Length: 1 meter
inner hole size: 2mm
outer diameter size: 4mm
Color: Milky white
Temperature: -190 degree to 280 degree
Nozzle Precision: 0.4mm
Screw Thread: M6
Input Diameter: 1.75mm
Type : Nozzle Throat
Outer Thread: M6
Inner Diameter: 2mm
Filament Diameter: 1.75mm
Material: Stainless Steel
Aluminum Heater Block
Heater block Dimension: 20*20*10 mm
Net weight: 8.6
Inner hole for set screw: M6
Heater Mounting Hole: 6mm diameter
1 x 1M Teflon Tube
5 x MK8-0.4mm Brass Nozzle
5 x MK8-L30MM Extruder 1.75mm Tube
5 x MK8-Aluminum Heater Block
2 x Hex Key Wrenches
- Aluminum Heater Block – Dimensions: 20 x 20 x 10mm(L x W x H); Heater Mounting Hole: 6mm diameter; Thermocouple Mounting Holes: 3mm diameter; Material: Aluminum
- Throat Tube Outer Thread: M6; Length – 30mm; Inner Diameter – 2mm; Filament Diameter: 1.75mm; Material – Stainless Steel
- 0.4mm Extruder Brass Nozzle Print Head: Input Diameter: 1.75mm; Output Diameter: 0.4mm; Color – Golden; Material – copper (brass)
- 1.75mm PTFE Teflon Tube Outside Diameter: 4mm; Inside Diameter: 2mm; Material: PTFE (Poly Tetra Fluoro Ethylene)
- Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
Detailed Information available on our Homepage…
Power input: 12V~40V
Support motor drive quantity: 5
Support motor drive type: A4988, DEV8825,
Support control panel: LCD2004, LCD12864, LCD1602, touch screen
Compile environment: Arduino IDE
Screw size: 94.56*94.56
Product size: 100*100mm
Package size:98 x 70 x 25mm/3.86 x 2.76 x 0.98in
Poly Bag Package
1 x KFB2.0 Master Board
1.Do not charge the main board to connect or replace the interface operation of each module (except SD, USB)
2.Please note the positive and negative poles of the connection
3.Please check before connecting 3 wires to make sure that the interface is correct so as not to damage the main board
4.Do not touch the motherboard with wet hands
5.In case of emergency, please press the RESET reset button on the main board or disconnect the power supply in time.
- 1.Power buck chip uses XL1509 chip with high efficiency, good stability, short-circuit protection function.
- 2.USB serial chip uses CH340T chip, the largest 2Mbps, communication stability, no packet loss, to solve the streamlined version of the Windows driver can not install the problem, support for a full range of Windows, MAC, Linux operating system.
- 3.The processor adopts tamega2560 chip, and the 54 outputs meet the output interfaces.
- 4.The hot bed MOS tube uses a F8736 chip, with maximum 18A current, without heating and ulfimaker, with the same solution using the Wj500V type wiring terminal,Larger size, easier wiring, and strong durability.
- 5.Tantalum capacitor filter, acquisition temperature, anti-interference, more accurate.
Click Here For More Information
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Sharp accessories, please keep them away from children.
Stainless steel Printer Nozzle:
Material: stainless steel
Compatibility: Anet A8, Creality CR-10, Tevo Tarantula, E3D makerbot, duplicator, prusa i3 and reprap printer
Out Thread: M6
Filament Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm.
3D Printer Nozzle Cleaning Kit:
Material: Stainless steel
Bit diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm.
Free box: Convenient for collecting the cleaning kit
1 x 0.2mm cleaning needles
1 x 0.3mm cleaning needles
1 x 0.4mm cleaning needles
1x 0.5mm cleaning needles
1 x 0.6mm cleaning needles
1 x 0.8mm cleaning needles
1 x 0.2mm Printer Extruder Nozzle
1 x 0.3mm Printer Extruder Nozzle
2 x 0.4mm Printer Extruder Nozzle
1x 0.5mm Printer Extruder Nozzle
1 x 0.6mm Printer Extruder Nozzle
1 x 0.8mm Printer Extruder Nozzle
2 x tweezers
1 x Simple spanner
1 x 3 in 1 screwdriver (1 Handle with 2 Heads)
1 x storage box
- Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm).
- Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
- COMPATIBILITY: This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, E3D makerbot, duplicator, prusa i3 and reprap printer.
- MATERIAL AND SIZE: These printers nozzles are made of stainless steel, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm.
- NOZZLE CLEANING NEEDLES: 6 pieces cleaning needles have 6 different size: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, suitable for cleaning most of your 3D Printer nozzles.
Click Here If You Need More Detailed Info…
ELEGOO NEPTUNE is our very first FDM 3D printer which comes semi-assembled and 3 steps are all it takes to build up.
NEPTUNE uses the full metal structure design and Mean Well Power Supply to ensure the solid machine quality and safe printing experience.
Print Technology: FDM (Fused Deposition Modeling)
Positioning Precision：X/Y 0.0125mm Z 0.0002mm
Nozzle quantity ：Single Nozzle
Build Speed：20-100mm/s（45-50mm/s recommended）
Material Compatibility：PLA, ABS, HIPS, TPU, Wooden, etc.
Ambient Operating Temperature：15℃-40℃
Nozzle Temperature：as high as 260℃
Heatbed Temperature：as high as 120℃
Supported System：Windows MacOS Linux
Slicing Software：Cura Simplify3D Repetier-HOST
Supported File Types: STL OBJ DAE AMF JPJ
Exported File Types：Gcode
Printing Method： Offline printing with SD Card and Online Printing with USB cable
Input Voltage: 110V/220V 50/60HZ
Product Dimensions：40L*40.3W*44.5H CM (15.75*15.87*17.54 IN)
Operation Panel: 2.8 inch Touch Screen
ELEGOO NEPTUNE 3D printer
Filament Rack 1pc
Filament Rack Support 1pc
Backup Nozzle 1pc
Steel Needle(for cleaning nozzle) 1pc
Hexagon socket screws（M4*6）4pcs
Hexagon socket screws （M3*6）6pcs
Hexagon socket screws （M3*12）1pc
M4 Shim 4pcs
USB Cable 1pc
Adapter Cable 1pc
SD Card Reader 1pc
SD Card 1pc
PLA Filament 1pc
Tool kit 1pc
Filament Detection Switch 1pc
Single-pass Copper Cylinder 1pc
Glue Stick 1pc
Zip Ties 1pc
Warranty: NEPTUNE provides lifetime technical support and 1-year warranty for the whole printer (6-month warranty for the nozzle, mainboard, and heatbed)
- 【Works Out of the Box】 3 steps to set up the whole printer with semi-assembly components and within 5 minutes you can start your first printing. Comes with detailed paper manual and e-manual downable from https://www.elegoo.com/download/
- 【Accurate and Stable Extrusion】Titan extruder offers precise ecxtrusion for your 3D printing with its solid filament drive and overall mechanical design. Compatible with most filaments like PLA, ABS, TPU, etc.
- 【Sillicon Carbide Platform】Carbide glass build platform with excellent acdhesion and easy to remove model after printing. Durable quality for long term use. To guarantee the quality of our printers, each 3D printer would be tested before shipping. Therefore there may exist some marks on the platform, but it will not affect the printing. Please use soft cloth with alcohol to clean it.
- 【Safe and Secure】NEPTUNE uses MEAN WELL LRS-350 350W single output switching power supply, which has the complete protection functions and is complied with the international safety regulations giving you a worriless and safe printing experience.
- 【Filament Detection and Resume Printing】Comes with a filament detection switch, NEPTUNE can always find out the filament outage and pause the print allowing you to replace the filaments. Auto-resume feature will continue printing once the power is back on again just in case of power outage.
Click Here For More Information