CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10

Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only suitable for 3D printer using indoors Attention: Small parts, keep away from children Package including: 15PCS x 2mm heating block cotton 1PCS x6mm Kapton Tape WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Product Features

  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape

Visit The Website For More Information…

29 Pieces 3D Printer Accessories, Brass Extruder Nozzle, 1.75 mm Extruder Tube, Cleaning kit, Heating Block, Heating Block Cotton and Polyimide High Temp Tape for MK8 Makerbot


5 Various size brass nozzles:
The 3D printer accessories have 5 sizes, containing 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm and 0.4 mm, meet your printing needs, distinct marks on it so that you can distinguish them easily.

Adhesive tapes:
The 3D printer tools have 3 sizes, strong adhesive ability and heat resistant and width of 3 tapes are 3 mm, 5 mm and 10 mm respectively.

Specifications:
Brass nozzle:
Color: gold
Material: brass
Length: 13 mm
Input diameter: 1.75 mm
Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm

Drill kit:
Material: stainless steel
Bit diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm

Extruder tube:
Material: stainless steel
Outer thread: M6
Nozzle throat inner diameter: 4 mm
Pipe inner core diameter : 2 mm
Length: 30 mm
Filament diameter: 1.75 mm

Aluminum heater block:
Material: aluminum
Dimensions: 20 x 20 x 10 mm (LWH)
Inner hole for set screw: M6 and M3

Heating block cotton:
Material: cotton
Size: 20 x 70 x 3 mm (LWH)

Polyimide film adhesive tape:
Thickness: 0.055 mm
Length: 33 m/ 1 pc
Width: 3 mm, 6 mm and 10 mm
Temperature resistance: 260 – 280°C (260°C for long period usage and 280°C for short period)

Package includes:
6 x Brass extruder nozzle print heads in 5 sizes
5 x Drill bits in 5 sizes with a needle bottle
5 x Extruder M6 tube (30 mm)
5 x Aluminum heater block
5 x Heating block cotton
3 x Polyimide film adhesive tape in 3 sizes

Attention:
Small parts, please keep away from children.
Please note that the mention of any related model designation above is only for purposes of demonstrating compatibility.

Product Features

  • 5 Various size brass nozzles: comes with 6 pcs brass nozzle in 5 different sizes, containing 1 piece of 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm and 2 pieces 0.4 mm, distinct marks on it and you can distinguish them easily
  • Quality 30 mm tube: the barrel tubes are made of quality stainless steel with PTFE inner core, durable, corrosion and heat resistance, reduce printing friction and ensure long time of usage
  • Leakage proof: flat contact surface of the brass nozzle, tight and smooth fittings of stainless steel barrel both can prevent material leakage
  • Heat resistant adhesive tapes: come with 3 adhesive tapes in 3 various size, made of quality silicone and polyimide, strong adhesive ability and heat resistant; The width of 3 tapes are 3 mm, 6 mm and 10 mm respectively
  • Application: suitable for MK8 1.75mm ABS PLA Printers, as Anet A8 Creality CR-10 CR-10S S4 S5 and so on

Detailed Information available on our Homepage…

UEETEK 10pcs Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Description

This item is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use. It is used for 3D printer nozzle keeping warm. It is with super good heat insulation for better printing effect. You can design a suitable size to make a hole of the heating block cotton.

Features

– Color: Yellow.
– Material: Ceramic fiber.
– Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).
– Can work for a long time in a high temperature below 300 degrees.
– Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
– Resistance to thermal shock, low thermal conductivity and thermal capacity.
– Perfect for keeping 3D printer nozzle warm and bringing better printing effect.

Package Including
10 x Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Product Features

  • Can work for a long time in a high temperature below 300 degrees.
  • Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
  • Resistance to thermal shock, low thermal conductivity and thermal capacity.
  • Perfect for keeping 3D printer nozzle warm and bringing better printing effect.
  • Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).

Detailed Information available on our Homepage…

UEETEK 20pcs Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Description

This item is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use. It is used for 3D printer nozzle keeping warm. It is with super good heat insulation for better printing effect. You can design a suitable size to make a hole of the heating block cotton.

Features

– Color: Yellow.
– Material: Ceramic fiber.
– Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).
– Can work for a long time in a high temperature below 300 degrees.
– Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
– Resistance to thermal shock, low thermal conductivity and thermal capacity.
– Perfect for keeping 3D printer nozzle warm and bringing better printing effect.

Package Including
20 x Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Product Features

  • Can work for a long time in a high temperature below 300 degrees.
  • Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
  • Resistance to thermal shock, low thermal conductivity and thermal capacity.
  • Perfect for keeping 3D printer nozzle warm and bringing better printing effect.
  • Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).

Visit The Website For More Information…