DIY replacement kit universal for damaged 3D printer hot end, special for Anet A2 & A8 printer.
Pre-wired NTC3950 thermistor, 100K ohm, 1.1m in length.
12V 40W 6*20mm cartridge heater.
Aluminum heater block.
0.4mm output nozzle.
6mm diameter external thread extruder throat, 40mm length, suits for 1.75mm filament.
Material: High Temperature Teflon(200℃)
Resistance: at 25°C=100K ohm
Cable Length: Approx. 1.1m
Working Temperature Range: -40℃～+300℃
Material: Stainless Steel & Teflon
Input Diameter: 1.75mm
External Thread Diameter: 6mm
Input Diameter: 1.75mm & 3mm
Output Diameter: 0.4mm
Material: Stainless Steel
Wire Length: Approx. 1m
Dimensions: 2 * 2 * 1cm / 0.8 * 0.8 * 0.4in(LWH)
Item Weight: 8g / 0.3oz
Suits for: Anet A2 & A8 3D Printer
Package Size: 10 * 4 * 3cm / 3.9 * 1.6 * 1.2in
Package Weight: 41g / 1.5oz
1 * Set of Hot End
Please pay attention to the parameter before placing an order.
- DIY replacement kit universal for damaged 3D printer hot end, special for Anet A6 & A3-S printer.
- NTC3950 thermistor, 100K ohm, 1.1m in length.
- 12V 40W 6*20mm cartridge heater.
- 0.4mm output nozzle, aluminum heater block.
- 6mm external thread extruder throat, 40mm, suits for 1.75mm filament.
Cartridge heater widely applied for 3D printer, model heating, hot-box & other heating devices.
Voltage: 12V, power: 40W.
Stainless steel material.
The wire length approx. 1 meter.
The stainless steel part, 6mm diameter, 20mm in length.
Material: Stainless Steel
Wire Length: Approx. 1m / 39.4in
Package Size: 7 * 5 * 2cm / 2.8 * 2 * 0.8in
Package Weight: 17g / 0.6oz
1 * Cartridge Heater
The item only includes the cartridge heater.
- Cartridge heater widely applied for 3D printer, model heating, hot-box & other heating devices.
- Voltage: 12V, power: 40W.
- Stainless steel material.
- The stainless steel part 6mm diameter, 20mm in length.
- The wire length approx. 1 meter.
1. Couple kit: Only 2-in-1 nozzle, two extruder motors which can be used to upgrade different DIY3D printers, such as CR-10, CR-10S, HICTOP, Anet E10, Anet A8, Anycubic 3D printers, etc.
2. Couple Buddy: Half-assembled with all METAL FRAME.
3. Couple M10 / A01 Couple: Self-assembled (DIY) with ALUMINUM FRAME.
4. Couple M20: Half-assembled with all Aluminum FRAME.
Four functions: Mixed color, dual color, graded color and single color.
PLA, ABS, Wood, TPU, PVA, Nylon, HIPS
Nozzle: 0.5mm 2 in 1 out nozzle
Accuracy: 100 microns (0.1 mm)
Speed：Normal: 30mm/s, Max: 60mm/s
Layer Thickness: 0.1-0.3mm (up to you)
Hot End Heater: There are two heaters for different DIY 3D printers: 12V 40W, 24V 60W. (The default one is 24V. Please find another 12V heater in the package.) Temperature: Max 270 degree centigrade
Control board: The kits without control board, please purchase control board which support 2 extruders. MKS V1.3 is recommend. You also can buy our control board from our website.
LCD screen: 2004 LCD Module Control, Interface (The kits without LCD screen, please purchase it separately if needed)
Both open-source and commercial software, such as Cura, Repetier-Host, or Simplify 3D, the Maker Select Plus 3D Printer is compatible with Windows, Mac OS X, and Linux.
What’s in the Box:
Athorbot Couple kits: including one 2-in-1 nozzle, two extruder motors.
CD with Assembly instructions, user manual and warranty card
For CR10, Anet, it requires to order one 2004 LCD Screen and Athorbot Board (12V). Change the heater to 12v kit.
- Multi application: upgrade for all kinds Prusa i3 DIY 3D printer, including CR-10, CR-10S, Anet, Anycubic, Four functions: Mixed color, Dual color, Graded color and Single color.
- Mixed color & Single color: Upload the “Athorbot mix” firmware and it provides different functions to make mixing color by changing the mixing percentage on the LCD screen. Percentage 100 and 0 means single color.
- Dual color: Upload the “Athorbot dual” firmware and it helps you to print samples with two different colors. Single color is also supported by this firmware. Graded color: Upload the “Athorbot mix” firmware and you can print samples with graded color by changing the mixing percentage on the LCD screen.
- NOTE: The Slicing Setting of Athorbot Couple is different from other 3D printer. Please follow the parameter setting in the instructions. If any questions or issues, please feel free to contact our Customer Support Team.
- VIP membership is guaranteed to get plenty of tutorials and 3D printing applications. Free troubleshooting and webinars are available every month. This DIY 3D printer are guaranteed for one year warranty. is 1 year technical support is guaranteed. Quality Assurance/Technical Assistance at athorbot.com| Email at firstname.lastname@example.org | Live chat Skype: ghj205 Mon through Fri 6am – 5pm PST.