TopDirect V6 J-Head Hotend Metal Hot End Hotend Extruder Full Kit with 10 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for V6 Makerbot RepRap 3D Printers

12V/40W heater, the temperature can up to 280℃ (Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing 4mm OD and 2mm ID
PC4-01 Tube Fitting

Extruder Tube:
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 22.5mm
Filament Diameter: 1.75mm
Material: Stainless Steel

Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: Brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm

Note: Compatible with all 1.75mm V6 Makerbot 3D printer.

Package Contents:
1 x All Metal V6 J-Head Hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat

Important Tips:
Before installation, it must be printed the support for the thrust fork that will be fixed on the machine body, and the support bracket of the extruder and the cooling fan of the extruded material. Note: if you only print PLA, you can also use it for the support, if you also print in ABS, then use the latter, because the heat of the plate tends to very soften the PLA with melt results.
If your printer is Anet A8, please note: the fan wire is short, so it must be lengthened. The 2-pin JST connector of the thermocouple is not suitable, you’ll have to replace it with a 3-pin JST or a patchwork with the original one (the polarity is doesn’t matter).

Product Features

  • V6 all-metal printer head, 100% brand new and high quality.
  • 12V/40W heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280℃, 12V high speed fan, lose heat quickly.
  • Compatible with all 1.75mm V6 Makerbot 3D printer.
  • Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • Package Include: All Metal V6 J-Head Hotend Full Kit + 10 Pcs Extruder Brass Nozzle Print Head + 5 Pcs Stainless Steel Nozzle Throat

Visit The Website For More Information…

YaeKoo All-Metal V6 J-Head Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot RepRap 3D Printers(10)

Compatibility:

Compatible with all 1.75mm E3D V6 Makerbot 3D printer

Product description

All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers

Specification of All Metal V6 Hotend Full kit:

12V/40W heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:

Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:

Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer
Attention: Small parts, keep away from children

Package including:

1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm Nozzle Print Head
1 x 0.3mm Nozzle Print Head
2 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat
1 x M4 Hex driver.

Product Features

  • 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
  • Easy to install: NTC connector with terminal, you can install directly
  • Compatibility: Compatible with all 1.75mm E3D V6 Makerbot 3D printer
  • All Metal V6 Hotend 12v/40w/1.75mm/0.4mm Extruder Full Kit(V6 print head + fan + fan cover + PTFE tube + tube fitting, 5 pcs Extruder Brass Nozzle Print Head(1×0.2mm/1×0.3mm/2×0.4mm/1×0.5mm) , 5 Pcs Stainless Steel Nozzle Throat and M4 Hex driver

Detailed Information available on our Homepage…

YOTINO 10Pcs Nozzle Cleaning Tool Kit, Print Head Cleaner Drill Bits for 3D Printer Exturder Nozzle Cleaning(0.2mm 0.3mm 0.4mm 0.5mm 0.6m each size 2pcs)

YOTINO 10Pcs Nozzle Cleaning Tool Kit not only for 3D Printer Nozzle, but also for circuit boards, electronics, SMT, mold, hardware processing, telecommunications and other industries
Different colors silicone grip gasket on behalf of different sizes, engraved on the size of the needle punched in the drill bit, easy to distinguish.

Specification:
Material: Tungsten Steel (Drill)+Stainless Steel (Handle)
Bit diameter: 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm
The bit length: 17mm
The length of shank: 22mm
Total length: 39 mm
Color: Random

Package include:
10 x Cleaning Drill bits

Product Features

  • ▶As blocks happen much during printing, and the extruder nozzle must be constantly cleaned to ensure printing runs fluently, but difficult to access inside the nozzle, cleaning drill bits are perfect for helping you to solve the clogging problem
  • ▶Cleaning drill bits needle spiral design, easy to insert the nozzle, clean up the blockage, not easy to damage the nozzle
  • ▶Material: Needle: tungsten steel, needle handle: white steel, high hardness, good toughness; needle length: 37mm, needle diameter: 3mm
  • ▶Note: Do not use drill bits to clean nozzles until they have been heated above 200℃. Pay attention to the angle of the nozzle when using
  • ▶Kit includes: 2 x Cleaning drill bits 0.2mm 0.3mm 0.4mm 0.5mm 0.6m, with a plastic packing box

Click Here If You Need More Detailed Info…

3D Printer Tool Kit Include 6 Pieces 0.4 mm Brass Extruder Nozzle Print Head, 6 Pieces 30 mm Length Extruder 1.75 mm Tube, 3 Pieces 0.4 mm Cleaning Drill Bits with 2 Pieces Hex Drivers for MK8 3D Prin


3D printer tool kit include 6 pieces 0.4 mm brass extruder nozzle print head, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm cleaning drill bits with 2 pieces hex drivers for MK8 3D printers

3D printer tool set:
Anti-leakage and anti-blocking design, outer thread, you can install directly, compatible with most 1.75 mm PLA ABS 3D printer.

Specifications:
Nozzle print head:
Type: 0.4 mm extruder brass nozzle print head
Color: golden
Material: brass
Oversize: 8 x 13 mm
Input diameter: 1.75 mm
Output diameter: 0.4 mm

Nozzle inputting tube:
Type: nozzle throat
Compatibility: 3D printer
Outer thread: M6
Nozzle throat outer diameter: 6 mm
Nozzle throat inner diameter: 4 mm
Pipe inner diameter: 2 mm
Length: 30 mm
Filament diameter: 1.75 mm
Material: stainless steel

Cleaning drill bits:
Type: drill bit
Bit diameter: 0.4 mm
Bit length: 7 mm
Shank length: 31 mm

Package include:
6 x 0.4 mm brass extruder nozzle print heads
6 x 30 mm length extruder 1.75 mm tube
3 x 0.4 mm cleaning drill bits
2 x Hex drivers

Attention:
1. Don’t use the drill to clean until the nozzle is heated to above 200 degrees.
2. Small parts, keep away from children.

Product Features

  • Package include: 6 pieces 0.4 mm brass extruder nozzle print heads, 6 pieces 30 mm length extruder 1.75 mm tube, 3 pieces 0.4 mm extruder nozzle drill and 2 pieces hex drivers
  • Nozzle print head: made of brass material; Oversize: 8 x 13 mm; Input diameter: 1.75 mm; Output diameter: 0.4 mm
  • Nozzle inputting tube: made of stainless steel; inner diameter: 2 mm; Length: 30 mm; Outer thread: M6; Filament diameter: 1.75 mm
  • Cleaning drill bits: bit diameter: 0.4 mm; Bit length: 7 mm, the length of shank: 31 mm; Comes with a plastic box, convenient to store
  • Good compatibility: these 3D printer tool kit is compatible with most 1.75 mm PLA ABS 3D printer

Detailed Information available on our Homepage…