TL Smoother Addon Module, 4PCS Tl-Smoother Plus, 3D Printer Accessories Filter for Pattern Elimination Motor Clipping Filter A4988 and DVR8255 3D Printer Stepper Motor Driver, MK8 I3

Description:
4PCS TL Smoother Addon Module , ETMall Tl-Smoother Plus , for A4988 and DVR8825 Stepper Motor Driver,MK8 I3
Parameter:

Product Name: TL Smoother PLUS
Applicable: DVR8825 and A4988 / 2 drivers etcs
Length:1.96 inch * Width:1.18 inch)
Weight: 0.26ounces(each)
Note:
The interface of the tl smoother cable is 4pin. If you are using the 4pin connector, you can insert it directly.
Also, pay attention to see the direction of the connection line when you insert it.
About 3d printer use:
When you use 3d printer, you always saw some strange ghosting effect in their smooth curvy 3d printed
pieces. This strange effect is also called Salmon Skin.You may have the best mechanical delta, and with
no reason you saw that strange watermark on you piece.
Why is this still happening
Long story short, DRV8825 and A4988 / 2 drivers stepper driver has an intrisic bug, that is more evident
while they are working at low feedrate (aka low freq), and this bug can cause a missing micro stepping issue.
Why TL-smoother
1.The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor.
2.It provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected
against induction voltages in the unpowered state of the driver.
Tips:
Please contact us if you meet any issue when using. We provide 24-hour service for customers.
Package :
4 * TL-Smoother PLUS

Product Features

  • Function:The TL-Smoother Plus module uses 8 large diodes(SMC),so that provide better heat dissipation performance.That it can handle a motor bigger than small diodes.Less vibration,less noise, smoother result!
  • High Quality:All the boards adopt the patch diode with strong TOSHIBA consistency, the signal is more stable and the service life is longer. TL-Smoother assembly instructions: https://drive.google.com/openid=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs.
  • Applications:The TL-Smoother addon module is especially for DVR8825 and A4988/2 and a stepper motor driver with lower resistance.It can also be used for I3 and UM models 3d printer.Please note that the effect of amplitude reduction is different for different models.
  • Multiple Effection:1.The TL-Smoother can effectively eliminate the mechanical chatter generated by the 3D printer motor.2.It provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
  • Service: Any questions,please contact us.We have a professional technical and customer service team to solve the problem for you.

Detailed Information available on our Homepage…

Nihlsen TL-Smoother V1.2 Filter Motor Filtering Vibrating Eliminator with Connect Cable for Driver 3D Printer parts

Features:
Can effectively eliminate the mechanical vibration of the 3D printer motor.
Especially for the parallel arm structure of the machine. 
It is very effective for 8225 drive, 4988 drive and low resistance motor. 
I3 and UM models can also be used, and the clipping effect of different machines will vary.
Comact size and easy to install.

Descriptions:
The board adopts the patch diode with strong TOSHIBA consistency.
The signal is more stable and the service life is longer.

Specifications:
Version: V1.2
Material: electronic components
Size: 70*40*15mm
Color: blue

Package included:
1 x TL-Smoother 

Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!

Product Features

  • Can effectively eliminate the mechanical vibration of the 3D printer motor.
  • Especially for the parallel arm structure of the machine.
  • It is very effective for 8225 drive, 4988 drive and low resistance motor.
  • I3 and UM models can also be used, and the clipping effect of different machines will vary.
  • Comact size and easy to install.

Visit The Website For More Information…

FengYun 3D Printer Add-On Super Silent, LV8729 3D Printer Subdivision Stepper Motor Driver

The LV8729 is an ultra-quiet in-line driver module developed to meet the needs of the market. It is simpler to use and is the choice for a quiet environment for printers.
feature of product:
1. In the 64 subdivision or 128 subdivision, you can have a better ultra-quiet effect;
2. Working voltage: 6V-36V, the recommended voltage is 12V;
3. The maximum current is 1.5A, the default is 0.8A;
4. Subdivision: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128;
5. 4-layer PCB board with the back side of the chip facing up, plus heat sink for better heat dissipation.

1x Module

Product Features

  • Work Voltage: DC 6-36V (12V recommended) Work Current: 0.8A (max 1.5A)
  • Suitable for MKS Robin, MKS GEN, MKS SBASE. Works on Ramps with MKS CD.
  • LV8729 3D Printer Subdivision Stepper Motor Driver,compatible with MKS OCS controller.
  • Your ideal choice for quiet 3D printer add-on super silent.
  • 4 Layers PCB design, better heat insulation with a heat radiator.

Detailed Information available on our Homepage…

KEYESTUDIO 3D Printer Controller Kit with CNC Shield V0.9A, 4pcs A4988 Stepper Motor Driver with Heatsink kits for Arduino

The A4988 module is a DMOS microstepping driver with converter and overcurrent protection, which can operate a bipolar stepper motor in full, half, 1/4, 1/8 and 1/16 step modes, with output-driven performance up to 35 V and ± 2A. The A4988 also includes a fixed off-time current regulator that operates in slow or mixed-decay modes.

Specifications of CNC V0.9A
1.Microprocessor:MEGA328p
2.Input Voltage:DC 12V
3.Supporting File Format:Gcode
4.Supporting Machine Structure:CNC, laser engraving machine, writing robots
Features of A4988 Driver
1.With simple stepper and direction control interface.
2.Five different step modes: full, half, 1/4, 1/8 and 1/16 step modes.
3.Adjustable potentiometer used to adjust the max current output to gain higher step rate.
4.Automatic decay mode detection/selection.
5.Overheat closed circuit, under-voltage lockout, cross-current protection.
Ground short-circuit protection and load short-circuit protection

Shipping List:
CNC GRBL V0.9 Metherboard x1
A4988 Reprap Stepper Motor Driver x 3
50cm USB Cable x 1

Product Features

  • Keyestudio CNC GRBL V0.9 is a main board developed by keyestudio for CNC, laser engraving machine, writing robots and other robots.
  • The A4988 module is a DMOS microstepping driver with converter and overcurrent protection, which can operate a bipolar stepper motor in full, half, 1/4, 1/8 and 1/16 step modes, with output-driven performance up to 35 V and ± 2A. The A4988 also includes a fixed off-time current regulator that operates in slow or mixed-decay modes.
  • It has complete interfaces with cost-effective and can be driven via external connection, suitable for DIY and factory use.
  • Scan the Qr code on the picture to get the tutorial about the pin explanation, wiring diagram, how to install software and testing the board
  • Make projects like laser engraving, writing robot and oddball drawing machines etc

Click Here If You Need More Detailed Info…