HICTOP 3D Printer 1.75mm ABS Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm(White)

Welcome to HICTOP 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • • 1 KG (approximately 2.20 lbs) Spool
  • • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • • ABS (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • • Recommended Extrusion/Nozzle Temperature for ABS: 210°C – 250°C
  • • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Click Here For More Information

Case E PLA 1Kg 3D Filament for Printer and Pens, 1.75mm Diameter, Dimensional Accuracy +/- 0.03 mm,Multiple Colour for Choose (Wood)


Ultra smooth technology
With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object.
Vacuum sealed
Our vacuum sealed packaging guarantees you to experience the best performance by isolating moisturized environment to the filaments.
High compatability
Our filaments had been tested on various brands of 3D printer in the market and with positive customers’ feedback.
We are
Case E is a professional filament manufacturer specialized in providing various colors and materials for 3d printing.
Quality is our top priority as we hand checked each spool, vacuum sealed and packaged. Our filament is proven to maintain smooth and consistent printing experience that achieves best printing result.
Our filament is always round, with no oily residue, no air bubbles, no kinks or breaks and backed by our 100% SATISFACTION GUARANTEE.
Check out our store for new and latest colors and materials for your 3d printer.
Case E is a professional Cross Border E-Commerce company. It has years’ experience and capacities in E-Commerce business area and mainly deals with electronic products. Case E focuses on providing our customer the products with premium quality, satisfied service, practical using, affordable price.
Now, Case E has selected some of the most competitive and front new electronic products out of million. We invite you, and are eager to share with you these great technological achievements. Join us!
Package Includes:
1 X 1.75mm Silver Metal PLA filament (2.2Lbs)

Product Features

  • High quality 1.75mm White PLA material filament, Eco-friendly from Case E.
  • Manufactured to very tight tolerances for +/- 0.03 mm and a wide extruder temperature range for 180℃~210℃ .
  • Making for smoother 3D printing, and fewer extruder nozzle problems.
  • Used with Afinia, Flashforge, Reprap, MakerBot Replicator 1 and Replicator 2X, UP!, PrintrBot, MakerGear, Solidoodle, Ultimaker, and many other 3D printers.
  • Produces excellent 3D printing results.

Visit The Website For More Information…

HICTOP 3D Printer PLA Filament 1.75mm Dimensional Accuracy +/- 0.05mm 1kg Spool (Blue)

Welcome to HICTOP 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • • 1 KG (approximately 2.20 lbs) Spool
  • • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
  • • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″
  • • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant

Detailed Information available on our Homepage…

HICTOP 1.75mm PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm(Red)

Welcome to HICTOP 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • • 1 KG (approximately 2.20 lbs) Spool
  • • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
  • • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Click Here If You Need More Detailed Info…