LABOTA 5 Pieces 0.3 mm Drill Bits for 3D Printer Nozzle Cleaning Kit Stainless Steel Nozzle Cleaning Tool Kit (Silver)

Features:
It is made of stainless steel with good flexibility, not rust or break easily.
The drill bits will clean your printer nozzles very well and make it print better.
Compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.

Enough quantity:
5 Pieces of nozzle drills applicable in your daily life, and they are stored in a box, in case of missing.

Specifications:
Material: stainless steel
Bit diameter: 0.3 mm
The bit length: 5 cm
Total length:, 8 cm
Box length: approx 10 cm; box diameter: approx 12mm

Package included:
5 x Needle drill bits
1 x Plastict box

Notes:
the drill is small and sharp, please keep it in the box after use and keep it away from children to avoid injuries and losses.

Product Features

  • Material: Stainless Steel; not easy to rust or break
  • Compatibility: Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.).
  • Quantity: 5pcs
  • Bit Diameter: 0.3mm; The length of drill: 5cm; The total length: 8cm
  • Function: it can be applied to accurately measure the diameter of nozzle holes, you can use it to clean the small size nozzles and other small parts by this tool kit, such as the feed gear

Click Here If You Need More Detailed Info…

CCTREE 3D Printer Nozzle Cleaning Kit Drill Bits Tool For Makerbot And Creality CR-10 MAKERBOT 10 PCS (0.2-0.6mm)

Size: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm 10Pcs(0.2-0.6mm):2×0.2mm,2×0.3mm,2×0.4mm,2×0.5mm,2×0.6mm Type : Extruder Nozzle Drill With storage box Used for 3D Printer nozzle Tip: Please clear the nozzle when heated to 200 °C while using the drill Package Included: 10pcs x nozzle drill

Product Features

  • Material: Stainless Steel.
  • Size: 0.2mm,0.3mm,0.4mm,0.5mm,0.6mm
  • Used for 3D Printer nozzle

Click Here If You Need More Detailed Info…

Drill Bits for 3D Printer Nozzle Cleaning Kit Pack of 10PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm

Pack of 10 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm

Product Features

  • Pack of 10 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm 1.2mm
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Color is random
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees
  • Any question,pls feel free to contact us.

Click Here If You Need More Detailed Info…

YOTINO 10Pcs Nozzle Cleaning Tool Kit, Print Head Cleaner Drill Bits for 3D Printer Exturder Nozzle Cleaning(0.2mm 0.3mm 0.4mm 0.5mm 0.6m each size 2pcs)

YOTINO 10Pcs Nozzle Cleaning Tool Kit not only for 3D Printer Nozzle, but also for circuit boards, electronics, SMT, mold, hardware processing, telecommunications and other industries
Different colors silicone grip gasket on behalf of different sizes, engraved on the size of the needle punched in the drill bit, easy to distinguish.

Specification:
Material: Tungsten Steel (Drill)+Stainless Steel (Handle)
Bit diameter: 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm
The bit length: 17mm
The length of shank: 22mm
Total length: 39 mm
Color: Random

Package include:
10 x Cleaning Drill bits

Product Features

  • ▶As blocks happen much during printing, and the extruder nozzle must be constantly cleaned to ensure printing runs fluently, but difficult to access inside the nozzle, cleaning drill bits are perfect for helping you to solve the clogging problem
  • ▶Cleaning drill bits needle spiral design, easy to insert the nozzle, clean up the blockage, not easy to damage the nozzle
  • ▶Material: Needle: tungsten steel, needle handle: white steel, high hardness, good toughness; needle length: 37mm, needle diameter: 3mm
  • ▶Note: Do not use drill bits to clean nozzles until they have been heated above 200℃. Pay attention to the angle of the nozzle when using
  • ▶Kit includes: 2 x Cleaning drill bits 0.2mm 0.3mm 0.4mm 0.5mm 0.6m, with a plastic packing box

Click Here If You Need More Detailed Info…