3D Printer Kit with Mega 2560 Board + RAMPS 1.4 Controller + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for 3D Printer

Features:
Brilliant 3D Printer Accessories Set meets most needs.
Including RAMPS 1.4 Board, LCD12864, Arduino-Compatible Mega 2560 R3, A4988 StepStick Stepper Motor Module, and other accessories.

12864 LCD Controller:
This Full Graphic Smart Controller Contains a SD-Card Reader, an Rotary Encoder and a 128 x 64 Dot Matrix LCD Display.
You can easy Connect it to your Ramps Board using the “Smart Adapter” included.
After Connecting this Panel to your Ramps you don’t need your pc any more, the Smart Controller Supplies Power for your SD card.
Further more all Actions like Calibration, Axes Movements can be Done by just using the Rotary Encoder on the Smart Controller.
Print your 3D Designs without PC, just with a G-Code Design Stored on the SD Card.

RAMPS 1.4:
Fully Assembled & Tested, No Soldering Required.
The Modular Design includes Plug in Stepper Drivers and Extruder Control Electronics on an Arduino MEGA Shield
For Easy Service, Part Replacement, Upgrade-Ability and Expansion.

Mega 2560 R3 Board:
Microcontroller: ATMEGA2560-16AU
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz

A4988 Stepper Motor Driver Package Includes: 1 x 3D Printer Controller RAMPS 1.4 Board
1 x LCD12864 Intelligent controller
1 x Arduino-Compatible Mega 2560 R3
5 x A4988 StepStick Stepper Motor Driver Module with Heatsink
1 x Adapter
2 x FC flat cable
1 x USB Cable

Product Features

  • Brilliant 3D Printer Accessories Set meets most needs. Including RAMPS 1.4 Board, LCD12864, Arduino-Compatible Mega 2560 R3, A4988 StepStick Stepper Motor Module, and other accessories.
  • This full graphic Smart LCD12864 Intelligent controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display.
  • RAMPS (RepRap Arduino-compatible MEGA Pololu Shield) is designed to fit the entire electronics needed for a RepRap in one small controller for a lower cost and a smaller size.
  • Arduino-Compatible Mega 2560 R3 is fully compatible with the original Arduino MEGA 2560 R3, able to use all the Arduino open source platform to create or learn interactive objects.
  • A4988 StepStick Module is a complete microstepping motor driver with built-in translator for easy operation.

Click Here If You Need More Detailed Info…

WINSINN 3D Printer Controller Kit For Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.6 Upgraded Mosfet + 5Pcs DRV8825 Stepper Motor Driver + LCD 12864 for Arduino Reprap


Ramps 1.6 board:

-Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be up to 200W, or smaller than 200W.

DRV8825 Driver:

-Suitable for driving below 8.2V ~ 45V 2.5A stepper motor
-Six different stepping resolutions: full, half, 1/4,1/8,1/16,1/32
-Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate
-Automatic current decay mode detection / selection
-Thermal shutdown circuit, undervoltage lockout, crossover current protection
-Ground short-circuit protection and load short-circuit protection

Mega 2560 R3:

-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limits):6-20V
-Digital I/O Pins:54 (of which 14 provide PWM output)
-Analog Input Pins:16
-DC Current per I/O Pin:40 mA
-DC Current for 3.3V Pin:50 mA
-Flash Memory:256 KB of which 4 KB used by bootloader
-SRAM:8 KB
-EEPROM:4 KB

—————————————————————————————————————

Package include:
►1 x RAMPS 1.6 Board
►1 x Mega 2560 R3 Board
►1 x 12864 LCD Display Controller
►1 x LCD Smart Adapter
►5 x DRV8825 Stepper

———————————————————————————————————————

►Note:
►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • ✔️DRV8825 driver board widely used in 3D printers and small CNC machines. It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance. It suitable for driving below 8.2V ~ 45V 2.5A stepper motor, And had Six different stepping resolutions: full, half, 1/4 ,1/8, 1/16, 1/32.
  • ✔️12864 LCD: The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using “smart adapter” included. This panel connect your RAMPS 1.6, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller.
  • ✔️This kit includes a complete set of the most common and useful components that can be used by all tech-savvy people out there to build their own printer controller. A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • ✔️Product Warranty: WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty. If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
  • ✔️Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be samller than 200W.

