Creality Aluminum MK8 Extruder Drive Feed for CR-10 CR-10S 3D Printer Part by Luxnwatts

Thank you to order from Luxnwatts for Creality 3D Printer Parts

Package List
Mounting screws
Aluminum MK8 extruder frame, with bored intake hole
Bushing
Spring
Brass extruder drive gear
35 mm long Teflon intake guide. (keeps filament away from Z-screw rod) Special Bowden tube fitting (improved over stock) For all 1.75 mm filament

Product Features

  • Upgrading: Original Aluminum Drive Feed for CR-10, CR-10 S4, CR-10 S5, it is stable and durable
  • Replacement: MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5

Visit The Website For More Information…

KKmoon 1pcs Nema 17 Stepper Stepping Motor Drive Control 2 Phase 1.8 Degree 0.9A 0.4N.M 42mm with 90cm Lead Cable 3D Printer/CNC Accessory Replacement

The popular Nema 17 stepper motor, features 1.8 degree step angle, 2 phase, allowing for a holding torque of 0.4N.M. Frame Size: 42 * 42 * 38mm.

Feature:
Apply for 3D printer, machinery and equipment.
1.8 degree step angle, 0.4N.M holding torque.
Motor size: 42 * 42 * 38mm.
Lower noise and running temperature.
Comes with a 90cm connecting cable.

Specifications:
Material: Metal
Step Angle: 1.8 Degree
Phase: 2
Voltage: 3.96V
Current: 0.9A
Holding Torque: 0.4N.M
lead: 4
lead Length: 90cm / 35.4in
Frame Size: 42.3 * 42.3 * 38mm
Shaft Diameter: 5mm
Item Weight: 276g / 9.8oz
Package Size: 5 * 5 * 8cm / 2.0 * 2.0 * 3.1in
Package Weight: 280g / 9.9oz

Package List:
1 * Step Motor
1 * Cable

Product Features

  • Apply for 3D printer, machinery and equipment.
  • 1.8 degree step angle, 0.4N.M holding torque.
  • Motor size: 42 * 42 * 38mm.
  • Lower noise and running temperature.
  • Comes with a 90cm connecting cable.

Detailed Information available on our Homepage…

2 PCS MK8 Direct Drive Extruder Hobbed Gear 1.75mm Filament 3D Printer Extruder Pulley 5mm Shaft Reprap

High Quality Stainless Steel MK8 Drive Gear.

Dimension: 11mm (height) x 9mm (outer diameter)
Material:Stainless Steel
Effective diameter: 7mm
Shaft/Bore size: ø5mm

The MK8 is an evolution of the MK7 Drive Gear. The smaller diameter gives 35% more power, and allows for more compact extruder designs.

If you need a replacement gear, or you’re designing your own custom project, this is the part! Very sharp teeth to dig into the plastic filament for the best grip ever. Direct drive of the filament will give better prints, but you can also use these in a matching bowden-extruder.

These gears are designed to work with 1.75mm filament, and do so perfectly.

Product Features

  • High Quality Stainless Steel MK8 Drive Gear.
  • The MK8 is an evolution of the MK7 Drive Gear. The smaller diameter gives 35% more power, and allows for more compact extruder designs.
  • Plastic filament in 3D Printers, Deep grooves.
  • These gears are designed to work with 1.75mm filament, and do so perfectly.
  • If you need a replacement gear, or you’re designing your own custom project, this is the part! Very sharp teeth to dig into the plastic filament for the best grip ever. Direct drive of the filament will give better prints, but you can also use these in a matching bowden-extruder.

Visit The Website For More Information…

2pcs Aluminum 5mm Bore H-type Timing Belt Drive Idler Pulley with Bearing for 3D Printer

This is synchronous aluminum belt pulley is designed for 3D printer. It is an 3D printer accessory for 6mm wide belt with 20 teeth. As an H-type synchronous pulley wheel, you will find it perfect for 3D printer or similar projects.

Specifications:
Material: Aluminum Alloy
Tooth: 20 (T)
Pitch: 2mm / 0.078″
Inner Diameter: 5mm / 0.196″
Belt Width: 6mm / 0.236″
Overall Size: 18 x 8mm / 0.7 × 0.31″
Weight: 8g (approx.)

Package Included:
2 x Belt Pulleys

Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Product Features

  • High quality aluminum alloy, excellently machined, durable and virtually
  • Suitable for 6mm width GT2 timing belt pulley
  • H-type synchronous pulley wheel, Pitch: 2mm / 0.078″
  • Inner Diameter: 5mm / 0.196″; Belt Width: 6mm / 0.236″; Overall Size: 18 x 8mm / 0.7 × 0.31″
  • Perfect tool for building a 3D printer or similar projects

Visit The Website For More Information…