PChero 5pcs Aluminum Extruder Hotend Nozzle Throat Heater Block with 10pcs 2mm Thick Heat-Insulated Cotton, for MK7 MK8 Makerbot 3D Printer

The key parts of the 3D printer – Heated aluminum block insulation, the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.

Specification:

Heater block Dimension: 20*20*10 mm, net weight: 7g/pc
Material: Aluminum
Inner hole for set screw: M6 and M3
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Heat insulation cotton Dimension: 72*21*2 mm

Package Included:

5 x Aluminum Heater Block
10 x 3D printer heating block cottons

Note:

1. The heat insulation cotton Does Not have the pre-punched holes, it’s easy to bore a hole.

Product Features

  • Package Included: 5 x Aluminum Heater Block + 10 x 2mm thick Heat Insulation Cotton.
  • HEATER BLOCK – Made of durable Aluminum, Measures 20*20*10mm, Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Heating Block Cotton – High temperature-resistant cotton can work for a long time at 900 degrees, 2mm thick heating block cotton For 3D printer hotend nozzle heat insulation.
  • Compatibility – Heating Aluminum Block for MK7 MK8 Makerbot 3D Printer structure, works with extruder nozzle throat & heat-insulated cotton.
  • Heater Mounting Hole: 6mm diameter, Thermocouple Mounting Holes:3mm diameter.

Visit The Website For More Information…

Gaoxing Tech. All Metal Right Hand MK8 Extruder Aluminum Frame Block DIY Kit for Reprap i3 3D Printer

Description:

This kit can help you improve your print quality by getting rid of filament slippage. Aluminum doesn’t soften at printing temp like the plastic printed parts can, leading to less idler spring tension, filament slipping, bad prints.
Hardware is included in the kit, but you might also need additional screws to mount heatsink with fan, for an example.
Short distance
Stepper Motor: 42HD4027-01
See supplied datasheet for optional 57 oz-in NEMA 17 stepper motor (The last picture)

Package included:

1 x Aluminum main extruder body
1 x Aluminum tension lever
1 x Idler bearing for 1.75mm filament
1 x Brass drive gear
1 x High tension spring
1 x Assembly screws
Stepper Motor NOT includes

Product Features

  • High quality 3D printer accessories
  • MK8 extruder aluminum block DIY kit
  • Makerbot dedicated single nozzle
  • Makerbot dedicated double nozzle (Right Verison)
  • MK8 extruder aluminum block DIY kit (Stepper Motor Not Included)

Click Here If You Need More Detailed Info…

DROKĀ® 5 Meters GT2 Timing Belt Rubber Made 2GT MXL 6mm Width Synchronous Aluminum Belt 3D Printer Accessories Timing Belts Kit for Motorized Camera Slider/ Belt Sander/ Motorcycle/ Vehicle

Product Parameters:
Material: Rubber
Model: GT2/2GT/MXL
Length: 5 meters
Width: 6mm
Pitch: 2.032mm

Application:
3D printer; motorized camera slider; belt sander; dishwasher; packing machinery; motorcycle; vehicle; mining equipment; dryer; conveyor and etc.

NOTE:
1. No folding, in order to avoid damage to the skeleton material, cause negative impact on the strength of the timing belt.
2. Avoid contact with chemicals (especially strong oxidizing acid, such as concentrated sulfuric acid, etc.).
3. Avoid contact with oil and water for a long-term.
4. When change the timing belt, the belt cannot take out unless the tension of the belt reduced to the lowest level and cannot use non-professional tools to pry it down.

Package Includes:
1* 5 Meters Timing Belt

Product Features

  • This product is made of rubber, its length is 5 meters, width is 6mm and pitch is 2.032mm.
  • Our timing belt has wide application that it can be used for 3D printer, motorized camera slider, belt sander, dishwasher, packing machinery, motorcycle, vehicle; mining equipment, dryer, conveyor and etc.
  • Our product is enough for you to use in various applications because it has 5 meters; And remember not to fold it.
  • Please avoid contact with chemicals (especially strong oxidizing acid, such as concentrated sulfuric acid, etc.) and avoid contact with oil and water for a long-term.
  • When change the timing belt, the belt cannot take out unless the tension of the belt reduced to the lowest level and cannot use non-professional tools to pry it down.

Visit The Website For More Information…

3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory (Left Hand)

Features
1. MK8 remote printer head right hand (not included steppter motor )
2.This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
3.3D Printer MK8 Bowden Extruder kit v4.Used for 1.75mm/3mm filament, Reprap, Makerbot
5.Type: Left hand

Note:
Please note this set does not include steppter motor!

Specifications
Material:Full Metal Aluminum Alloy
Color: As shown

Package Including
1* MK8 extruder DIY kits (Left hand version)

Product Features

  • Used for 1.75mm filament, Reprap, Makerbot ,Prusa 3D Printer
  • Equipped with two pneumatic fittings, the feed process more smoothly.
  • Type: Left hand
  • 3D Printer MK8 Bowden Extruder kit
  • Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)

Detailed Information available on our Homepage…