Yefun 3D Printer Upgraded Replacement Aluminum MK8 Extruder Drive Feed for CR-10, 10S

Features:

Material:?Aluminum
Package Included:
*Mounting screws
*Aluminum MK8 ‘Extruder’ frame, with bored intake hole.
*Bushing
*Spring
*Brass ‘extruder’ drive gear
*35 mm long teflon intake guide. (keeps filament away from Z-screw rod)
*Special Bowden tube fitting (improved over stock).
For all 1.75 mm filament

Product Features

  • Material: Aluminum
  • Replacement: MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.
  • Upgraded Replacement Aluminum MK8 Extruder Drive Feed for CR-10, 10S S4 S5, it is stable and durable.
  • Easy To Install: All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal
  • Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.

Visit The Website For More Information…

Domybest 3D Printer Extruder Cooling Fan 50x50x15mm DC 12V 0.12A Turbo Fan Accessory Heatsinks

Product Features

  • Work Voltage: DC 12V, Work Current: 0.12A.
  • Size: approx. 50 X 50 X 15 mm/1.97 X 1.97 X 0.59 in, Cable Length: approx. 1 m/3.28 ft.
  • Work Temperature: -20℃ – 75℃, Service Life: 60,000h under 40℃.
  • Suitable for: 3D Printer, 3D Extruder.
  • Package inckuded: 1 X Turbo Fan.

Detailed Information available on our Homepage…

Tenlacum 12V 40W MK8 Extruder Hotend with Thermistor,M6x30mm Throat and 1.75mm to 0.4mm Nozzle Print Head Hot End Assembled for Extruder 3D Printer

Tenlacum 1.75mm to 0.4mm MK8 Nozzle Print Head Hot End Assembled for Extruder 3D Printer

Specification:
Throat nozzle size: M6x30mm;
Nozzle diameter:0.4mm
Filament compatibility:1.75mm ABS/PLA/Flexible/Others

Thermisitor:
– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
– High accuracy: 1%
– Resistance value at 25°C=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter
Cartridge heater:12V,40W; Cable Length:1 meter;

Package List:
1*MK8 extruder hotend kits

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

The measurement allowed error is +/- 1-3cm.

Product Features

  • Chamfer design on throat nozzle ,much easier for filament feeding
  • M6x30mm stainless steel throat nozzle+ PTFE liner+ heater block +print nozzle +thermistor + cartridge heater for makerbot
  • Easy to be installed and a good replacement for mk8 extruder
  • pdated tube for low friction, trouble free print, and nozzle can be exchanged or replaced with many different types of nozzles.It would be a great replacement for old extruder.
  • 12V version with 40W red heat tube. Use it with heat sink or cooled metal base to enhance heat dissipation.

Visit The Website For More Information…

[Improved Version] YOTINO Extruder All Metal Hot End Kit for Creality CR-10 CR-10S S4 S5 3D Printer 1.75mm 0.4mm Nozzle

YOTINO MK8 Extruder All Metal Hot End Kit for CR-10

Description

Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length:30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1M
Package included:

1x Aluminum block
1x Heating tube (heating tube 1 m long, 12V /24V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6*30mm Throat pipe (built-in Teflon)
1x Thermistor + Brass sleeve (1 meter long)

Product Features

  • [Improved All-included Kit] The extruder all metal hotend kit including 1 x aluminum block, 1M heating tube, 1 x 1.75mm 0.4mm brass nozzle, 1 x M6*30mm throat pipe, 1 x thermistor + brass sleeve
  • [Durable Metal Material] Madeof Aluminum & Stainless Steel & Brass, not easy to wear and very durable
  • [Red & White Wire] MK8 Extruder Hot End kit white wire was temperature thermistor, red wire was heating tube 12V/40V 40W
  • [Convenient Set] Extruderis equipped with 1-meter thermistor and heater cable, no extra purchase and easy installation
  • [Original Quality] l100% brand new and high quality, CR-10 nozzle kit original quality

Detailed Information available on our Homepage…