Extruder Hot End Full Kit, 3D Printer J-head 1.75mm Direct (Universal) 12V for Prusa i3 Reprap 3D Printer

Product Features

  • This J-type Hot End is of all-metal design and fully compatible with the market-leader. Developed and tested in the UK it brings together quality innovative components from multiple sources to give top class performance at a very competitive price.
  • Our NTC Thermistor has a crimped cartridge and is fibreglass sleeved for improved strain relief and heat protection, 3mm diameter x 15mm Brass Cartridge 100k Ohm 4276K
  • Tested and qualified in the UK, our purpose made high power ceramic heater cartridge gives a much-improved performance over fragile and poor tolerance enamel resistors. Hotends heat quickly and hit the highest of temperatures. Quick release connectors provide easy & quick access to the hot end for maintenance and avoids the necessity of rewiring back to the control board. Crimped terminals to the control board give improved connectivity and reliability.
  • The kit also includes a high-speed, high flow fan with high quality brush-less bearings. Quick release extender cable has JST at fan end and a 2.54mm pitch dupont/molex at the control board end for compatibility with Ramps/Rambo and similar. Air Flow 5.6 cfm
  • Kit is supplied configured for use in direct mode, which includes a short length of PTFE tube which is inserted into the heatsink and pushed into the top of the heat-break. To use in Bowden mode, you need to simply replace the tube supplied with a longer length plus the means to connect the other end to your extruder. Nozzles are fully interchangeable with the e3d range & other compatible nozzles and accessories.

Click Here If You Need More Detailed Info…

KKmoon 3D Printer Extruder Full Metal Sprayer Nozzle with Fan for Remote 1.75/0.4mm Accessories of 3D Printer

Easy to use and install, has a long service life. It is a prefect accessory for 3D printer.

Features:
Easy to use and install, has a long service life. It is a prefect accessory for 3D printer.
Reduce the length, thickness and diameter of the heat sink (shorter length is beneficial to increase the stability of the hot end), while increasing the number of heat sinks, reducing the weight of the hot end, which has better heat dissipation and stability.
The bulky external rotary pneumatic joint is changed to the built-in pipe clamp, which can further reduce the weight and the length of the hot end, and also making the feeding pipe deeper into the hot end, the feeding is more powerful.
Improve the original heating block, the appearance is more simple and practical, the heating tube, the thermistor and the aluminum block are more fully contacted, so the temperature control is more precise and prominent.

Specifications:
Main material: metal+plastic
Heater: 12V 40W 1meter or 24V 40W 1meter
Thermistor: 100K ohm NTC 3950
Aluminum block: Volcano aluminum block
Fan: 3010 cooling fan
Extruder size: 1.75mm / 0.07in
Nozzle size: 0.4mm / 0.02in
PTFE: 2000 * 4mm / 78.7 * 0.16in
Item weight: 50g / 1.8ounce
Package size: 85 * 55 * 55mm / 3.3 * 2.2 * 2.2in
Package weight: 55g / 1.9ounce

Package List:
1 * 3D Printer Extruder Nozzle Kit

Product Features

  • Easy to use and install, has a long service life. It is a prefect accessory for 3D printer.
  • Reduce the length, thickness and diameter of the heat sink (shorter length is beneficial to increase the stability of the hot end), while increasing the number of heat sinks, reducing the weight of the hot end, which has better heat dissipation and stability.
  • The bulky external rotary pneumatic joint is changed to the built-in pipe clamp, which can further reduce the weight and the length of the hot end, and also making the feeding pipe deeper into the hot end, the feeding is more powerful.
  • Improve the original heating block, the appearance is more simple and practical, the heating tube, the thermistor and the aluminum block are more fully contacted, so the temperature control is more precise and prominent.

Detailed Information available on our Homepage…

pushfocourag Full Metal Feeder Machine Bowden Extruder for Anet A8 Prusa I3 Tevo 3D Printers 3D Printer Extruder Remote Extruder Parts All Metal Wire Feeder Extrusion Head 1.75 Consumables

Item Name: Remote Feed Extruder
Quantity: 1 Set
Material: Metal
Features: Durable, Easy to Use, 3D Printer Accessories
Size: 4cm x 4cm/1.57″ x 1.57″ (Approx.)

Notes:
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Package Includes:
1 x Remote Feed Extruder (Motor Not Included)

Product Features

  • Very useful and durable remote feed extruder.
  • Suitable for Anet A8, Prusa I3, Tevo Tarantula 3D printers, etc.
  • Features: Durable, easy to use, 3D printer accessories
  • Size: 4 cm x 4 cm / 1.57 inches x 1.57 inches (about)
  • This kit does not contain a motor. You need to install the extruder on the motor.

Click Here If You Need More Detailed Info…

Genuine E3D v6.1 HotEnd Full Kit 12v (Direct) (3mm) 3D Printer

From mid-June 2016 E3D Hotends started to use a standard cartridge-type format for temperature sensors. This means a new heater-block and thermistor cartridge is supplied with the E3D-v6 as standard E3Ds new Heater Block gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.

Product Features

  • E3D market-leading Hot End: all-metal design, British engineering, high-temperature 3D printing.
  • The new v6 HotEnd includes a heatblock, which clamps around the cartridge for maximum thermal contact.
  • Responsive temperature control with faster heat up times typically taking only 65 seconds to heat from 20C to 200C
  • High Temperature Peformance. We can reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 400C
  • For best results always fit genuine E3D parts

Visit The Website For More Information…