HAWKUNG 3D Printer Nozzle Change and clean Tools.No more burnt fingers for you! This is a must have tool for changing and cleaning print nozzles. Having the right tools makes all the difference in the world!
V5 V6 0.4mm Nozzles:
Thread type: M6
Output diameter:0.4mm;Input filament diameter:1.75mm
Compatible: V5 and V6 extruder hotend Filament
Type: anti-Static,non-Magnetic precision tweezer
Tweezer length: 120mm
Wrench length: 120mm
Nozzle spanner suitable for nozzles with a diameter of 8 mm, such as V5 V6 nozzles.
Aluminum block spanner only fit for V6 heat block.
Nozzle and 3D printercleaning kit is a durable kit for different purposes; removes excess plastic and removes jams with high precision, and is also suitable for general maintenance of the heatsink section.
The wrench makes it easier to install and remove the nozzle.
10 x 0.4mm Brass Nozzles
10 x 0.35mm Cleaning Needles
5 x 0.4mm Cleaning Needles
2 x Precision Tweezer
2 x Wrench
1 x Plastic Bottle
- Total 29pcs include: 10pcs brass nozzle, 10pcs 0.35mm cleaning needles, 5pcs 0.4mm cleaning needles, 2pcs precise tweezers, 2pcs Spanner, 1pcs plastic bottle.
- Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
- Needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.
- V5 V6 nozzles: material:brass,thread type: M6,output diameter:0.4mm;Input filament diameter:1.75mm,compatible: V5 and V6 extruder hotend Filament,supported:ABS/PLA/PETG/Carbon Fiber
- Wrenches: Wrenches make nozzle installation and removal easier. Special spanner can help you adjustment 3D Printer and change extruder nozzle more easy. Nozzle spanner suitable for nozzles with a diameter of 8 mm, for V5 V6 nozzles.Aluminum block spanner only fit for V6 heat block.
Detailed Information available on our Homepage…
Material: Brass of National standard
Out Thread: M6
Filament Diameter: 1.75mm
Output Diameter: 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm
Quantity: 15 pcs
Compatibility: with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc. Installation: external M6 thread connection
How to replace nozzles ?
Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block to avoid scalding.
Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Small parts, please keep away from children.
- Package include:15 pcs 3d printer nozzles in 5 sizes (output diameter )2 x 0.2mm, 7 x 0.4mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm, With storage box packaging.
- COMPATIBILITY: mk8 nozzle are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap,Compatible with all 1.75mm ABS/ PLA 3D printer.
- Premium material: the cr10 nozzle are made of high quality brass material, Against rust or erosion,sturdy and durable, connect with M6 out thread, easy to install
- Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6,different sizes can meet your multiple needs.
- NOTE: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Click Here For More Information
Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only suitable for 3D printer using indoors Attention: Small parts, keep away from children Package including: 15PCS x 2mm heating block cotton 1PCS x6mm Kapton Tape WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.
- Heat preservation, keep the printer heating evenly and work better
- You can Punch Holes or Cut fit size to the cotton.
- Recommend Safe Working Temperature : ＜300°C
- Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
- Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape
Visit The Website For More Information…
This item is manufactured with premium material for durable and long lasting use. The prints come off cleanly with no lines on the bottom from multiple pieces of tape. Easy to apply and remove, with strong adhesion. Perfect tape to use for your 3D Printer.
– Color: Blue.
– Material: Paper.
– Size: About 21 x 20cm/8.3 x 7.9inch(LXW).
– Made of high quality material, it is durable and long lasting use.
– Perfect tape to use for your 3D Printer.
– Prints come off cleanly with no lines on the bottom from multiple pieces of tape.
– Easy to apply and remove, with strong adhesion.
- Made of high quality material, it is durable and long lasting use.
- Perfect tape to use for your 3D Printer.
- Prints come off cleanly with no lines on the bottom from multiple pieces of tape.
- Easy to apply and remove, with strong adhesion.
- Package Including 15PCS 210mm x 200mm 3D Printer Heated Bed Blue High Temperature Tape Rubber Adhesive.
Detailed Information available on our Homepage…