TopDirect 500mm T8 Stainless Steel Lead Screw Set with Flexible Shaft Couplings 8mm + 8mm Copper Nut + Support Pillow Block + 1.7A 0.4Nm/56.2oz.in Nema17 Stepper Motor for 3D Printer Parts

Features:
– T8 Lead Screw:
Material: Stainless steel
Diameter: 8mm
Pitch: 2mm
Length: 500mm

– Nut:
Material: Brass
Diameter: 8mm
Pitch: 2mm

– Ball Support:
Material: Zinc alloy
Bore diameter: 8mm

– Shaft Coupling:
Material: Aluminium
Shaft: 5 x 8mm
Length: 25mm
Diameter: 20mm

– Stepper Motor:
Type: Bipolar
Holding Torque: 40N.cm
Detent Torque: 2.2N.cm
Step Angle: 1.8 ± 5% (full step, not load)
Wire Length: 40cm

Installation:
1. Put screw nut into the lead screw;
2.Then install the 2 ball bearing separately at both ends of the lead screw;
3. According to the size of you need to adjust the distance between the nut and ball bearing;
4. Put shaft coupling into the lead screw beside the ball bearing.

Package Lists:
1 x 500mm T8 Lead Screw
1 x Brass Screw
2 x Ball Support
1 x Shaft Coupling
1 x Stepper Motor

Product Features

  • Made of premium material for durable and long-lasting use. It’s easy to use and install with long service life. The precise design will ensure its practicability in the work of highly performance.
  • Suitable for most industrial auto equipment, stepper motor rail, such as 3D printers, engraving machine, XYZ module, slider, lifts etc.
  • Lead Screw: 500mm length, 8mm diameter; Brass Nut: 8mm diameter, 2mm pitch.
  • Mounted Ball Bearing: 8mm diameter; Shaft Coupling: 5 x 8mm shaft, 25mm length, 20mm diameter.
  • Package: 1 * lead screw; 1 * brass nut; 2 * ball supports; 1 * shaft coupling; 1 * stepper motor.

Visit The Website For More Information…

ERYONE 3D Printer Magnetic Flexible Build Surface, Durable Print Surface for 3D Printing, 310 * 310mm

[ERYONE Upgrade Magnetic 3D Printing Build Surface for 3D Printers]

Have you any trouble in printing?
The material does not stick on your heated bed surface?
The print is perfect, but it’s damaged when you take it off from the printing platform.

Upgrade your 3D printer printing platform.

[Multi-sizes] Chose you need size for your printer: 310*310*2MM,
235*235*2MM,
220*220*2MM,
165*165*2MM,
120*120*2MM.

Our Flexible Build Surface are made from high quality spring steel that won’t kink or warp when you flex them, they just return back to shape!

Our magnets and films have all been formulated to resist over 130℃ / 226℃ so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.

Simply take off the Build Surface from the hot bed plate Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off!

Product Features

  • 1.Compatible with heated beds of all FDM 3D printers.
  • 2.Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • 3.High quality stainless steel – ensure flexible, easy to take off and clean up; High quality magnetic material – ensure the build surface compatible with all FDM 3D printers heated beds.
  • 4.Magnetic material with pre-packed 3M adhesive, so it’s easy to get your bed perfectly flat before installing the upgrade magnetic flexible build surface.
  • 5.Choose the correct size for your printer: 310x310x2MM, 235x235x2MM, 220x220x2MM, 165x165x2MM and 120x120x2MM available.

Detailed Information available on our Homepage…

ERYONE Upgrade Magnetic Flexible 3D printing build surface with Sticker For 3D Printer 235 * 235mm

[ERYONE Upgrade Magnetic PEI 3D Printing Build Surface for 3D Printers]

Catution:Pls dont remove the PEI film when received!!!!

Have you any trouble in printing?
The material does not stick on your heated bed surface?
The print is perfect, but it’s damaged when you take it off from the printing platform.

Upgrade your 3D printer printing platform.

[Multi-sizes] Chose you need size for your printer: 310*310*2MM,

235*235*2MM,
220*220*2MM,
165*165*2MM,
Our Flexible Build Surface are made from high quality spring steel that won’t kink or warp when you flex them, they just return back to shape!

Our magnets and films have all been formulated to resist over 130℃ / 226℃ so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.

Simply take off the Build Surface from the hot bed plate Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off!

Product Features

  • 1.Compatible with heated beds of all FDM 3D printers.
  • 2.Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • 3.High quality stainless steel – ensure flexible, easy to take off and clean up; High quality magnetic material – ensure the build surface compatible with all FDM 3D printers heated beds.
  • 4.Magnetic material with pre-packed 3M adhesive, so it’s easy to get your bed perfectly flat before installing the upgrade magnetic flexible build surface.
  • 5.Choose the correct size for your printer: 310x310x2MM, 235x235x2MM, 220x220x2MM, 165x165x2MM available.

Detailed Information available on our Homepage…

TRIGORILLA ANYCUBIC Mega-S 3D Printer Updated Extruder suitable for flexible Filament Fully Metal Structure with Patent Ultrabase Heatbed DIY Kit

Mega-S Advantage:

【1】3-Step Fast Assembly: It comes with several assembled parts. You just need install 8 screws and connect 3 wires before your first printing.
【2】TFT Touch Screen: 3.5″ touch screen gives you easy operation and instant previews of 3D model files.
【3】Super Printing size with one-piece structure. Save place and more organized.
【4】Resume Print : It could resume print from where the last print was stopped due to power failure .it saves time and cost.
【5】New Generation ANYCUBIC Mega version: Full metal structure and dual Z axis make it more stable, higher precision and quieter when printing.
【6】24 hours testing before delivery and one year warranty.
【7】Good printing quality, reasonable cost for the beginners and good performance for the enthusiasts.

Specification –

PRINTING:

Modeling Technology:FDM (Fused Deposition Modeling)
Positioning Accuracy: X/Y 0.125mm,Z 0.002mm
Printing Speed: 20~100mm/s
Traveling Speed:100mm/s
Filament:1.75mm PLA,ABS,HIPS,WOOD, Flexible filament: TPU, PETG
Layer Thickness:0.05-0.3mm
Nozzle diameter:0.4mm
Printing Size:210 x210x205 mm
Machine Size: 405x410x453mm
Gross weight:~11 kg

Electrical:

Input:AC 100-220V 50-60Hz
Working Voltage: 12V DC

Software:

Slice Software: Cura
Software Input Formats:STL,OBJ,DAE,AMF
Software output Formats: GCode
Working Mode:Online or SD offline

Temperature:

Max Nozzle Temperature:260℃
Max Hot bed Temperature:110℃
Ambient Operating Temperature: 8℃-40℃

Certifications:

CE, FCC, RoHS ,EN

Product Features

  • 【High Tech Extruder】Updated High Quality Extruder greatly reduces plugging risk and bad extrution to improve printing accuracy. Support more filament 1.75mm: PLA, ABS, HIPS, WOOD, etc. Special is the flexible filament, like TPU, PETG.
  • 【Patent Technology】Anycubic patented heat bed, strong adhesion, smoothly lattice bottom surface. Easier to take off 3D models by hands and could get smoother printing surface
  • 【Large Printing Area】210 x 210 x 205mm. It enables you to print large-size 3D models.
  • 【Filament Sensor】A built-in sensor recognizes low filament levels and will pause printing in progress until filament is reloaded.
  • 【Responsible & Friendly Support】Our warranty is available for 1 Year after the purchase date for all parts of machine (excluded Printhead and damage caused by personal reasons). And we provide lifetime technical support.

Click Here If You Need More Detailed Info…