1.75 mm

Aluminum heater block:
Material: aluminum
Dimensions: 20 x 20 x 10 mm (LWH)
Inner hole for set screw: M6 and M3

Heating block cotton:
Material: cotton
Size: 20 x 70 x 3 mm (LWH)

Polyimide film adhesive tape:
Thickness: 0.055 mm
Length: 33 m/ 1 pc
Width: 3 mm, 6 mm and 10 mm
Temperature resistance: 260 – 280°C (260°C for long period usage and 280°C for short period)

Package includes:
6 x Brass extruder nozzle print heads in 5 sizes
5 x Drill bits in 5 sizes with a needle bottle
5 x Extruder M6 tube (30 mm)
5 x Aluminum heater block
5 x Heating block cotton
3 x Polyimide film adhesive tape in 3 sizes

Attention:
Small parts, please keep away from children.
Please note that the mention of any related model designation above is only for purposes of demonstrating compatibility.

Product Features

  • 5 Various size brass nozzles: comes with 6 pcs brass nozzle in 5 different sizes, containing 1 piece of 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm and 2 pieces 0.4 mm, distinct marks on it and you can distinguish them easily
  • Quality 30 mm tube: the barrel tubes are made of quality stainless steel with PTFE inner core, durable, corrosion and heat resistance, reduce printing friction and ensure long time of usage
  • Leakage proof: flat contact surface of the brass nozzle, tight and smooth fittings of stainless steel barrel both can prevent material leakage
  • Heat resistant adhesive tapes: come with 3 adhesive tapes in 3 various size, made of quality silicone and polyimide, strong adhesive ability and heat resistant; The width of 3 tapes are 3 mm, 6 mm and 10 mm respectively
  • Application: suitable for MK8 1.75mm ABS PLA Printers, as Anet A8 Creality CR-10 CR-10S S4 S5 and so on

Detailed Information available on our Homepage…

MZEDE High Performance Auto Level A8 3D Printer DIY Kit, Classic A8 3D Printer, Desktop 3D Printer With Auto Level Print PLA, ABS Filament, Easy To Assemble.

3D Desktop Printer High Accuracy Self-assembly DIY Kit Parameters :
Structure : Acrylic
Extruder quantity: 1
Printing size: 220*220*240mm
Printing size: 8.66*8.66*9.45 in
Layer sickness: 0.1-0.4mm
SD-card: Support
LCD screen: Yes
Printing speed: 100mm/s
Standard extruder diameter: 0.4mm
Extruder temperature: 260 ℃
Hot bed temperature: 100 ℃
Hot bed material: Aluminum Alloy
XY axis positioning accuracy: 0.012mm
Z axis positioning accuracy: 0.004mm
Printing material support: ABS , PLA , HIPS , TPU
Recommended material: PLA
Software language: English /Chinese/French/German/Spanish etc.
Date import format: STL, G-Code
Device dimension: 510*400*415mm
Device dimension:20.09 * 15.75 * 16.34 in
Device weight: 8.5kg
Packing dimension: 510*310*208mm
Packing dimension: 20.09*12.20 * 8.19 in
Packing weight: 9kg
Power supply: 110V/180V/220V
Operating system: Win , Mac , Linux
Printing software: Cura , Repetier-Host
Working condition Temp: 10-40℃,Humidity:20-50%
Note: The package includes all the parts and tools for a whole 3D printer, but it not an already assembled machine so it need you assembling.

Video Tutorials:
A8 3D printer demonstration Video:
https://www.youtube.com/watch?v=UYgkAr0uxyw
A8 3D Printer Assembly Video 1:
https://youtu.be/-tiHfzBQZpI
A8 3D Printer Assembly Video 2:
https://youtu.be/EbNocv6-OOQ

Product Features

  • Proven Technique : A volume of nearly 100 thousands production output per year from our factory , This A8 printer is really popular in school education , industry and personal DIY .It means that it is proven technique which has experienced much practice.
  • Auto level feature , machine upgraded with a ultrasonic sensor, saving your time, bringing more interest and convenience when starting your article. Suppose you are new to 3D printer , it would be awesome to have this feature jumping the boring process of leveling heat bed.
  • Excellent Function : LCD to display printing process , temperature ; compact acrylic framework; offline printing , 5 navigation push buttons make it easy to operate ; Metal nozzle no easy to block ; High quality step motor up to 1000 hours constantly working time ; and 180W power supply adequate energy.
  • Everything is Ready : All the tools for assembly are ready in the package including screwdriver , nipper, spanner etc . A SD card with full installation guide and software is in the package except the installation video , but we share these videos URL link in a document.
  • Customer Service : Professional technical engineers are always available if you meet any questions during assembling . Please send us e-mail and you would get fast reply.

Click Here If You Need More Detailed Info…