KINGPRINT 5Pcs 3D V6 Aluminum Heat Block for M6 Threaded 3D Printer Extruder

Specifications:

Plate thickness: 1.0mm-10mm
Material Capabilities: Aluminum
output power: 15w(Max)
Dimension:15*15*10mm
Suitable for Filament : both 1.75mm and 3.0mm M6 Nozzle
Size: 16*16*12MM

Package Included:

5*Aluminum Heater Block

Product Features

  • Made of solid aluminum material, durable in use
  • It works perfect with nozzle and nozzle throat
  • Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
  • Inner hole for heater tube: 6mm
  • Inner hole for thermocouple/thermistor: 3mm

Visit The Website For More Information…

CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10

Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only suitable for 3D printer using indoors Attention: Small parts, keep away from children Package including: 15PCS x 2mm heating block cotton 1PCS x6mm Kapton Tape WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Product Features

  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape

Visit The Website For More Information…

29 Pieces 3D Printer Accessories, Brass Extruder Nozzle, 1.75 mm Extruder Tube, Cleaning kit, Heating Block, Heating Block Cotton and Polyimide High Temp Tape for MK8 Makerbot


5 Various size brass nozzles:
The 3D printer accessories have 5 sizes, containing 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm and 0.4 mm, meet your printing needs, distinct marks on it so that you can distinguish them easily.

Adhesive tapes:
The 3D printer tools have 3 sizes, strong adhesive ability and heat resistant and width of 3 tapes are 3 mm, 5 mm and 10 mm respectively.

Specifications:
Brass nozzle:
Color: gold
Material: brass
Length: 13 mm
Input diameter: 1.75 mm
Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm

Drill kit:
Material: stainless steel
Bit diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm

Extruder tube:
Material: stainless steel
Outer thread: M6
Nozzle throat inner diameter: 4 mm
Pipe inner core diameter : 2 mm
Length: 30 mm
Filament diameter: 1.75 mm

Aluminum heater block:
Material: aluminum
Dimensions: 20 x 20 x 10 mm (LWH)
Inner hole for set screw: M6 and M3

Heating block cotton:
Material: cotton
Size: 20 x 70 x 3 mm (LWH)

Polyimide film adhesive tape:
Thickness: 0.055 mm
Length: 33 m/ 1 pc
Width: 3 mm, 6 mm and 10 mm
Temperature resistance: 260 – 280°C (260°C for long period usage and 280°C for short period)

Package includes:
6 x Brass extruder nozzle print heads in 5 sizes
5 x Drill bits in 5 sizes with a needle bottle
5 x Extruder M6 tube (30 mm)
5 x Aluminum heater block
5 x Heating block cotton
3 x Polyimide film adhesive tape in 3 sizes

Attention:
Small parts, please keep away from children.
Please note that the mention of any related model designation above is only for purposes of demonstrating compatibility.

Product Features

  • 5 Various size brass nozzles: comes with 6 pcs brass nozzle in 5 different sizes, containing 1 piece of 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm and 2 pieces 0.4 mm, distinct marks on it and you can distinguish them easily
  • Quality 30 mm tube: the barrel tubes are made of quality stainless steel with PTFE inner core, durable, corrosion and heat resistance, reduce printing friction and ensure long time of usage
  • Leakage proof: flat contact surface of the brass nozzle, tight and smooth fittings of stainless steel barrel both can prevent material leakage
  • Heat resistant adhesive tapes: come with 3 adhesive tapes in 3 various size, made of quality silicone and polyimide, strong adhesive ability and heat resistant; The width of 3 tapes are 3 mm, 6 mm and 10 mm respectively
  • Application: suitable for MK8 1.75mm ABS PLA Printers, as Anet A8 Creality CR-10 CR-10S S4 S5 and so on

Detailed Information available on our Homepage…

Focus 5Pcs Aluminum Heater Block Heating Printing Head Assembly for Makerbot MK7 MK8 3D Printer Extruder Accessory

Features:
Made of solid aluminum material, durable in use.
It works perfect with nozzle and nozzle throat.
Heating rod mounting hole diameter is 6mm, electric thermocouple installation hole is M3.
Compact and portable size, easy to install, it is convenient for you.
Suitable for Makerbot printer.
Aluminium heat block for 3D printer, for Makerbot MK7/MK8 extruder.

Specification:
Material: Aluminum.
Dimensions: 20x20x10mm.
Heating rod mounting hole diameter: 6mm.
Fixed screw hole: M3.
Electric thermocouple installation hole: M3.
Fixed screw: M3, inner 6 Angle.
Color: as pictures show.

Package included:
5 * Heater block for 3D printer.

Product Features

  • Printer heater head block for 3D printer, for Makerbot MK7 and MK8 extruder nozzle and nozzle throat
  • Heating head for 3D printer with compact and portable size, easy to install, it is convenient for you
  • Assembly heater for 3D printer heating rod mounting hole diameter is 6mm, electric thermocouple installation hole is M3
  • Heater block for 3D printer can work perfectly with nozzle and nozzle throat, suitable for Makerbot printer
  • 3D printer aluminum heater block is made of solid aluminum material, practical in use, durable for long service life

Detailed Information available on our Homepage…