0.4mm Drill Bits for 3D Printer Nozzle Cleaning Makerbot Mendel Reprap Pack of 10PCS

Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees ,Pack of 10 PCS 0.4mm drill bits

Product Features

  • Package Included: 10 x 0.4mm Drill Bits
  • Bit diameter: 0.4mm
  • Color is random
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Any question,pls feel free to contact us.

Click Here If You Need More Detailed Info…

EAONE 3D Printer Assembled Extruder Kits Hot End with 1.75mm Filament Direct Feed 12V Extruder 0.4mm Nozzle for MK8 Makerbot(Bonus: 2 pcs Extruder Tube and 2 pcs Brass Extruder Nozzle)


EAONE Assembled Extruder Kits Hot End for 3D Printer 1.75mm Filament Direct Feed 12V Extruder 0.4mm Nozzle (Bonus: 2 pcs Extruder Tube and 2 pcs Brass Extruder Nozzle)

Specification of Assembled Extruder Kits:

Type: Assembled Extruder Kits
The kits include: 1 pc Aluminum Heater Block, 1 pc 1.75MM Tube and 1 pc 0.4MM Brass Extruder Nozzle
Pre-wired thermistor to the updated heater block
Input Diameter: 1.75mm
Output diameter: 0.4mm
Voltage: 12V

Specification of Extruder Tube:

Type: Nozzle Throat
Compatibility: 3D Printer
Outer Thread: M6
Nozzle Throat Outer Diameter: 7mm
Nozzle Throat Inner Diameter: 4mm
Teflon Pipe Inner Diameter: 2mm
Length: 30mm
Filament Diameter: 1.75mm
Material: Stainless Steel

Specification of Brass Nozzle:

Type: 0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Attention: Small parts, keep away from children

package including:

1 x Assembled Extruder Kits
2 x 3D Printer Nozzle Inputting Tube
2 x 3D Printer Extruder Brass Nozzle Print Head

Product Features

  • Set of 5: 1 pc Assembled Extruder Kits, 2 pcs 30MM Length Extruder 1.75MM Tube, 2 pcs 0.4MM Brass Extruder Nozzle
  • Compatible with all 1.75mm PLA ABS printer
  • Input diameter: 1.75mm; Output diameter: 0.4mm; Voltage: 12V
  • Installation: external M6 thread connection
  • Plenty of MK8 clone nozzles compatible with this hotend – nozzle replacement is easy

Click Here If You Need More Detailed Info…

UEETEK 5pcs 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

Features

– Color: Silver.
– Material: Stainless Steel.
– Bit diameter: 0.4mm.
– Bit length: 16mm.
– The length of shank: 20mm.

Product Features

  • These drill bit extruder nozzle cleaners are an essential item for any 3D printer owner.
  • These nozzles are very difficult to clean properly. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints.
  • They can provide great convenience for your 3D printer nozzle cleaning.
  • Provide great convenience for your 3D printer nozzle cleaning.Extend the life of your nozzle and without a doubt, produce finer prints.
  • Package Including´╝Ü1 * Set of 5pcs 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

Click Here If You Need More Detailed Info…

WheateFull 5PCS 0.4mm Brass Extruder Nozzle Print Heads + 5PCS M6*26mm/30mm/40mm/50mm Stainless Steel Throat Pipe Extruder with PTFE Tube Built Teflon for MK8 Makerbot 3D Printer Extruder Hotend 1.75mm (0.4mm+40mm)

Specification of Extruder Tube:

Type : Nozzle Throat
Material : Stainless Steel
Compatibility : 3D Printer
Outer Thread : M6
Inner Diameter : 4mm/2mm
Length : 26mm/30mm/40mm/50mm
Filament Diameter : 1.75mm

Specification of Brass Nozzle:

Type :0.4mm Extruder Brass Nozzle Print Head
Material: brass.
Size: 6*13mm.
Input Diameter: 1.75mm.
Output Diameter: 0.4mm.
Compatible: compatible with all 1.75mm PLA ABS printer.

Package Included:
5 x 3D Printer Extruder Hotend 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head

Attention:
1. Small parts, keep away from children!!!
2. Extruder Tube is 26mm, which cannot compatible with Geeetech i3 pro B. But the Brass Nozzle can compatible with Geeetech i3 pro B.

Product Features

  • Nozzle Throat: Material – Stainless Steel; Outer Thread – M6; Inner Diameter – 4mm/2mm; Length – 26mm/30mm/40mm/50mm; Filament Diameter – 1.75mm.
  • Brass Nozzle: Material – copper (brass); Size – 6*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Diameter: 0.4mm. Package Included: 5 x 3D printer extruder hotend 1.75mm nozzle throat; 5 x 3D printer 0.4mm extruder brass nozzle print head.
  • Compatible with all 1.75mm PLA ABS printer.
  • Great tools for 3D printer extruder.

Detailed Information available on our Homepage…