3D Printer Parts and Accessories, FYSETC 3D Printer Stepper Motor Parallel Module with W Cable for Double Z Axis Dual Z Motors Reprap Prusa Lerdge 3D Printer Board – Pack of 2

Package includes:
2*Stepper Motor parallel module;
2 Pcs cables

Product Features

  • Special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor;
  • Comes with a 4 pin cable (4 inch), easy to connect;
  • Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly);
  • After sales-guarantee: we are responsable for our products, need more further please feel free to email us, we will try our best to help you.

Visit The Website For More Information…

Richer-R 3D Printer CNC Module Kit, ASHATA CNC Shield Board Stepper Motor Driver with Aluminum Cooler+ Nema 17 Stepper Motor

This is a professional sensor kit for UNO R3. New and upgraded, we provide various components or sensor module, with which you will find it easy to complete your experiments or learning. All these are packaged in a portable box, easy to carry and storage.

Connection Instruction:
Red Wire – VCC (Slope +)
Black Wire – GND (Slope -)
Green Wire – SIGNAL (Slope in S)
Warm tips: Generally, the system must have at least three machines.

CNC Shield Board
Compatible Version
CH340G Shield 3.0
Compatible Stepper Motor Drive A4988 / DRV8825
Working Voltage 12-36V DC
DRV8825 Stepper Motor Drive (NOT official version)
Max. Working Current 2.5A
For Nema 17 Stepper Motor
Model 17HD48002H-22B
Step Angle 1.8 Degrees
Torque 59Ncm (84 oz.in)
Rated Current 1.7A
Frame Size 41 x 41mm
Length 47mm
Axle Diameter 5mm
Axle Length 22mm
Package Size Approx. 180 x 100 x 110mm / 7.1 x 3.9 x 4.3in
Weight Approx Package. 1615g

Package List:
1 x CNC Shield Board
1 x For Kuman UNO R3
4 x DRV8825 Stepper Motor Drive
4 x Aluminum Cooler
3 x For Nema 17 Stepper Motor
3 x Mounting Base for Nema 17 Stepper Motor
12 x M3 Screws
3 x Mechanical Switch
3 x 3pin Cable (70cm)
1 x USB Cable for R3 Board (1.5m)

Product Features

  • These components can be used in a wide range of application, simple and the service life is long.
  • Multiple types of modules or components in this set, which will meet your different needs of learning or experiment.
  • High quality stepper motor drive, running within 2.5A current (Maximum), and compatible with for Arduino software and hardware. (NOT official version of motor drive.)
  • CNC shield board is suitable for CH340G Shield 3.0 version for Arduino, and compatible for GRBL 0.9.
  • Professional module board for Kuman UNO R3, fit well for Arduino, easy to install.

Click Here If You Need More Detailed Info…

TECNOIOT 3D Printer Kit for Arduino Mega 2560 R3 Development Board + RAMPAS 1.4 Controller + 5pcs DRV8825 Stepper Motor Module + 6pcs Endstop

Mega 2560: 

La junta de Mega 2560 es un microcontrolador basado en el Atmega2560. Tiene 54 pines digitales de entrada/salida (de los cuales 14 pueden usarse como salidas PWm), 16 entradas analógicas, 4 UART (puertos de serie de hardware), un oscilador de cristal de 16 Mhz, conexión USB, una entrada de alimentación, calentador ICSP y botón de reseteado.

Placa controladora RAMPS 1.4:
Salida de calentador/ventilador y tres circuitos termistores MOSFET.
Seguridad adicional FUSION 5 A y protección de componentes.
Fusible adicional de control de calefacción de 11 A.
Adecuado para placa de controlador paso a paso 5 Pololu.
Entrada de pin de placa de Pololu, fácil de reemplazar y quitar.
Pines I2C y SPI para uso prolongado; todos los MOSFET a pines PWM para proporcionar versatilidad.
Salida de corriente nominal: 3 A, LED indica cuando funciona el calentador.
DRV8825 Stepper Motor Driver: 
1)*Suitable for driving below 8.2V ~ 45V 2.5A stepper motor  
2)*Six different stepping resolutions: full, half, 1 / 4,1 / 8,1 / 16,1 / 32.  
3)*A simple steps and direction control interface.  
4)*Automatic current decay mode detection / selection.  
5)*Thermal shutdown circuit, undervoltage lockout, crossover current protection.  
6)*Ground short-circuit protection and load short-circuit protection.  

Línea roja conecta VCC (rampas de +)
Conecta el cable GND negro (rampas de -)
Señal de conexión de línea verde (rampas en s)

Package Contains:

1pc x MEGA 2560 R3
1pc x RAMPS 1.4 Control Panel
5pcs x DRV8825 Stepper Motor Driver Module
6pcs x Mechanical Endstop

Product Features

  • 【3D Printer】 All actions such as calibration, axis movements can be performed simply using the rotary encoder in the intelligent controller. Print your 3D designs without a PC, only with a G-Code design stored on the SD card
  • 【Ramps1.4】 RAMPS interconnects a Mega Arduino compatible with the powerful MEGA platform supported by Arduino and has plenty of room for expansion
  • 【MEGA2560】 The Mega 2560 is compatible with most of the shields designed for the Arduino Duemilanove, or Diecimilaa4988 is a complete Microstepping motor controller with integrated translator for easy handling. Mega 2560 R3, with this product, you can use the entire open source Arduino platform to create or learn interactive objects.
  • 【DRV8825】 DRV8825 is a complete microstepping motor controller with integrated translator for easy operation.DRV8825 is the upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT

Click Here If You Need More Detailed Info…

KKmoon Anet A1284-Base Control Board Mother Board Mainboard for Anet A8 DIY Self Assembly 3D Desktop Printer RepRap Prusa i3 Kit

Highly-integrated mainboard fits for Anet A8 3D printer, easy for connection and operation.
Upgrading circuit design offers it stable performance.
Adopts for MOS with high-perforamnce as a driver, great heat dissipation effect.
12V power supply input receivable, with USB port.
Support the connection for Ramps1.4, 2004 LCD and 12864 LCD control board.

Brand: Anet
Suitable for: Anet A8 3D Printer
Voltage Input: 12V
Mainboard Size: 10 * 9.5 * 2cm / 3.9 * 3.7 * 0.8in    
Mainboard Weight: 63g / 2.2oz
Package Size: 12 * 11 * 3cm / 4.7 * 4.3 * 1.2in
Package Weight: 80g / 2.8oz

Package List:
1 * Mainboard

Please pay more attention to the circuit diagram showed in the picture before mount it.

Product Features

  • Highly-integrated mainboard fits for Anet A8 3D printer.
  • Upgrading circuit design.
  • Adopts for MOS with high-perforamnce as a driver.
  • 12V power supply input receivable, with USB port.
  • Support the connection for Ramps1.4, 2004 LCD and 12864 LCD control board.

Click Here If You Need More Detailed Info…