UEETEK 20pcs Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Description

This item is manufactured with top-class heat-resistant ceramic fiber material for durable and practical use. It is used for 3D printer nozzle keeping warm. It is with super good heat insulation for better printing effect. You can design a suitable size to make a hole of the heating block cotton.

Features

– Color: Yellow.
– Material: Ceramic fiber.
– Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).
– Can work for a long time in a high temperature below 300 degrees.
– Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
– Resistance to thermal shock, low thermal conductivity and thermal capacity.
– Perfect for keeping 3D printer nozzle warm and bringing better printing effect.

Package Including
20 x Heating Block Cotton for 3D Printer Hotend Nozzle Heat Insulation 3mm

Product Features

  • Can work for a long time in a high temperature below 300 degrees.
  • Premium material with good elasticity, heat insulation and small shrinkage. Saving power and energy.
  • Resistance to thermal shock, low thermal conductivity and thermal capacity.
  • Perfect for keeping 3D printer nozzle warm and bringing better printing effect.
  • Size: Approx. 6.8 x 1.8 x 0.3cm/ 2.7 x 0.7 x 0.12 inch (LxWxH).

Visit The Website For More Information…

HALJIA 20pcs Timing Belt Tensioner Torsion Spring For 3D Printer

It fits for 3D printer timing belt system.
Fits for the belt width: 6mm.
Constant force to Keep the belt reasonably tight to prevent miss step, skip step or unwanted movements.

Specification:
Material:Metal
Color:Silver

Packing List:
20 x Torsion Spring

Product Features

  • Type: Torsion Spring
  • Steel wire diameter:1mm
  • Outside Spring Diameter:4mm
  • Used for 6mm width GT2 timing Belts
  • Package Included: 20 x Torsion Spring

Click Here For More Information

WER Second Generation Freehand 3d Pen Drawing Doodling Pen 3D Printing Pen Doodler+Multicolor 20pcs 1.75mm PLA Filament (Yellow)

Product Parameters:
Extrusion : Hot melt extrusion molding accumulation
Forming: Three-dimensional
Print Range :Indefinite
Spinning speed : Adjustable
Heating temperature in the range :160- 250 degrees Adjustable
Device operating voltage : 12V 3A
Nozzle :0.7 mm
Product packing list:
3D stereoscopic printing pen with LCD screen
12V 3A Power Adapter
3 free filaments 10g each
Instructions for operation:
1.Connect one of the end of the Power Adapter and AC power cord to socket. And connect the other end of the DC plug into the “Power” port on the end of the pen. You can see the yellow LED lights, indicating the device is powered and into servo standby model.
2.Press “Wire Feeding Button”,you can see stunning LED lights, indicating the device has entered the warm-up model, about 0.5-2 minutes later, when the red LED lights turns from red to blue, indicating the end of warm-up, the device is ready for normal operation.
3.Insert the filament into ” Wire Loading Hole”, meanwhile, you may use your another hand to press “Wire Feeding Button”, then supplies will be transported by the built-in motor, the tip end of the nozzle will spit gum,means you load successfully.
4.Your show time,The device is provided with stepless speed control function, in the creative process can be adjusted according to the glue line pen speed, no need to operation with both hands.
Warning:
1.Never touch the nozzle or the heat-generating components while operating.
2.If the device is not used more than five minutes, it will automatically goes to standby model.The “Indicator” show no light. To use it again, you need to press the “Wire Feeding Button”.
3.Children should use it under the tutelage of adult.

Product Features

  • PACKAGING INCLUDING: One 3d pen+20pcs PLA/ABS(Random) filament, 10M per piece, new generation; LED Screen.
  • FILAMENT: PLA or ABS filament are used, which melted at a high temperature to create a 3D object instead of just an idea on paper.
  • INSTRUCTION:Controllable temperature, you can easily control extrusion speed, temperature, filament
  • OPERATION:easy to use; Use it just like any other kind of pen by drawing normally at the beginning, with the nozzle pressed to paper, but then you lift it in the air and the pen keeps drawing; Is a best gift for both children and adults; children’s use, please under the tutelage of adult.
  • 3D PEN: 3D Pen for drawing, doodeling, arts, crafts Printing; for artists, hobbyist or creative lovers

Check Out Our Website For Details…

XinXu 20pcs 3.00mm PLA 3D Printer There are 20 Colors Each Color 10m 3D Printing Materials Filament

Product parameters:
Science of materials:
PLA
The printing temperature: 190 ℃ -210 ℃
Softening point:
60 ℃
air bubble:
100% no air bubble

Product Features

  • Biodegradable material, protecting the environment.
  • Print Product High brightness
  • Good liquidity, print is not easy to break.
  • Print a large area of the product is not easy to tilt
  • Printing process without smell emission

Check Out Our Website For Details…