4pcs TL-Smoother Plus Addon Module with 4pcs Heatsink 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Terminator Reprap MK8 I3

Description:
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.

Parameter:
Heatsink Size: 26mm * 20mm * 6mm / 1.02inch * 0.78inch * 0.24inch
Heatsink material: Aluminum
TL smoother Size: 48mm * 25.3mm * 7.6mm(1.89inch * 1inch * 0.29inch)
Weight: 0.02kg(0.04lb.)

Features:
1. 8 big Package(SMC)diodes provides better heat dissipation performance that can handle bigger motor than small diodes.
2. Lower vibration lower noise smoother result.
3. All the boards adopt a patch diode with a strong consistency, the signal is more stable and the service life is longer.
4. How to use: Connect this TL-Smoother Module to the motherboard’s corresponding drive socket and motor.

TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs

Package Including
4 * 3D Printer TL-Smoother
4 * HeatSink
4 * Du-Pont Lines

Product Features

  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • Product Description: On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • Heatsink size: 26 * 20 * 6mm, material: Aluminum. TL smoother size: 48mm * 25.3mm * 7.6mm.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.

Detailed Information available on our Homepage…

Jolicobo TL Smoother Plus Addon Module 3D Printer Accessories Filter for Pattern Elimination Motor Clipping Filter

This TL-smoother module mainly used for 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.

 

The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor and also provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.

 

All the boards adopt the patch diode with strong TOSHIBA consistency, the signal is more stable and the service life is longer.

 

The TL-Smoother addon module is especially for DVR8825 and A4988/2 and a stepper motor driver with lower resistance.It can also be used for I3 and UM models 3d printer.Please note that the effect of amplitude reduction is different for different models.

 

Connect the filter to the corresponding drive socket of the main board and the motor. Pay attention to the line sequence. We standardize the 4 pin plug. Please directly pull out the wire and solder it to the back of the filter board or directly change the plug.

Product Features

  • This TL-smoother module mainly used for 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor and also provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
  • All the boards adopt the patch diode with strong TOSHIBA consistency, the signal is more stable and the service life is longer.
  • The TL-Smoother addon module is especially for DVR8825 and A4988/2 and a stepper motor driver with lower resistance.It can also be used for I3 and UM models 3d printer.Please note that the effect of amplitude reduction is different for different models.
  • Connect the filter to the corresponding drive socket of the main board and the motor. Pay attention to the line sequence. We standardize the 4 pin plug. Please directly pull out the wire and solder it to the back of the filter board or directly change the plug.

Detailed Information available on our Homepage…

Sortim 10Pcs Disposable Thicken Paper Filter Funnel for Photon SLA UV 3D Printer Accessories

Feature:
Type:SLA Filters
Quantity:10 Pcs

1. For 3D Printer Photon UV LCD.
2. For WanHao D7 DLP 3D Printer.
3. Paper thick, filter well, saving material.
4. The light cured machine is used as a jelly, like jelly. After printing, the slot is remainder.
5. It can be recycled and filtered to the bottle bottle with the filter net.

Notice:
Due to the different monitor and light effect,the actual color maybe a slight different from the picture color.
Included:
10 x SLA Filters for 3D Printer

Product Features

  • For 3D Printer Photon UV LCD.
  • For WanHao D7 DLP 3D Printer.
  • Paper thick, filter well, saving material.
  • The light cured machine is used as a jelly, like jelly. After printing, the slot is remainder.
  • It can be recycled and filtered to the bottle bottle with the filter net.

Detailed Information available on our Homepage…

TL Smoother Addon Module, 4PCS Tl-Smoother Plus, 3D Printer Accessories Filter for Pattern Elimination Motor Clipping Filter A4988 and DVR8255 3D Printer Stepper Motor Driver, MK8 I3

Description:
4PCS TL Smoother Addon Module , ETMall Tl-Smoother Plus , for A4988 and DVR8825 Stepper Motor Driver,MK8 I3
Parameter:

Product Name: TL Smoother PLUS
Applicable: DVR8825 and A4988 / 2 drivers etcs
Length:1.96 inch * Width:1.18 inch)
Weight: 0.26ounces(each)
Note:
The interface of the tl smoother cable is 4pin. If you are using the 4pin connector, you can insert it directly.
Also, pay attention to see the direction of the connection line when you insert it.
About 3d printer use:
When you use 3d printer, you always saw some strange ghosting effect in their smooth curvy 3d printed
pieces. This strange effect is also called Salmon Skin.You may have the best mechanical delta, and with
no reason you saw that strange watermark on you piece.
Why is this still happening
Long story short, DRV8825 and A4988 / 2 drivers stepper driver has an intrisic bug, that is more evident
while they are working at low feedrate (aka low freq), and this bug can cause a missing micro stepping issue.
Why TL-smoother
1.The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor.
2.It provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected
against induction voltages in the unpowered state of the driver.
Tips:
Please contact us if you meet any issue when using. We provide 24-hour service for customers.
Package :
4 * TL-Smoother PLUS

Product Features

  • Function:The TL-Smoother Plus module uses 8 large diodes(SMC),so that provide better heat dissipation performance.That it can handle a motor bigger than small diodes.Less vibration,less noise, smoother result!
  • High Quality:All the boards adopt the patch diode with strong TOSHIBA consistency, the signal is more stable and the service life is longer. TL-Smoother assembly instructions: https://drive.google.com/openid=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs.
  • Applications:The TL-Smoother addon module is especially for DVR8825 and A4988/2 and a stepper motor driver with lower resistance.It can also be used for I3 and UM models 3d printer.Please note that the effect of amplitude reduction is different for different models.
  • Multiple Effection:1.The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor.2.It provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
  • Service: Any questions,please contact us.We have a professional technical and customer service team to solve the problem for you.

Detailed Information available on our Homepage…