Click Here If You Need More Detailed Info…

TECNOIOT 3D Printer Kit for Arduino Mega 2560 R3 Development Board + RAMPAS 1.4 Controller + 5pcs DRV8825 Stepper Motor Module + 6pcs Endstop

Mega 2560: 

La junta de Mega 2560 es un microcontrolador basado en el Atmega2560. Tiene 54 pines digitales de entrada/salida (de los cuales 14 pueden usarse como salidas PWm), 16 entradas analógicas, 4 UART (puertos de serie de hardware), un oscilador de cristal de 16 Mhz, conexión USB, una entrada de alimentación, calentador ICSP y botón de reseteado.

Placa controladora RAMPS 1.4:
Salida de calentador/ventilador y tres circuitos termistores MOSFET.
Seguridad adicional FUSION 5 A y protección de componentes.
Fusible adicional de control de calefacción de 11 A.
Adecuado para placa de controlador paso a paso 5 Pololu.
Entrada de pin de placa de Pololu, fácil de reemplazar y quitar.
Pines I2C y SPI para uso prolongado; todos los MOSFET a pines PWM para proporcionar versatilidad.
Salida de corriente nominal: 3 A, LED indica cuando funciona el calentador.
DRV8825 Stepper Motor Driver: 
1)*Suitable for driving below 8.2V ~ 45V 2.5A stepper motor  
2)*Six different stepping resolutions: full, half, 1 / 4,1 / 8,1 / 16,1 / 32.  
3)*A simple steps and direction control interface.  
4)*Automatic current decay mode detection / selection.  
5)*Thermal shutdown circuit, undervoltage lockout, crossover current protection.  
6)*Ground short-circuit protection and load short-circuit protection.  

Endstop 
Línea roja conecta VCC (rampas de +)
Conecta el cable GND negro (rampas de -)
Señal de conexión de línea verde (rampas en s)

Package Contains:

1pc x MEGA 2560 R3
1pc x RAMPS 1.4 Control Panel
5pcs x DRV8825 Stepper Motor Driver Module
6pcs x Mechanical Endstop

Product Features

  • 【3D Printer】 All actions such as calibration, axis movements can be performed simply using the rotary encoder in the intelligent controller. Print your 3D designs without a PC, only with a G-Code design stored on the SD card
  • 【Ramps1.4】 RAMPS interconnects a Mega Arduino compatible with the powerful MEGA platform supported by Arduino and has plenty of room for expansion
  • 【MEGA2560】 The Mega 2560 is compatible with most of the shields designed for the Arduino Duemilanove, or Diecimilaa4988 is a complete Microstepping motor controller with integrated translator for easy handling. Mega 2560 R3, with this product, you can use the entire open source Arduino platform to create or learn interactive objects.
  • 【DRV8825】 DRV8825 is a complete microstepping motor controller with integrated translator for easy operation.DRV8825 is the upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT

Click Here If You Need More Detailed Info…

ARCELI 5Pcs of Mechanical End Stop Switch with Cable for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280

Eigenschaften:
Verbindungsbeschreibung:
Rote Linie verbindet VCC (Rampen von +)
Verbinden Sie das schwarze Kabel GND (Rampen von -)
Green Line Verbindung SIGNAL (Rampen in s)
Tipps: Unter normalen Umständen muss das System mindestens auf drei mechanische Schalter konfiguriert sein.
Vorteile: Einfach zu installieren
Kabellänge: 70 cm
Größe: 32 x 10 mm
Menge: 5 Satz

Paket enthalten:
5 x mechanischer Schalter Endshop
5 x 3Pin 70cm Kabel

Product Features

  • Mechanical Endstop kit is for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.
  • Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
  • Not easy to break, convenient for plug, ease for use, one side is an integrated plug.
  • Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s)

Click Here For More Information