Homecube 3D printing pen can help children to improve spatial thinking ability, to encourage their creative imaginations.
It can be heated directly with mobile power,make it more convenient to use.
Currently on the market commonly used power model capacity is 3350MAH,5200MAH,10000MAH,13000MAH. The 3D pen can be separately normally used for 60 minutes, 100minutes, 180 minutes,230 minutes.
Use:3D pen,DIY drawing
Supplies type:ABS / PLA
Adjustable heating temperature range : PLA(185-195℃), ABS(210-220℃)
Speed of extrusion:adjustable 1-4 file
Power supply:DC 5V/2A
1 x 3D Pen
1 x Power Adapter
1 X Pen cap
3 x 3M PLA Printing Filament
1 x User manual
1. The pen is suitable for children over 8 years old and adult. It can be used by children under the guardianship of adults.
2. Front near the tip and the device for high temperature danger zone, so it is forbidden to touch or use the pen point touch other items.
3. It is prohibited to insert foreign body into the entry hole.
4. Keep the pen away from water or any other liquids.
5. Prevent falling from high altitude place or away for kids’ touch.
- HUMANIZED DISPLAY & SAFE: LCD display can directly show the information like supplies type, speed, temperture and safe warning. Aviation ceramic nozzle material make it safer while using.
- POWER SUPPLIER: AC/DC adapter 5V 2A.It can be driven by standard power bank. No need AC/DC adapter, just plug the device into your USB port, so you can enjoy your paintings anywhere.
- SMART OPERATION: Two materials choices,support shift between PLA and ABS.Support dual-mode for feeding,Hold the “Forward” button to feed continuously and release to stop feeding, or double press the “Forward” button to feed continuously and press again to stop feeding.1-4 file adjustable discharging speed.Long press “Return” button for 2 seconds to return the supplies automatically.
- INTELLIGENT SLEEP: The device will enter into sleeping mode automatically and the LED screen will display “SLEEP” when the device is not used more than 3 minutes. If you need to use it again, press “Forward” button to trigger it.
- PRODUCT GRARANTEE: CE ROHS FCC Certified, 24 hours email customer service support. 30 days free return/replacement.
Check Out Our Website For Details…
1.Plug the AC adapter into the electrical outlet,the other end of the DC plug into the”power input hole”at the end of this drawing pen.The Yellow LED lights on,the equipment is power on and enter to standby model.
2.The LCD screen nill display words”ABS”or”PLA”,choose the right material model,”material selection,temperature adjusting.”from the LCD screen.The selection must be same as the material attribute consistent,in order to avoid failure
3.Keep on pressing the Load filament button,the red LED lights on,shows that the equipment is preheating.About 0.5-2 minutes later,when the rea LED turn to blue,shows preheating finished and the equipment can start to work.
4.Insert the filament into the”Filament import hole”,long pressing the”Load filament button,”the filament is delivering by the inner motor.When there is material come out from the nozzle,the filament loading is success.
5.Start creating.(The step-less speed regulating function of this equipment can adjust the material amount according to the speed when you are creating.No need to use both hands.
6.The same material filaments have different melting points because of different colors.Please fine tun the temperature according to the according to the spin silk.(the material melting point judgment and temperature adjustment Please refer to “temperature fine-tuning”)
7.Do not touch the nozzle and heating part during using.
8.The equipment will switch to standby mode automatically when not use over 5 minutes.The working indicator LED will off.If need to use again,need to press the “Load filament button” to make it back to work.
9.When need to unload or replace the filament,please repeat step(2),then long press the”wire back button”.
*The heating time affected by setting ucmperature and the environmentai temperature.
Cut the filament ending flat before insert it into the pen.
Advise to unload the filament when finish using.
- Easy To Replace:To ensure proper use,read the instrucions carefully and use them in accordance with instructions,As long as gently press the buckle,users can remove the heating coil and nozzle,then replace,without the process of guidance or retreating repair by dealer,reducing much more perplexities
- Simple And Practical:The product is lightweight,a slim (easy to handle) design,meet the needs of children,students and adults With variable speed feature,you can freely control it according to the hand speed,allowing users in the creation of real time three-dimensional painting done most practically and with ease
- Design Of Intelligent Standby Function:The product will automatically switch to standby mode in 5 minutes,when you rest in operation or forget to turn off the power,the heating ring will stop working.When restart,the product begin to heat up,to avoid the risk of forgetting turn off the power
- Design Of Temperature Regulatiopn And Continuous Speed Regulation:The function of regulating temperature has been increased.Users can adjust by themselves,according to different consumptive materials,to achieve the desired temperature
- Warning! 1.This equipment is suitable for children over 8-years-old and adult using.Children need to be used under the guardianship of adult.2.The nid and its near part of this equipment is high temperature can reach 446 ℉,therefore no any hand touching or touch other objects by the nib.3.It is prohibited to use foreign body to insert into the feed hole.
Check Out Our Website For Details…
3D printing pen
A material way : hot melt extrusion molding accumulation
Forming: three-dimensional shape
Print Range : indefinite
Spinning speed : Adjustable
Heating temperature in the range :160- 250 degrees
Device operating voltage : 12V 3A
Nozzle directly :0.4-0 .7 mm
Material: Plastic shell
Weight : 0.4kg
Weight : 0.45kg
Package Size: 22cm width 17cm height 6.3cm
For groups : Painting workers, product designers , hobbyists , children, students, etc.
1 x 3D Stereoscopic Printing Pen
1 x 12V3A Power Adapter
1 x User Manual
1 x Free 30G ABS supplies Product parameters
5 x Drawing template paper
Safety and Warning Instruction
1. This 3d pen is suitable for children above 8 years old and adult; Children should use it under the guardian of adult.
2. The nozzle and surrounding area can reach a 230 degree high temperature, keep your bare hands away from the nozzle.
3. Keep it in safe place out of children’s reach and avoid falling.
- 3D printing pen is used to make crafts, school projects, home decor, gifts, and much more!
- 0.4-0.7 mm copper nozzle for fine 3D freehand drawing (Tip is very hot)
- Intelligent Standby function, intelligent standby function allows you to leave of your work without troubles
- Safe and accurate thanks to its fast cool technology
- Included:3D stereoscopic printing pen; Power Adapter;free filaments (ABS) 10g of each 3 colors
Visit The Website For More Information…
1 Pack X 12 Colors PLA Filament
- Each Colour Length:5M/16.4ft
- Colour:6 colour + 6 glowing(glowing in the dark)
- Print Temperature:160-200 Degree Celsius
Check Out Our Website For Details…