SOOWAY 3D Printer Nozzle and Cleaning Kit, 10 Pack 0.4 mm MK8 Nozzles, 10 Pack 0.4 mm Needles and 1 Pack Tweezers Tool kit, Stainless Steel Nozzle Cleaning Tool Kit

Specification:
Color: gold
Material: brass
Screw thread: M6
Input diameter: 1.75 mm
Output diameter: 0.4 mm
Quantity: 10 pieces in total
Package includes:
10 x 0.4 mm nozzle print head
10 x 0.4 mm needles in bottle
1 x Tweezer Warm notes: Small parts, please keep away from children.

Product Features

  • Package includes 10 pieces of 0.4 mm nozzle cleaning needles packed in one container, 1 piece pointed tweezers and 10 pieces of 0.4 mm MK8 nozzles
  • The input diameter of 3D printer nozzle is 1.75 mm, output diameter is 0.4 mm,compatible with 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer
  • 3D printer tweezer are good for nozzle maintenance and cleaning excess support material; it is anti-static, non-magnetic curved precision tweezer
  • 10 pieces of 0.4 mm diameter flexible stainless steel needles which is good for gentle maintenance of your nozzles and hard-to-reach places like the feeding gears
  • The 3D printer nozzle and cleaning kit is a long-lasting kit for several purposes; Remove excess plastic and clear jams with high precision, also good for general maintenance of the heat sink section

Detailed Information available on our Homepage…

PoPprint 3D Printer Nozzle Cleaning Kit Stainless Steel Nozzle Cleaning Tool 0.4 mm(12Pcs)

This set includes: 12 pieces of 0.4 mm stainless steel needle (color: Silvery) Tweezers with curved precision; 1 piece of clean plastic box; You can stock them easier and safer 100% satisfaction guarantee, complete service is offered! Click on Add to Cart above

Product Features

  • Good material: made of stainless steel, with good flexibility, neither rusting nor breaking.
  • Completely equipped: equipped with an ergonomic angle head tweezer for easier use.
  • Ample quantity: 12pcs, enough quantity to be long enough to use.
  • Intimate packaging: It is easy to store and keep with a round tube device.

Click Here If You Need More Detailed Info…

HWA KUNG 3D Printer Nozzle Cleaning Tool Kit – 0.4mm 0.35mm Needles + Removal Tool Enhanced Version with Tweezers for 3D Printer (Set of 13)

HWA KUNGProduced The perfect combination of 3D printer cleaning and removal tools.
Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc.

Product Specifications

0.4mm Cleaning Needles:

Bit diameter: 0.4mm
The bit length: 40mm
copper Handle length: 35mm
Total length: 75mm
Material: Stainless steel
0.35mm Cleaning Needles:

Bit diameter: 0.35mm
The bit length: 40mm
Stainless Steel Handle length: 30mm
Total length: 70mm
Material: Stainless steel

Tweezer:
Type: Anti-Static,Non-Magnetic Curved Precision Tweezer
Tweezer length: 120mm
weight: 15.8g
color: Black

Removal Tool:
Long Handle Size: Approx. 11cm / 4.33inch
Long Blade Length: Approx. 11.5cm / 4.52inch
Short Handle Size: Approx. 9cm / 3.54inch
Short Blade Length: Approx. 7.5cm / 2.95inch
Material: Stainless steel with Natural wooden handle
Color: Brown

Package includes:
5 x 0.4mm Cleaning Needles
5 x 0.35mm Cleaning Needles
1 x Curved Precision Tweezer
1 x Short Removal Tool
1 x Long Removal Tool
1 x plastic bottle

Product Features

  • The perfect combination of 3D printer cleaning and removal tools.Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc.
  • Total 13pcs include: 5pcs 0.4mm cleaning needles, 5pcs 0.35mm cleaning needles, 1pcs precise tweezers, 2pcs Removal Tool, 1pc plastic bottle.
  • nozzle cleaning needles is flexible, won’t break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly.
  • High Quality Tweezers are great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament).
  • Removal Tool use Rounded edge is safer and less likely to tear print bed tape.Excellent flexible flat top, stainless steel, break resistance.

Click Here If You Need More Detailed Info…

14 Sets 3D Printer Nozzle Cleaning & Removal Tools Kit, SourceTon 2 PCS Palette Knife, 10 PCS Needles (5x 0.4mm, 5x 0.3mm) and 2 PCS Tweezers Tools Kit

Directions for Use:

Step 1: To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle.
Step 2: Use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print.
Step 3: If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat.
Step 4:If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool.
Step 5: If the nozzles blocked, check the size of output diameter and choose the correct needle. Then, clean the nozzles by cleaning needles and tweezers.

Product Features

  • VARIOUS SIZE – 10 pieces cleaning needles in 2 different size 0.3 mm, 0.4 mm, suitable for cleaning most of your 3D Printer nozzles.
  • PREMIUM QUALITY- Both needles and tweezers are made of high quality stainless steel, flexible, sturdy and durable. The palette knife have a plastic handle and a sharp & hardened blade.
  • STYLISH AND USEFUL- The spatulas have a brown ergonomic plastic comfort grip, one of them has a short beveled front edge, another one has a flat long front edge.
  • WIDE COMPATIBLE- Compatible with most of 3D printers extruder nozzles, such as E3D Makerbot, MK8 Makerbot RepRap and so on.
  • VALUE PACKAGE- The package includes: 2 x Palette Knife, 10 x Needles (5x 0.4mm, 5x 0.3mm) and 2 x Tweezers.

Detailed Information available on our Homepage…