Fafalloagrron UV Resin Curing Light 405nm Solidify Photosensitive LED Lamp 60W Output Accessories for SLA DLP 3D Printer US EU


Description:
Tips:
Due to the strong output of UV light, please utensils protective device for the eyes when using this light.

Specification:
Luminous Wavelength: 405nm
Input Voltage: 110-260V
Frequency: 150- 60H2
Standard Plug: US, EU
Color: Gray
Dimension: 115x85x90mm/ 4.53×3.35×3.54in
Quantity: 1 Pc

Note:
1.No retail package.
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x UV Light

Product Features

  • The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.
  • The resin can cure in 10-15 seconds from a distance of 5 cm from the light, but thicker parts require more time.
  • The lamp can be used in DIY curing packages or handheld applications.
  • Due to the strong ultraviolet light output, please use eye protection when using this light.
  • Package includes:1 Piece UV Resin Curing Light,1 Piece UK Power Adapter

Click Here For More Information

ANYCUBIC 3D Printer 405nm Resin for Photon DLP LCD Uv Printing Rapid Resin 500ml (Clear)

Parameter information: 
Size:500g/500ml
More Colors: Grey,Black,White,Transparent Green,Transparent Yellow
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Resin parameters:
Solidify wavelength:405nm 
Hardness (D): 79.0 
Viscosity (25 ℃): 552.0 mpa.s 
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3 
Flexural strength:23.4 Mpa 
Tensile strength: 23.4 Mpa 
Elongation frequency:14.2 %
  Shelf life: 1 year 
Features: UV light will solidify the resin 

Precautions: 
1. Storage method:
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
2.Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).

Product Features

  • Professional LCD molding resin. ▶ Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
  • High-speed solidify. ▶ This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
  • Strong adhesion of the model and easy to detach after forming. ▶ Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
  • The material is rigid and tough. ▶ Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
  • Model’s performance is stable. ▶ The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Check Out Our Website For Details…

ANYCUBIC 405nm Rapid Resin for 3D Printer Photon DLP LCD Uv Printing Resin 500ml (White)

Parameter information: 
Size:500g/500ml
More Colors: Grey,Black,White,Transparent Green,Transparent Yellow
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Resin parameters:
Solidify wavelength:405nm 
Hardness (D): 79.0 
Viscosity (25 ℃): 552.0 mpa.s 
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3 
Flexural strength:23.4 Mpa 
Tensile strength: 23.4 Mpa 
Elongation frequency:14.2 %
  Shelf life: 1 year 
Features: UV light will solidify the resin 

Precautions: 
1. Storage method:
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
2.Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).

Product Features

  • Professional LCD molding resin. ▶Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
  • High-speed solidify. ▶This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
  • Strong adhesion of the model and easy to detach after forming. ▶Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
  • The material is rigid and tough. ▶Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
  • Model’s performance is stable. ▶The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Check Out Our Website For Details…

ANYCUBIC 405nm Rapid Resin for Photon DLP LCD Uv Printing Resin 1000ml (White)

Parameter information: 
Size: 1000ml
More Colors: White,Black,Transparent Yellow,Transparent Green,Transparent Color
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Resin parameters:
Solidify wavelength:405nm 
Hardness (D): 79.0 
Viscosity (25 ℃): 552.0 mpa.s 
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3 
Flexural strength:23.4 Mpa 
Tensile strength: 23.4 Mpa 
Elongation frequency:14.2 %
  Shelf life: 1 year 
Features: UV light will solidify the resin 

Precautions: 
1. Storage method:
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
2.Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).

Product Features

  • Professional LCD molding resin. ▶Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
  • High-speed solidify. ▶This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
  • Strong adhesion of the model and easy to detach after forming. ▶Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
  • The material is rigid and tough. ▶Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
  • Model’s performance is stable. ▶The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Check Out Our Website For Details…