Screw Spacing: 2mm
Phase: 2 Phase
Voltage: 2.72 V
Current: 1.7 A / Phase
Resistance: 1.6 ± 10% Ω / Phase
Inductance: 2 ± 20% mH / Phase
Holding Torque: 36 N. cm
Insulation Class: B
Step Angle: 1.8 ± 5% / Step
Item Size: 42 * 42 * 40mm
1 * Screw
1 * Brass Screw Nut(with mounting screws)
1 * Coupler(with mounting screws)
1 * Cable
1 * Step Motor
2 * Acrylic Plate
Please check the size and the electric parameter of the parts carefully before you place an order.
- Dual Z-axis kit for upgrading your 3D printer.
- Screw length 375mm, 8mm diameter, 2mm screw spacing.
- 42 step motor with cable.
- Comes with a brass screw nut, coupler and 2 * acrylic plates.
- Suitable for 3D Printer
Visit The Website For More Information…
We are focusing on improving the quality of our products, if you are satisfied, please take a little time to write a short comment below our product to share your happy feeling; if you have any problem, please don’t hesitate to write an e-mail to us, we are always here to help you, thank you!
- Length: 300mm; Lead of thread:8mm
- Compatible with Prusa i3 3D Printer
- Screw spacing: 2mm
- Lead of thread:8mm
- Package Contents: 1x 300mm lead screw and 1x Brass Nut
Detailed Information available on our Homepage…
12V/40W heater, the temperature can up to 280℃ (Long-term temperature: 240℃/ short-term temperature: 280℃)
12V high speed fan with shroud
1M long PTFE/teflon tubing 4mm OD and 2mm ID
PC4-01 Tube Fitting
Type: Nozzle Throat
Outer Thread: M6 M7
Nozzle Throat Outer Diameter: 6mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Filament Diameter: 1.75mm
Material: Stainless Steel
Type: Extruder Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm
Note: Compatible with all 1.75mm V6 Makerbot 3D printer.
1 x All Metal V6 J-Head Hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Nozzles Throat
Before installation, it must be printed the support for the thrust fork that will be fixed on the machine body, and the support bracket of the extruder and the cooling fan of the extruded material. Note: if you only print PLA, you can also use it for the support, if you also print in ABS, then use the latter, because the heat of the plate tends to very soften the PLA with melt results.
If your printer is Anet A8, please note: the fan wire is short, so it must be lengthened. The 2-pin JST connector of the thermocouple is not suitable, you’ll have to replace it with a 3-pin JST or a patchwork with the original one (the polarity is doesn’t matter).
- V6 all-metal printer head, 100% brand new and high quality.
- 12V/40W heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280℃, 12V high speed fan, lose heat quickly.
- Compatible with all 1.75mm V6 Makerbot 3D printer.
- Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
- Package Include: All Metal V6 J-Head Hotend Full Kit + 10 Pcs Extruder Brass Nozzle Print Head + 5 Pcs Stainless Steel Nozzle Throat
Visit The Website For More Information…
5pcs E3D-V5 V6 Nozzle M6 Threaded Brass for 1.75mm Filament 3D Printers Parts
5pcs E3D-V5 V6 Nozzle Part Copper 1.75mm Filament M6 Threaded Brass 3D Printers Parts
1. Smooth, bright ,mark size, it is easy to distinguish.
2. Smooth inner wall without burr, viscosity coefficient is smaller, more smooth side, reduce the resistance.
3. Smooth chamfering, reduce the resistance of filament, avoid to clogging and jamming.
Size: approx. 12mm*7mm*7mm/0.47*0.27*0.27”
Model: E3D-V5 V6
Installation type: M6 external thread connection
Nozzle precision: 0.3mm/1.75mm
Application: V5 V6 j-head print head
Scope of application: 3D printer
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
5 x Nozzles
- 1. Smooth, bright ,mark size, it is easy to distinguish.
- 2. Smooth inner wall without burr, viscosity coefficient is smaller, more smooth side, reduce the resistance.
- 3. Smooth chamfering, reduce the resistance of filament, avoid to clogging and jamming.
- Size: approx. 12mm*7mm*7mm/0.47*0.27*0.27”
- Application: V5 V6 j-head print head
Click Here For More Information