Gwisdom CR10 Hotend, Upgraded MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality CR-10, CR-10S, S4, S5

Features:

– 100% creality upgrade and high quality material, fine workmanship and good performance.
– 3D printer accessories: Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
– MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.
– Suits for the filament with diameter 1.75mm, 0.4mm output diameter nozzle.

Spec:

– Installation type: External thread connection
– Application: Creality 3D printers CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm

Included:

1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1 x CR-10 0.4mm Nozzle
2 x CR-10 Cooling Fans
1x Fan cover
1x Aviation connector
1x Nozzle kit-4PCS 0.4mm(BONUS)

Note:

1.Please put TMC2130 drivers in the correct direction on the board when installing.
2.Due to light and screen difference, the color may be slightly different from the pictures.
3.Please allow 1-5mm deviation due to manual measurement.

Product Features

  • 100% original and high quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W
  • Gwisdom EU is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.

Click Here If You Need More Detailed Info…

3D Printer Upgraded Replacement Aluminum MK8 Extruder Drive Feed for CR-10, 10S

Features: 

Material: Aluminum 

Package Included: 

*Mounting screws 

*Aluminum MK8 ‘Extruder’ frame, with bored intake hole. 

*Bushing 

*Spring 

*Brass ‘extruder’ drive gear 

*35 mm long teflon intake guide. (keeps filament away from Z-screw rod) 

*Special Bowden tube fitting (improved over stock). 

For all 1.75 mm filament

Product Features

  • Material: Aluminum
  • Replacement: MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.
  • Upgraded Replacement Aluminum MK8 Extruder Drive Feed for CR-10, 10S S4 S5, it is stable and durable.
  • Easy To Install: All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal

Click Here For More Information

WINSINN Stainless Steel Nozzle 0.4mm MK8 CR10 For 3D Printer Creality CR-10 CR10 Ender 3 5 0.25mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Extruder Print Head (Pack of 20Pcs)


►For Creality CR-10 Reprap Makerbot Extruder Hotend

►Material: High quality Stainless steel

►Nozzle size: 0.25mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm

►For 1.75mm Filament

►Thread: M6

►Nozzle Ensure Concentricity and Roundness.

———————————————————————————————————————

Package include:
►10 x Stainless steel 0.4mm Nozzle
►2 x Stainless steel 0.25mm Nozzle
►2 x Stainless steel 0.3mm Nozzle
►2 x Stainless steel 0.5mm Nozzle
►2 x Stainless steel 0.6mm Nozzle
►2 x Stainless steel 0.8mm Nozzle

———————————————————————————————————————

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ✔️Material: High Quality Stainless steel, Ensure The Best Quality!
  • ✔️Nozzle Ensure Concentricity and Roundness.
  • ✔️For Creality CR-10 Reprap Makerbot Extruder Hotend
  • ✔️Nozzle: 1.75MM Filament 0.25mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
  • ✔️Made by WINSINN

Detailed Information available on our Homepage…

Zeelo Ender 3 Extruder, CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality ENDER3, CR-10, CR-10S, CR-10 S4, CR-10 S5

NOTE:

This extruder block fits perfectly on CR-10 and Ender 3 series 3d printers and most bowden extrusion 3d printers.

Stepper motor is ONLY for reference ,NOT included in package.

Features:

Original Upgrade Replacement for Creality CR10 and Ender 3 Series:CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus,;

Ender 3.This durable aluminum extruder frame works more stable than plastic parts.

Bowden Extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,

Flsun i3,MP Select and other bowden extrusion 3d printers as well.

Direct Extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some screws replacements.

Recommend filament materials:PLA/ABS/Wood/TPU/PTEG,40 Teeth drive gear moves the 1.75mm filament very smoothy.

Quality Warrenty:For 18 months after the date of purchase,we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.

Specifications:

Material:Aluminum Alloy,Stainless steel;

Special bowden tube fitting:PC4-M6;Fits for ID:2mm OD:4mm Tube;

Brass Drive Gear:40 Teeth, inner diameter:5mm ,outer diameter:11mm,height:11mm ;

Groove Bearing:624U ,groove diameter:11mm ,outer diameter:13mm ;

Package List:

1xExtruder frame block [Right Hand]

1xMounting screws set

1xStepper motor mounting bracket

1xPC4-M6 Bowden tube fitting

Product Features

  • Stability and durability— DIY kit, you need to assemble it yourself. Our kit includes all the necessary screws and parts needed to replace the old raw weak extruder directly. Suitable for 1.75mm long 3D printer MK8 Bowden extruder rack
  • Advantages of Metal Extruder — Better pressure can be pushed into the printer nozzle to improve the performance of the printer. Our extruder kit has an adjustable bolt so that you can adjust the pressure of the extruder gear as needed
  • Easy to install— all you have to do is remove the original Creality extruder and screw from the new “metal extruder” and get ready to start printing
  • Upgraded 3D Printer Extruder Block — made of aluminum alloy, full metal, high quality and durable, able to improve the performance of the original printer
  • Wide Compatibility — This aluminium actuator is good replacement of original acrylic parts for Creality 3D printer cr-10 series, cr-10 S4, cr-10 S5, cr-10 Mini, cr-10 s, cr-10 Plus

Visit The Website For More Information…